• Smart Structures and Systems
• /
• 제22권3호
• /
• pp.341-358
• /
• 2018

This present study investigates Love-type wave propagation in composite structure consists of a loosely bonded functionally graded piezoelectric material (FGPM) stratum lying over a functionally graded initially-stressed fibre-reinforced material (FGIFM) substrate. The closed-form expressions of the dispersion relation have been obtained analytically for both the cases of electrically open and electrically short conditions. Some special cases of the problem have also been studied and the obtained results are found in well-agreement with the classical Love wave equation. The emphatic influence of wave number, bonding parameter associated with bonding of stratum with substrate of the composite structure, piezoelectric coefficient as well as dielectric constant of the piezoelectric stratum, horizontal initial stresses, and functional gradedness of the composite structure on the phase velocity of Love-type wave has been reported and illustrated through numerical computation along with graphical demonstration in both the cases of electrically open and electrically short condition for the reinforced and reinforced-free composite structure. Comparative study has been carried out to analyze the distinct cases associated with functional gradedness of the composite structure and also various cases which reveals the influence of piezoelectricity, reinforcement and horizontal initial stress acting in the composite structure, and bonding of the stratum and substrate of the composite structure in context of the present problem which serves as one of the major highlights of the study.

• 한국전자파학회논문지
• /
• 제10권4호
• /
• pp.550-563
• /
• 1999

본 논문은 시변 맥스웰 방정식에 기초한 웨이브릿-갤러킨 설계를 제안하였다. 두 개의 모멘트 함수가 0 이 되는 Daubechies 웨이브릿 함수를 기저함수로 전개하고 Yee가 제안한 Leap-frog 접근법을 적용하였다. D Daubechies 웨이브릿의 변위된 보간 특성을 이용하여 적분이나 매체 연산자에 대한 부가적인 행렬이 필요없 는 방정식을 유도하였다 안정화 조건을 유도하고 분산특성을 분석한 후 유한차분 시간영역법과 다해상도 시 간영역법의 결과와 비교하였고. 분산특성의 분석을 통해 기저함수의 정규성(Regularity)과 받침폭(Support width) 사이의 균형을 확인했다. 기저함수가 단 2개의 0이 되는 웨이브릿 모멘트 함수를 가지지만. 이는 수치 해석 상에서 무시할 수 있는 분산 오류를 수반하였고, 컴팩트 받침(Compact support)에 의해 노드 당 적은 수의 계수만이 고려되었다. 제안된 설계의 저장계수의 효율, 실행 시간의 감소와 정확도를 균일 공진기와 비 균일 공진기의 공진주파수 해석을 통해 검증하였다.

• 한국통신학회논문지
• /
• 제21권12호
• /
• pp.3277-3285
• /
• 1996

In this paper, w designed an opical power distribution device for application to an optical switching and an optical subscriber loop. We fabricated PSG thin film by LPCVD. Based on the measured index of fabricted thin film, rib-type waveguide was transformed to two-dimension by the effective index method and we simulated dispersion property to find asingle-mode condition. We found that the optimum design parameters of rib-type waveguide are:cladding layer of 3.mu.m, core layer of 3.mu.m, buffer layer of 10.mu.m, and core width of 4.mu.m. Each side of the guiding region was etched down to 4.mu.m to shape the core. We used these optimum parameters of the rib-type waveguide with branching angle of 0.5.deg. and simulted the Y-branch waveguide by the BPM simulation. Numerical loss in branching area was claculated to be 0.1581dB and equal to the total loss of the Y-branch. The loss of the fabricated Y-branch waveguide on PSG film ws 1.6dB at .lambda.=1.3.mu.m before annealing but was 1.2dB after annealing at 1000.deg. C for 10 minutes. Consequently, the loss of branching area from 3000.mu.m to 6000.mu.m in the z-direction was 0.8dB, and single-mode propagation was confirmed by measuring the near field pattern. For coupling the fabricated Y-branch waveguide with an optical fiber, we fabricated V-groove which was used as the upholder of optical fiber. An etching angle was 54.deg. and the width and depth of guiding groove was 150.mu.m, 70.mu.m, respectively. The optical fiber is inserted onto V-groove. Both the Y-branch and V-groove were connected through the index matching oil. Coupling loss after connecting Y-branch and the optical fiber on V-groove was 0.34dB and that after injecting index mateching oil was 0.14dB.

