• 한국군사과학기술학회지
• /
• 제13권5호
• /
• pp.717-724
• /
• 2010

The initial trajectory of a spheroid configuration bobbin for precision guidance has been investigated by analyzing its aerodynamic load and six-degree-of-freedom motion. The effects of changes in the spheroidal head configuration, flow angle and lateral center-of-gravity offset are numerically studied using the commercial software "FLUENT". A wind tunnel test is also conducted to validate the numerical scheme and to examine effect of the Reynolds number on the flow around the bobbin. It is shown that the size of the separation bubble formed on the surface decreases significantly when the Reynolds number is varied between 110,000 and 140,000. At a zero flow angle, an oblate spheroidal head shows relatively moderate rotation while a prolate spheroidal head shows rapid rotation. The bobbin with a spherical head shape has little effect on the flow direction; however, the oblate bobbin is sensitive to the flow angle. The roll motion of the bobbin is greatly influenced by the lateral center-of-gravity offset and maximum dispersion is observed at half of the radius.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 1987년도 제29회 수공학연구발표회논문초록집
• /
• pp.159-168
• /
• 1987

하용에서 수질 시뮬레이숀에 의한 시간적, 공간적 수질예측은 하용 수질관리를 위한 계획수립, 설계 및 모형의 최적화에 필요한 자료를 제공해 준다. 본 연구는 대청댐 하류에서 부여백제대교에 이르는 금강수계에서의 QUAL II 모형의 적용에 관한 것이다. QUAL II모형에서 사용된 물질수지방정식에 근거를 둔 대류-분석모형과 그 수치해석법을 제시하였다. 하용을 따르는 BOD, DO 및 수온의시뮬레이숀괍과 실측값과의 비교분석을 통한 모형의 활용성 제고에 역점을 두었다. 이러한 과정을 통해 금강에서의 하용수질을 평가하고, 탈산소 계수, 재폭기 계수 및 자정계수의 값을 추정하였다. 또한 대청댐 방류량 조절에 의한 목표하는 DO의 유지에 대하여 논의하였다.

• Journal of Mechanical Science and Technology
• /
• 제19권12호
• /
• pp.2312-2320
• /
• 2005

The aerodynamic effects of leading-edge accretion can raise important safety concerns since the formulation of ice causes severe degradation in aerodynamic performance as compared with the clean airfoil. The objective of this study is to develop a numerical simulation strategy for predicting the particle trajectory around an MS-0317 airfoil in the test section of the NASA Glenn Icing Research Tunnel and to investigate the impingement characteristics of droplets on the airfoil surface. In particular, predictions of the mean velocity and turbulence diffusion using turbulent flow solver and Continuous Random Walk method were desired throughout this flow domain in order to investigate droplet dispersion. The collection efficiency distributions over the airfoil surface in simulations with different numbers of droplets, various integration time-steps and particle sizes were compared with experimental data. The large droplet impingement data indicated the trends in impingement characteristics with respect to particle size ; the maximum collection efficiency located at the upper surface near the leading edge, and the maximum value and total collection efficiency were increased as the particle size was increased. The extent of the area impinged on by particles also increased with the increment of the particle size, which is similar as compared with experimental data.

• Journal of Information Processing Systems
• /
• 제16권4호
• /
• pp.832-844
• /
• 2020

The degree of dispersion of a random variable can be described by the variance, which reflects the distance of the random variable from its mean. However, the time complexity of the traditional variance calculation algorithm is O(n), which results from full calculation of all samples. When the number of samples increases or on the occasion of high speed signal processing, algorithms with O(n) time complexity will cost huge amount of time and that may results in performance degradation of the whole system. A novel multi-step recursive algorithm for variance calculation of the time-varying data series with O(1) time complexity (constant time) is proposed in this paper. Numerical simulation and experiments of the algorithm is presented and the results demonstrate that the proposed multi-step recursive algorithm can effectively decrease computing time and hence significantly improve the variance calculation efficiency for time-varying data, which demonstrates the potential value for time-consumption data analysis or high speed signal processing.

• 방사선산업학회지
• /
• 제6권1호
• /
• pp.41-47
• /
• 2012

A field tracer experiment using a radioisotope was conducted to analyze the transport and dispersion characteristics of pollutants in the coastal area near a Wolsung. A rod float including GPS was released to track the paths of radioisotope. NaI detector was installed to measure the released radioisotope from the boat, and measurements were performed with the real time. The measured tracer data by a field experiment can be used as the basic data for understanding the transport characteristics of pollutants and verifying numerical models near the offshore.

