• 한국음향학회지
• /
• 제23권3호
• /
• pp.197-205
• /
• 2004

천해에서 측정한 선박 방사소음의 거리-주파수 영역 스펙트로그램에 나타나는 줄무늬 패턴 기울기의 부호 변화 원인에 대한 분석 결과를 수록하였다. 모드 이론에 근거한 수치 모델을 이용하여 해저면 음향 특성을 변화시켜 가며 모의한 줄무늬 패턴과 분산 특성을 분석한 결과는 측정 신호에 나타나는 줄무늬 패턴 기울기의 부호 변화가 해저면의 전단성, 보다 구체적으로는 두께가 약 3±1m 정도일 것으로 예상되는 퇴적층의 하부에 존재하는 기반암의 전단성에서 기인한 특징임을 보여주었다.

• 대한화학회지
• /
• 제40권1호
• /
• pp.20-27
• /
• 1996

분광학적 실험 자료들로부터 안정하고 정확한 위치에너지를 역으로 얻어내는 방법에 대하여 연구하였다. 이러한 역과정 방법은 비선형 역과정 문제에서 야기되는 불안정성을 위치에너지가 유연하게 연속적이라는 제한 조건을 사용하여 최적의 해를 얻어내는 Tikhonov의 규칙화에 기초를 두고 있다. 이 방법의 장점은 특정한 형태의 위치에너지 변수를 맞추는 보통의 방법과는 달리 위치에너지를 분자간 거리의 연속함수로 다루었다. 이 방법을 실험적으로 얻은 Ar-Ar계의 분광학적 자료에 적용하여 전 구간에서 정확한 위치에너지를 찾아가는 것을 보여주었고, Morse나 RKR 방법으로 얻은 위치에너지의 부정확한 먼거리 인력 부분을 보정할 수 있음을 보여주었다.

• 한국해양공학회지
• /
• 제24권4호
• /
• pp.32-37
• /
• 2010

This study presents the attenuation characteristics of the first guided longitudinal wave mode propagating in water-filled, buried steel pipes in order to investigate the effects of soil saturation and compaction on the attenuation patterns. For numerical calculation of attenuation, 10 different combinations of S-wave velocity, P-wave velocity, and soil densities were considered. From the attenuation dispersion curves, which were obtained using Disperse software, we determined that the attenuation decreases as saturation increases, whereas it increases as compaction increases. Over the frequency range from 0.2 to 0.4 MHz, the first longitudinal wave mode has attenuations that are relatively lower than for other ranges, is faster than the first flexural wave mode, and is sensitive to defects aligned in the axial direction. Hence, the first longitudinal wave mode over the mentioned frequency range would be the proper choice for long-range buried pipelines that transport water.

• 한국환경과학회지
• /
• 제19권2호
• /
• pp.137-148
• /
• 2010

This paper investigates the characteristics of turbulence schemes. Turbulence closures are fundamental for modeling the atmospheric diffusion, transport and dispersion in the boundary layer. In particular, in non-homogeneous conditions, a proper description of turbulent transport in planetary boundary layer is fundamental aspect. This study is based on the Regional Atmospheric Modeling System (RAMS) and combines four different turbulence schemes to assess if the different schemes have a impact on simulation results of vertical profiles. Two of these schemes are Isotropc Deformation scheme (I.Def) and Anisotropic deformation scheme (A.Def) that are simple local scheme based on Smagorinsky scheme. The other two are Mellor-Yamada scheme (MY2.5) and Deardorff TKE scheme (D.TKE) that are more complex non-local schemes that include a prognostic equation for turbulence kinetic energy. The simulated potential temperature, wind speed and mixing ratio are compared against radiosonde observations from the study region. MY2.5 shows consistently reasonable vertical profile and closet to observation. D.TKE shows good results under relatively strong synoptic condition especially, mixing ratio simulation. Validation results show that all schemes consistently underestimated wind speed and mixing ratio but, potential temperature was somewhat overestimated.

• 대한기계학회논문집B
• /
• 제21권6호
• /
• pp.747-757
• /
• 1997

A numerical investigation of the fuel concentration field in a fluidized bed has been carried out for the scale-up of a fluidized bed combustor (FBC). A two-dimensional transient model is developed using the two-phase fluidization, a simple chemical reaction, and lateral solid mixing theories. The uniformity of fuel concentration distributions is controlled by the location and the number of fuel feeders, fluidizing velocities and the bed-heights. While larger bubbles owing to greater fluidizing velocities enhance the fuel-dispersion in the bed, they have adverse effects on fuel combustion and thus result in the increase of fuel concentration, since a greater bubble means a larger bypass which reduces gas-exchange rates between bubble and emulsion phases. Average or maximum values of the bed fuel concentration are utilized as criteria for the scale-up from a pilot/lab-scale to a commercial-size bed.

