• 제목/요약/키워드: Number of passing vessels

검색결과 7건 처리시간 0.019초

여수·광양항 출입항로 통항 특성 (Characteristics of Ship's Traffic Route in Yeosu·Gwangyang Port)

  • 김대진
    • 수산해양교육연구
    • /
    • 제28권2호
    • /
    • pp.539-549
    • /
    • 2016
  • This study analyzed ship's passing characteristics in relation with incoming and outgoing routes in Yeosu Gwangyang Port, and examined the risk factors and measures for safety management of marine traffic. The number of passing ships in Yeosu Gwangyang Port was about 60,000 ships annually based on 2014, and the tonnage rose 73% from 447,000 thousand tons in 2005 to 770,000 thousand tons in 2014. Actually, the number of large passing ships was revealed to enormously increase. As a result of marine traffic survey in Yeosu Gwangyang Port for three days in August 2015, daily average passing ships were 408 ships, and 77% of the total passing ships passed between 04:00 and 20:00. The chemical ships and general cargo ships took up the most at 58% of the total incoming and outgoing ships, followed by other work ships at 21%, tankers at 8%, fishing vessels at 7.5% and container ships at 5.5%. Concerning the size of passing ships, ships less than 1,000 tons accounted for 58.6% of the total passing ships. Ships of 1,000-5,000 tons were 20.1%, and those of 5,000-10,000 tons were 6.8%, and more than 10,000 tons were 14.4%. Especially, ships of 500 tons and less using mainly coastal passing routes took up 49% of the total passing ships. As for ship's passage ratio by route, Nakpo sea area where many routes meet accounted for 27.2%, specified area 49%, costal route 8%, specified area's incoming and outgoing sea area around Daedo 4.5%, and Dolsan coastal ara and Kumhodo sea area 8.5%. The number of ships standing by for anchoring in the six designated anchorages was 230 for three days. The standby rate for anchoring was 25% based on the specified area passing ships. In Nakpo sea area, where many routes meet, parallel passing and cross passing between ships occurred the most frequently. In the specified area, many cases, in which incoming and outgoing cargo ships at the starting and ending parts and incoming and outgoing work ships and fishing vessels at the coastal routes cross, took place. Consequently, the following measures are urgently needed: active passing management in the Nakpo sea area, where passing routes are complex, specified areas and costal traffic routes, the elimination of rocks in the route close to Myodo, an effort to improve routes including shallow depth area dredging, and rational safety management for small work ships frequently incoming and outgoing the passing routes of large ships, and fishing vessels operated in the sea areas around those passing routes.

여수광양항 해상교통량의 장기변동 및 통항 특성 (Analysis of Long-Term Variation in Marine Traffic Volume and Characteristics of Ship Traffic Routes in Yeosu Gwangyang Port)

  • 김대진;신형호;장덕종
    • 해양환경안전학회지
    • /
    • 제26권1호
    • /
    • pp.31-38
    • /
    • 2020
  • 지난 22년 동안의 선박 통항자료와 2015년부터 2017년까지 3년 동안 매년 72시간씩 실시간 선박 통항량 조사를 통해 여수광양항의 해상교통량의 장기변동과 출입항로에 대한 통항특성을 분석하였다. 2017년도 기준으로, 여수광양항의 선박 통항척수는 약 66,000척이며, 선복량은 약 804,564천톤으로 1996년도 189,906천톤에 비해 400 % 이상 증가하였고 위험화물 물동량은 140,000천톤으로 1996년에 비해 250 % 이상 증가한 것으로 나타났다. 실시간 선박 통항량 조사결과, 1일 평균 통항 선박은 357척이며 통항로 이용율은 낙포해역이 28.1 %, 특정해역이 43.8 %, 연안통항로와 돌산연안 및 금오도 수역이 6.8 %로 동일하였다. 다수의 항로가 만나는 낙포해역은 선박간의 병항 및 교차항행이 가장 빈번했으며, 특정해역도 주변의 연안통항로에서 소형 작업선들이 다수 진출입하여 대형 선박과 교차되는 경우가 자주 발생하였다. 화물선박의 묘박지 투묘 대기율은 약 24 % 정도였으며, 케미컬선, 유조선 등의 위험화물 선박의 야간 통항율은 약 20 %에 달하였다. 여수광양항의 선박 통항량은 매년 증가하지만 선박 통항로는 과거와 큰 차이가 없기에 사고의 위험이 상존한다고 볼 수 있다. 따라서 다수의 항로가 중첩되어 통항 선박간의 사고 위험이 높은 제1항로 ~ 제4항로의 준설 및 항로 확장, 항로 부근 암초 제거, 항로표지 보강 등 항로 여건을 우선적으로 개선할 필요가 있다. 또한 위험성이 높은 항만의 진출입 시간과 위험화물 선박의 통항시간을 일부 제한할 수 있도록 항행규칙을 개정할 필요가 있으며, 연안통항로를 이용하는 소형 선박들의 통항관리를 적극적으로 시행할 수 있도록 VTS체계의 고도화가 요구된다.