• 한국환경과학회지
• /
• 제26권5호
• /
• pp.621-638
• /
• 2017

Meteorological characteristics related to variations in ozone ($O_3$) concentrations in the Korean peninsula before, during, and after Typhoon Talas (1112) were analyzed using both observation data and numerical modeling. This case study takes into account a high $O_3$ episode (e.g., a daily maximum of ${\geq}90ppb$) without rainfall. Before the typhoon period, high $O_3$ concentrations in the study areas (e.g., Daejeon, Daegu, and Busan) resulted from the combined effects of stable atmospheric conditions with high temperature under a migratory anticyclone (including subsiding air), and wind convergence due to a change in direction caused by the typhoon. The $O_3$ concentrations during the typhoon period decreased around the study area due to very weak photochemical activity under increased cloud cover and active vertical dispersion under a low pressure system. However, the maximum $O_3$ concentrations during this period were somewhat high (similar to those in the normal period extraneous to the typhoon), possibly because of the relatively slow photochemical loss of $O_3$ by a $H_2O+O(^1D)$ reaction resulting from the low air temperature and low relative humidity. The lowest $O_3$ concentrations during the typhoon period were relatively high compared to the period before and after the typhoon, mainly due to the transport effect resulting from the strong nocturnal winds caused by the typhoon. In addition, the $O_3$ increase observed at night in Daegu and Busan was primarily caused by local wind conditions (e.g., mountain winds) and atmospheric stagnation in the wind convergence zone around inland mountains and valleys.

• 대한기계학회논문집B
• /
• 제34권7호
• /
• pp.665-670
• /
• 2010

등방성 난류에서 부유된 무거운 입자의 운동에서, 입자의 회전이 고려되었을 때 입자의 분산 특성에 나타난 변화를 살펴보았다. 입자의 회전을 고려함으로 인해 추가로 고려되는 양력은 그 크기가 작은 것으로 알려져 있고, 따라서 많은 연구에서 회전에 의한 효과는 무시되었다. 본 연구에서는 라그랑지안 기법으로 추적한 입자의 궤적에 미치는 양력의 크기를 속도와 가속도의 자기상관함수 및 확률밀도함수를 통해 정량적으로 살펴보았다. 속도 통계량에서는 양력에 의한 효과가 무시할 만 했으나, 가속도와 관련된 통계는 양력에 의한 영향이 있는 것으로 확인되었다. 난류의 가속도는 간헐성을 띄며, 간헐적인 특성은 난류 구조와 관련이 있다는 것이 알려져 있다. 따라서 입자에 작용하는 양력과 난류구조에 연관성이 있다는 유추가 가능하다.

• 한국환경과학회:학술대회논문집
• /
• 한국환경과학회 2003년도 International Symposium on Clean Environment
• /
• pp.19-26
• /
• 2003

The dispersion of recycled particulates in the complex coastal terrain containing Kangnung city, Korea was investigated using a three-dimensional non-hydrostatic numerical model and lagrangian particle model (or random walk model). The results show that particulates at the surface of the city that float to the top of thermal internal boundary layer (TIBL) are then transported along the eastern slope of the mountains with the passage of sea breeze and nearly reach the top of the mountains. Those particulates then disperse eastward at this upper level over the coastal sea and finally spread out over the open sea. Total suspended particulate (TSP) concentration near the surface of Kangnung city is very low. At night, synoptic scale westerly winds intensify due to the combined effect of the synoptic scale wind and land breeze descending the eastern slope of the mountains toward the coast and further seaward. This increase in speed causes development of internal gravity waves and a hydraulic jump up to a height of about 1km above the surface over the city. Particulate matter near the top of the mountains also descends the eastern slope of the mountains during the day, reaching the central city area and merges near the surface inside the nocturnal surface inversion layer (NSIL) with a maximum ground level concentration of TSP occurring at 0300 LST. Some particulates were dispersed following the propagation area of internal gravity waves and others in the NSIL are transported eastward to the coastal sea surface, aided by the land breeze. The following morning, particulates dispersed over the coastal sea from the previous night, tend to return to the coastal city of Kangnung with the sea breeze, developing a recycling process and combine with emitted surface particulates during the morning. These processes result in much higher TSP concentration. In the late morning, those particulates float to the top of the TIBL by the intrusion of the sea breeze and the ground level TSP concentration in the city subsequently decreases.

