• 한국도서관정보학회지
• /
• 제6권
• /
• pp.27-52
• /
• 1979

The book number, among various steps of book processing works, needs more careful attention and better-organized knowledge, and it is more sensitive than other parts of cataloging. This paper will give some suggestions on ways of constructing a book number, including the definition and the types of edition indication within a book number, and analyse some problems related to their application into real situation. Three possible ways of edition indication with in a book number were explained, and examples were given for each of them. Problems occurring when these codes were applied to books were analysed. In addition to the generally recognized meaning of the book number as a mean of differentiating similar works, the edition indication can make it possible for both the library staffs and the users to identify the characteristics of a work only with the book number. Searches for mere convenient and effective ways of edition indication might be related to the cost-effectiveness of book processing, and of library operation.

• 대한교통학회지
• /
• 제22권7호
• /
• pp.41-48
• /
• 2004

교통 혼잡 증가와 사고 발생, 환경오염 등의 문제 해결 방안으로 대중교통으로의 수요 유도를 고려할 수 있다. 하지만 도시철도는 대중교통의 또 다른 수단인 버스와 비교하여 볼 때 정시성 및 대량수송 등의 장점을 갖고있음에도 불구하고 막대한 초기투자비용과 부채의 상환 등으로 인한 적자 상태는 도시철도 서비스의 질을 향상시키기 위하여 해결해야 할 과제로 남아있다. 비용함수의 작성은 효율성 있는 사업의 운영을 위한 한 방법으로, 사업의 운영상태를 파악하고 해결점을 모색할 수 있는 수단이 된다. 열차운행비용함수는 수송인원, 수송수입 등과 같이 열차운행으로 인해 산출된 결과(실적변수)와 열차 운행에 투입된 총비용간의 관계를 함수로 표현한 것으로, 함수 작성을 통해 도시철도 산업의 비용구조 뿐만 아니라, 도시철도 서비스로 인한 실적과 소요된 총비용간의 관계를 파악할 수 있게 된다. 본 연구에서는 그 동안 체계적인 접근이 이루어지지 알았던 서울, 인천, 부산, 대구의 도시철도 운행비용함수를 정립하여 각 기관의 운행비용의 단위비용을 파악하고 규모의 경제 존재 여부를 확인하였다. 총비용발생에 영향을 미치는 실적변수로는 수송인원과 노선-km, 열차-km, 그리고 전체수입을 고려하였다. 각 기관의 운행비용함수를 정립하여 단위비용을 산출한 결과 수송인원 및 전체수입의 단위비용은 서울지하철공사가, 노선-km 및 열차-천km는 서울도시철도공사가 가장 낮은 것으로 나타났으며, 각 기관 모두에서 열차-천km에 대한 규모의 경제가 존재하는 것으로 나타났다.

• 대한임베디드공학회논문지
• /
• 제9권5호
• /
• pp.285-292
• /
• 2014

The commonly used Newton-Raphson's floating-point number divider algorithm performs two multiplications in one iteration. In this paper, a tentative K'th Newton-Raphson's floating-point number divider algorithm which performs K times multiplications in one iteration is proposed. Since the number of multiplications performed by the proposed algorithm is dependent on the input values, the average number of multiplications per an operation in single precision and double precision divider is derived from many reciprocal tables with varying sizes. In addition, an error correction algorithm, which consists of one multiplication and a decision, to get exact result in divider is proposed. Since the proposed algorithm only performs the multiplications until the error gets smaller than a given value, it can be used to improve the performance of a floating point number divider unit. Also, it can be used to construct optimized approximate reciprocal tables.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2002년도 추계공동학술대회논문집
• /
• pp.63-70
• /
• 2002