Evaluation of the Microvascular Research Center Training Program for Assessing Microsurgical Skills in Trainee Surgeons

  • Komatsu, Seiji;Yamada, Kiyoshi;Yamashita, Shuji;Sugiyama, Narushi;Tokuyama, Eijiro;Matsumoto, Kumiko;Takara, Ayumi;Kimata, Yoshihiro
    • Archives of Plastic Surgery
    • /
    • 제40권3호
    • /
    • pp.214-219
    • /
    • 2013
  • Background We established the Microvascular Research Center Training Program (MRCP) to help trainee surgeons acquire and develop microsurgical skills. Medical students were recruited to undergo the MRCP to assess the effectiveness of the MRCP for trainee surgeons. Methods Twenty-two medical students with no prior microsurgical experience, who completed the course from 2005 to 2012, were included. The MRCP comprises 5 stages of training, each with specific passing requirements. Stages 1 and 2 involve anastomosing silicone tubes and blood vessels of chicken carcasses, respectively, within 20 minutes. Stage 3 involves anastomosing the femoral artery and vein of live rats with a 1-day patency rate of >80%. Stage 4 requires replantation of free superficial inferior epigastric artery flaps in rats with a 7-day success rate of >80%. Stage 5 involves successful completion of one case of rat replantation/transplantation. We calculated the passing rate for each stage and recorded the number of anastomoses required to pass stages 3 and 4. Results The passing rates were 100% (22/22) for stages 1 and 2, 86.4% (19/22) for stage 3, 59.1% (13/22) for stage 4, and 55.0% (11/20) for stage 5. The number of anastomoses performed was $17.2{\pm}12.2$ in stage 3 and $11.3{\pm}8.1$ in stage 4. Conclusions Majority of the medical students who undertook the MRCP acquired basic microsurgical skills. Thus, we conclude that the MRCP is an effective microsurgery training program for trainee surgeons.

통항량 기반의 국가어항 방파제등대 서비스수준 추정 연구 (A Study on the Estimation of Service Level for National Fishing Harbour Breakwater Lighthouse Based on the Traffic Volume)

  • 문범식;송재욱;강정구;김태균
    • 한국항해항만학회지
    • /
    • 제45권6호
    • /
    • pp.306-313
    • /
    • 2021
  • 국가어항은 어선의 피항지로 운영되고 있고, 항구의 식별 및 통항선박의 안전 등을 고려하여 기능시설인 방파제등대가 설치되어 있다. 본 연구에서는 전국 105개 국가어항의 통항량을 기반으로 방파제등대(234기) 서비스수준을 추정하였다. 이를 위해 평가항목의 결정, 기준지수 산정(Fs=1), 근접항 식별, 방파제등대의 기능(서비스수준) 추정 순으로 진행하였다. 하지만 국가어항은 어항의 규모, 통항량, 어선 수용능력 등이 상이하였다. 따라서 105개의 국가어항은 군집분석을 통해 3개의 그룹으로 나누었다. 군집분석은 방파제등대의 서비스수준 요소인 제적어선 척수, 어선톤수, 연간 입출항척수, 어선 수용능력 등을 기준으로 하였다. 추정결과 방파제등대의 서비스수준(등탑의 높이, 등고, 광달거리, 등고)은 그룹1이 10.50m, 16.50m, 7.00mile, 5.5sec이고, 그룹2가 10.67m, 16.16m, 8.33mile, 6.0sec이며, 그룹3이 11.53m, 16.75m, 6.75mile, 5.0sec이다. 이러한 연구결과는 차후 어항에 방파제등대를 신설할 경우 통항선박의 서비스수준 향상을 위한 기초자료로 활용될 수 있을 것이다.