• Composites Research
• /
• 제26권1호
• /
• pp.72-78
• /
• 2013

불연속 탄소섬유-에폭시 복합재의 저항발열 특성에 관한 연구를 수행하였다. 1, 3, 5 wt.% 불연속 탄소섬유가 함유된 복합재 시험편을 초음파 처리와 캐스트 몰딩(cast molding)을 이용하여 제조하였다. 시편에 DC 전류 인가시 발생되는 저항열에 의한 시편의 표면온도 변화를 적외선 카메라를 이용하여 측정하였다. 발열온도를 예측하기 위해서 유한요소해석을 수행하였는데, 실측된 온도와 부합함을 확인하였다. 탄소섬유의 함량과 인가전압이 증가할수록 발열저항에 의해서 발생된 열은 증가함을 확인하였다. 복합재 내에서 균일한 온도분포를 얻기 위해서는 탄소섬유의 분산상태가 중요하며, 대기온과 습도 등 실험환경이 발열온도에 영향을 미치는 것으로 나타났다.

• Earthquakes and Structures
• /
• 제15권4호
• /
• pp.369-382
• /
• 2018

A free vibration analysis and wave propagation of functionally graded porous beams has been presented in this work using a high order hyperbolic shear deformation theory. Unlike other conventional shear deformation theories, a new displacement field that introduces indeterminate integral variables has been used to minimize the number of unknowns. The constituent materials of the beam are assumed gradually variable along the direction of height according to a simple power law distribution in terms of the volume fractions of the constituents. The variation of the pores in the direction of the thickness influences the mechanical properties. It is therefore necessary to predict the effect of porosity on vibratory behavior and wave velocity of FG beams in this study. A new function of the porosity factor has been developed. Hamilton's principle is used for the development of wave propagation equations in the functionally graded beam. The analytical dispersion relationship of the FG beam is obtained by solving an eigenvalue problem. Illustrative numerical examples are given to show the effects of volume fraction distributions, beam height, wave number, and porosity on free vibration and wave propagation in a functionally graded beam.

• Journal of Korean Society for Atmospheric Environment
• /
• 제10권E호
• /
• pp.357-370
• /
• 1994

지역 규모 대기 모형과 결합된 오일러 장거리수송 모형이 제시되었다. 이 모형을 Cross-Appalachian Tracer Experiment (CAPITX)의 2개 사례에 나타난 추적물 농도 분포 모사에 적용하였다. 기상장은 CSU RAMS에 4차원 자료 동화 기법을 도입하여 도출하였고, 추적물 수송은 오일러 확산 모형으로 계산된다. 4차원 자료 동화 기법을 포함한 대기 모형은 관측과 잘 일치하는 기상장을 도출하였으며, 장거리 수송 예측에 이용될 다양한 기상 자료의 도출을 위한 매우 적절한 도구가 될 수 있음을 보였다. 이 연구에서 개발된 수송 모형은 관측 농도 분포가 복잡한 구조를 보인 사례에 대해서는 부분적인 성공을 거두었으나, 대체로 관측된 추적물 수송을 유사하게 모사하였다. Bott's 2nd-order scheme을 사용한 결과는 Bott's 4th-order scheme을 사용하고 명시적인 수평 확산을 증가시킨 경우와 유사한 수행 능력을 보였다. 이 대기 모형과 수송 모형은 상세한 구름 및 화학 과정들을 고려한 산성 침적 모형의 훌륭한 기본 틀이 될 수 있을 것으로 생각된다.

• Journal of Electrical Engineering and Technology
• /
• 제9권1호
• /
• pp.301-306
• /
• 2014

We proposed a new PCB-type 'common-mode current($I_c$) and differential-mode current($I_d$) detector' working for fast detection of $I_c$ and $I_d$ from the differential-mode signaling, with miniaturization effect and possibility of cheaper fabrication. In order to realize this device, we suggest a branch-line-coupler balun having a composite right- and left-handed(CRLH) one-layer microstrip phase-shifting line as compact as roughly ${\lambda}_g/14$. The presented balun obviously is different from the conventional bent-&-folded delay lines or slits on the ground for coupling the lines on the top and bottom dielectrics. As we connect the suggested balun output ports of the differential-mode signal lines via the through-port named U and coupled-port named L, $I_c$ and $I_d$ will appear at port ${\Delta}$ and port ${\Sigma}$ of the present device, in order. The validity of the design scheme is verified by the circuit-and numerical electromagnetic analyses, and the dispersion curve proving the metamaterial characteristics of the geometry. Besides, the examples of the $I_c$ and $I_d$ indicator are observed as the even and odd modes in differential-mode signal feeding. Also, the proposed device is shown to be very compact, compared with the conventional structure.