• 한국전산유체공학회지
• /
• 제2권1호
• /
• pp.93-108
• /
• 1997

This paper describes several computational results on the various energy and environmental problems using Patankar's SIMPLE method. The specific problems included in this study are : pollutant and flammable material dispersions in open and confined areas, buoyancy-driven flow in a lake, primary clarifier for water and waste water treatment, hood ventilation in workplace. cyclone combustor and Dow chlorination reactor. A control-volume based finite-difference method is employed together with the power-law scheme. The pressure-velocity coupling is resolved by the use of the revised version of SIMPLE, says SIMPLER and SIMPLEC. The Reynolds stresses are closed using the standard or RNG κ-ε models. A nonequilibrium turbulent reaction model is developed for the application of the chlorination process in the Dow thermal reactor. Other important empirical models and physical insights appeared in this study are presented and discussed in a brief note. The computational method developed in this study is considered, in general, as a viable tool for the design and determination of the optimal operating condition of various environmental engineering system of interest.

• 한국인터넷방송통신학회논문지
• /
• 제20권2호
• /
• pp.195-200
• /
• 2020

고유치 문제에 기초한 모드 전송선로 이론 (Modal Transmission-Line Theory: MTLT)을 이용하여 blazed 격자로 구성된 광 도파로의 누설특성과 Bragg 조건들을 정확하게 분석하였다. 대칭형, 톱니형, 비대칭형으로 분류한 blazed 격자형 광 도파로는 Bragg 조건들에서 leaky-wave stop-band가 나타났으며, Bragg 조건 근처에서 Rayleigh 조건에 기인한 anomalies 현상이 발생함을 보였다. 또한, 주기적인 격자구조의 특성 임피던스에 기초한 종 방향 등가 전송선로를 구성하여 광 도파로의 DFB 특성을 Bragg 조건에서 분석하였다. 분석 결과, leaky-wave stop-band가 발생하는 Bragg 조건에서 DFB 도파로의 반사전력이 최대가 되는 것을 확인하였다.

• Nuclear Engineering and Technology
• /
• 제47권2호
• /
• pp.196-203
• /
• 2015

The aim of this work is to demonstrate a method for exciting and receiving torsional and longitudinal mode guided waves with an electromagnetic acoustic transducer (EMAT) ring array. First of all, a three-dimensional guided wave simulator is developed in order to numerically analyze the propagation of the guided wave. The finite difference time domain method is used for the simulator. Second, two guided wave testing systems using an EMAT ring array are provided: one is for torsional mode (T-mode) guided wave and the other is for longitudinal mode (L-mode). The EMATs used in the both systems are the same in design. A method to generate and receive the T- and L-mode guided waves with the same EMAT is proposed. Finally, experimental and numerical results are compared and discussed. The results of experiments and simulation agree well, showing the potential of the EMAT ring array as a mode controllable guided wave transmitter and receiver.

• 한국소음진동공학회논문집
• /
• 제21권5호
• /
• pp.437-446
• /
• 2011

Performance of array sonars towed underwater is limited due to the self-noise induced mainly by the strumming vibration of the towing cable and also turbulent flow around the acoustic sensor module. The vibration of the towing cable generates axisymmetric waves that propagate along the acoustic module of the array sonar and produce self-noise. The present study aims to investigate the characteristics of the self-noise induced by the axisymmetric vibrations of the acoustic module. The waves of interest are the bulge and extensional waves propagating along the fluid-filled elastic hose. Dispersion relations of these waves are predicted by means of the numerical simulation to evaluate the wave speeds. The self-noise induced by the axisymmetric waves are formulated taking into account the damping of the elastic hose and the effect of the damping is investigated.

• 한국전자파학회논문지
• /
• 제12권5호
• /
• pp.795-801
• /
• 2001

본 논문은 브랜치 선로 결합기를 소형화하는 방법에 대해 기술하였다. 이 방법은 덮개층이 있는 선로를 이용한 방법이다. 덮개층이 있는 선로의 주파수 변화에 따른 특성(분산 및 특성임피던스)을 해석하기 위해 스펙트럴 영역에서의 Immittance 방법과 선분할법(Method of Line)을 이용하였다. 덮개층이 있는 선로에 관한 스펙트럴 영역에서의 Green 함수를 구하고 이를 이용하여 수치적인 결과를 얻었다. 이 결과를 이용하여 덮개층을 갖는 브랜치 선로 하이브리드를 중심주파수 2 GHz에서 설계하고 제작하였다. 실험 결과 유전율 10.2dls 덮개층을 갖는 경우 기존 단일 마이크로스트립 선로로 구현된 결합기보다 31.4% 크기가 줄어들었음을 확인할 수 있었다. 이 방법은 앞으로 이동통신 빔형성 안테나의 급전선인 Butler Matrix의 크기를 줄이는 방법으로 사용 가능하리라 사료된다.