• Nuclear Engineering and Technology
• /
• 제7권2호
• /
• pp.107-118
• /
• 1975

천이금속을 구성하고 있는 성분 이온을 변형가능한 이온으로 취급함으로써 크로미움, 몰리브데늄 및 텅스텐의 격자진동을 전자각 모텔에 외해 수식화했다. 이 모델은 전하에 대한 두 변수와 다섯 개의 힘상수를 모두 합쳐 7개의 모텔상수를 포함하고 있으며 이들의 수치는 금속의 탄성 계수에 관한 자료와 중성자 산란 실험에 의해 측정된 격자진동의 특성 주파수 값과 일치하도록 하여 결정했다. 한편 전자각 모델은 Cr, Mo 및 W등 세 금속의 성파 확산곡선, 주파수 분포함수 및 비열을 계산하는데 응용하였고 그 결과를 실험치와 비교하였다. 이로부터 전자각 모델로도 천이금속의 격자진동에 대한 특성을 만족스럽게 설명할 수 있다는 것을 알아내었다. 또한 다른 격자 모델과의 비교를 통하여 전자각 모델의 유용성을 검토했다.

• Current Optics and Photonics
• /
• 제1권1호
• /
• pp.65-72
• /
• 2017

We propose a nearly lossless, compact, electrically modulated vertical directional coupler, which is based on the controllable evanescent coupling in a previously proposed graphene-assisted total internal reflection (GA-FTIR) scheme. In the proposed device, two single-mode waveguides are separate by graphene-$SiO_2$-graphene layers. By changing the chemical potential of the graphene layers with a gate voltage, the coupling strength between the waveguides, and hence the coupling length of the directional coupler, is controlled. Therefore, for a properly chosen, fixed device length, when an input wave is launched into one of the waveguides, the ratio of their output powers can be controlled electrically. The operation of the proposed device is analyzed, with the dispersion relations calculated using a model of a one-dimensional slab waveguide. The supermodes in the coupled waveguide are calculated using the finite-element method to estimate the coupling length, realistic devices are designed, and their performance was confirmed using the finite-difference time-domain method. The designed $3{\mu}m$ by $1{\mu}m$ device achieves an insertion loss of less than 0.11 dB, and a 24-dB extinction ratio between bar and cross states. The proposed low-loss device could enable integrated modulation of a strong optical signal, without thermal buildup.

• Nuclear Engineering and Technology
• /
• 제51권3호
• /
• pp.884-893
• /
• 2019

Spent fuel racks are steel structures used in the storage of the spent fuel removed from the nuclear power reactor. Rack units are submerged in the depths of the spent fuel pool to keep the fuel cool. Their free-standing design isolates their bases from the pool floor reducing structural stresses in case of seismic event. However, these singular features complicate their seismic analysis which involves a transient dynamic response with geometrical nonlinearities and fluid-structure interactions. An accurate estimation of the response is essential to achieve a safe pool layout and a reliable structural design. An analysis methodology based on the hydrodynamic mass concept and implicit integration algorithms was developed ad-hoc, but some dispersion of results still remains. In order to validate the analysis methodology, vibration tests are carried out on a reduced scale mock-up of a 2-rack system. The two rack mockups are submerged in free-standing conditions inside a rigid pool tank loaded with fake fuel assemblies and subjected to accelerations on a unidirectional shaking table. This article compares the experimental data with the numerical outputs of a finite element model built in ANSYS Mechanical. The in-phase motion of both units is highlighted and the water coupling effect is detailed. Results show a good agreement validating the methodology.

• Structural Engineering and Mechanics
• /
• 제70권1호
• /
• pp.55-66
• /
• 2019

This work deals with the size-dependent wave propagation analysis of functionally graded (FG) anisotropic nanoplates based on a nonlocal strain gradient refined plate model. The present model incorporates two scale coefficients to examine wave dispersion relations more accurately. Material properties of FG anisotropic nanoplates are exponentially varying in the z-direction. In order to solve the governing equations for bulk waves, an analytical method is performed and wave frequencies and phase velocities are obtained as a function of wave number. The influences of several important parameters such as material graduation exponent, geometry, Winkler-Pasternak foundation parameters and wave number on the wave propagation of FG anisotropic nanoplates resting on the elastic foundation are investigated and discussed in detail. It is concluded that these parameters play significant roles on the wave propagation behavior of the nanoplates. From the best knowledge of authors, it is the first time that FG nanoplate made of anisotropic materials is investigated, so, presented numerical results can serve as benchmarks for future analysis of such structures.

• 천문학회보
• /
• 제44권1호
• /
• pp.34.1-34.1
• /
• 2019

To study the formation and evolution of stellar bars and gaseous nuclear rings in barred galaxies in realistic environments, we run fully self-consistent three-dimensional simulations of isolated disk galaxies. We consider two groups of models with cold or warm disks that differ in the radial velocity dispersion. We also vary the gas fraction of the disks. We found that a bar forms earlier and more strongly as the gas fraction increases in the cold disks, while the gas delays the bar formation in the warm disks. The bar formation enhances a central mass concentration which in turn weakens the bar strength temporarily, after which the bar regrows to become stronger in a model with a smaller gas fraction in both cold and warm disks. Although all bars rotate fast in the beginning, they rapidly turn to slow rotators. Gas infalling to the central region forms a dense star-forming nuclear ring. The ring size is very small when it first forms and grows over time. The ring star formation is episodic and bursty due to star formation feedback, and has a good correlation with the mass inflow rate to the ring. Some expanding shells produced by star formation feedback are sheared out in the bar regions and collide with dust lanes to appear as filamentary interbar spurs.