정치망뜸과 부표형 코우너 리프렉터의 레이다 최대심지거이에 대한 연구 (A Study on the Radar Maximum Detectable Range of the Floats of Set-nets and the Floating Corner Reflector)

  • 신형일
    • 한국항해학회지
    • /
    • 제1권1호
    • /
    • pp.17-26
    • /
    • 1977
  • A large number of the set-nets are set in Namhaedo coast of Korea. The floats of these set-nets are not only small even in case of large floats but also they scarcely have distinguishable marks such as light buoys or flags, so that they are very hard to be recognized by naked eyes and thus became probable obstacles to navigation for the passing ships and the fishing vessels. In order to research the capability of detecting such nets with Radar, the author investigated a maximum detectable range of the ordinarly large floatsand of a floating corner reflectors of various size and shape by Radar. The results obtained are as follows; 1. A maximum detectable range of large floats at a close range can be calculated by the Radar equation in sufficient accuracy. 2. Large floats of the large set-nets are also detectable by Radar even though it's detectable range boundary was within 0.2-0.65 miles. And the Radar picture of large floats was easier to be found with somewhat higher setting of the gain control on shorter range scale of the 1 mile. 3. Floating corner reflector rather suitable for set-net floats of "S" type reflector proposed in this paper, of which the dimension must be above 17cm in diameter to be detectable by Radar at 2 miles.t 2 miles.

  • PDF

빙산과의 충돌 시 충격 하중이 극지운항선박의 내빙 구조에 미치는 영향에 관한 연구 (A Study on the Effect of Ice Impact Forces on an Ice-Strengthened Polar Class Ship After a Collision with an Iceberg)

  • 김성혁;;석초;이창현
    • 해양환경안전학회지
    • /
    • 제23권1호
    • /
    • pp.40-46
    • /
    • 2017
  • 본 연구는 LS-DYNA 971 을 이용하여 내빙 구조 선박과 빙산 모형 간의 충돌 시험을 수행 후 북극해 운항 선박의 내빙 능력을 분석하였다. 국제선급연합회(IACS)의 Unified Requirements for Polar ship(URI) 규정을 바탕으로 FEM 선박 모형에 내빙 구조를 적용하였으며, 빙산 모형에는 Elastic-perfect plastic 물성과 Tsai-Wu 항복 곡면을 적용하였다. 또한 실험 결과 비교를 위하여 내빙 구조를 갖추지 않은 일반선박 모형과의 충돌 시험도 수행하였다. 실험 결과 일반 구조 선박의 구형 선수에 빙산 모형에 의해 움푹 들어간 약 1.8 미터 깊이의 선체 손상이 발생하였으나, 내빙 구조 선박의 충돌에서는 약 1.0 미터 깊이의 선체 손상만이 발생하였다. 또한 일반 구조 선박과 충돌한 빙산모형은 원형의 상태를 거의 유지한 반면, 내빙 구조 선박과 충돌한 빙산 모형은 내빙 구조의 구형 선수에 의해 빙산이 일부 파괴되는 현상이 발견되었다.

AIS 데이터 전처리 프로그램의 개발 및 Vung Tau 해역에의 적용 - IWRAP Mk2 프로그램을 기초로 - (Developing a Program to Pre-process AIS Data and applying to Vung Tau Waterway in Vietnam - Based on the IWRAP Mk2 program -)

  • ;박영수;박진수;정재용
    • 해양환경안전학회지
    • /
    • 제19권4호
    • /
    • pp.345-351
    • /
    • 2013
  • IWRAP 프로그램은 수로에서의 위험성을 평가하는데 유용한 프로그램이다. 그러나 이 프로그램의 기본 버전의 경우 AIS 데이터를 수집하는 기능이 포함되지 않아서, 더구나 베트남과 같은 개발도상국에서는 해상교통량 통계 데이터가 없는 실정이다. 사용자들은 수동으로 준비하여 입력하여야 한다. 이 연구는 IWRAP Mk2 프로그램 기본 버전을 사용하는데 있어 AIS 데이터를 전처리(pre-process) 할 수 있는 프로그램을 개발하고자 하였으며, 선박 형태, 선박 크기, 통과 시간 등으로 분류한 통항로에서의 선박 통항 척수 및 항로 배치와 같이 해역 내 해상교통에 관한 정보들을 사용자에게 제공하도록 고안되었다. 이렇게 개발된 통합 AIS 프로그램(Total AIS, TOAIS)은 베트남 Vung Tau 해역의 AIS 수집 데이터를 전처리할 수 있는지에 대하여 검증하였다. 그 결과, 통합 AIS 프로그램에서 전처리한 데이터를 이용한 IWRAP 프로그램은 베트남 해역의 위험성을 효율적으로 평가할 수 있었다.