중심(Hub)항만이 피기 위한 주요과제는 자동화이다. 선진항만은 이미 자동화 컨테이너터미널을 실용화하고 있는 단계이고, 국내의 경우는 자동화 컨테이너터미널을 구축하기 위한 기본계획 및 실시설계가 되고 있는 실정이다. 자동화 컨테이너터미널의 핵심은 자동화 장비인 ATC(Automated Transfer Crane)와 AGV(Automated Guided Vehicle)의 효율적인 운영이다. 자동화 장비의 효율적인 운영은 자동화 컨테이너터미널의 생산성을 결정짓는 가장 중요한 요소이다. 본 논문에서는 자동화 컨테이너터미널에 효율적인 3가지의 An 운영규칙과 AGV 배정규칙을 사용하여 자동화 컨테이너터미널에서 컨테이너 선적시간을 최소로 할 수 있는 가장 적합한 장비운영규칙을 제안하고자 한다. 자동화 컨테이너터미널에서 자동화 장비 운영에는 예기치 않은 교착이나 간섭이 발생하므로, 장비운영에 관한 계획은 이벤트 중심으로 실시간으로 이루어져야 한다. 그래서 본 논문에서는 실시간 계획에 가장 적합한 An 운영규칙과 AGV 배정규칙을 제안하고, 이들 규칙들의 수행도를 평가하기 위해 실제 자동화 컨테이너터미널에서 생길 수 있는 다양한 환경들에서 시뮬레이션 한다. 이 시뮬레이션을 통해 다양한 파라미터-야드의 리마샬링(re-marshaling)정도, 컨테이너 처리 개수, 운영 AGV 대수-에서 가장 로버스터(robust)한 자동화 장비의 통합운영규칙을 제시한다.

• 전력전자학회논문지
• /
• 제18권3호
• /
• pp.256-262
• /
• 2013

In the large system such DC distribution for building, the method that a number of modules converters operation in parallel is commonly used. When parallel operation, circulating current is directly related to the loss of the entire system. Accordingly, each module to share the same current is the most important for the safety of the power system. In this paper, control method for reducing circulating current in parallel operation is proposed. furthermore response and operation of steady-state with parallel system was verified by simulation and experiment results.

• 전기학회논문지
• /
• 제59권2호
• /
• pp.338-343
• /
• 2010

Low cost motor drives are being sought for high volume energy efficient home appliances. Key to the realization of such low cost motor drives is to reduce the power electronic converter in terms of its components, particularly the active devices, finding the motor with least complexity for manufacturing and a controller that could extract the desired performance from the machine and converter combination. These and other factors such as self-starting, speed control over a wide range and most of all the crowning aspect of a four quadrant operation with bare minimum number of controllable switch (or switches) remain as formidable challenges for low cost motor drive realization. In this paper, a four quadrant switched reluctance motor (SRM) drive with only one controllable switch is realized by using a two-phase machine. The theory and operation of the proposed four-quadrant SRM drive with the proposed control algorithm for its realization are described. The motor drive is modeled, simulated and analyzed to verify its feasibility for self-starting, speed control and for four quadrant operation and the simulation results are presented. Experimental results confirm the validity of the proposed control algorithm for four quadrant control of the SRM drive. The focus of the paper is mainly directed toward the control algorithm for realizing the four-quadrant operation of the two-phase SRM drive with a single controllable switch converter.

• 한국안전학회지
• /
• 제38권1호
• /
• pp.87-92
• /
• 2023

The number of unmanned light rail train operators is continuously increasing in Korea. In a failure event during an operation due to the nature of the unmanned operation, recovery is performed based on the remote control. However, if remote recovery is not feasible, safety personnel arrive at the train to resume the train operation. There are regulations on safety personnel and the suspension time of the train operation. However, there is currently no rule for safety personnel deployment. Currently, railway operating organizations operate in three scenarios: safety personnel on board trains, stationed at stations, and deployed at major stations. Four major factors influence the downtime for each emergency response scenario. However, these four influencing factors vary too much to predict results with simple calculations. In this study, four influencing factors were considered as random variables with high uncertainty. In addition, the Monte Carlo method was applied to each scenario for the safety personnel deployment to predict train service downtime. This study found a 17% difference in train service suspension by safety personnel deployment scenario. The results of this study can be used in setting service goals, such as standards for future safety personnel placement and frequency of service interruptions.

• 한국멀티미디어학회논문지
• /
• 제23권9호
• /
• pp.1171-1180
• /
• 2020

The number of the PV systems installed in south korea has been gradually increasing. Interest of operation & management of PV System is rising up as PV System installation trends to increase. The vital function of operation & management is the monitoring system. Most monitoring systems are only available for equipment of suppliers and manufacturers. In this study, a monitoring system was implemented to support multi-domain equipment (inverter, junction box, water distribution board, environmental sensors) that are not limited to specific manufacturers. Monitoring system includes a visualization function, which makes it easy for users to check the power generation and the operation status of the equipment of PV System. In the future, this monitoring system will be utilized as an operation & maintenance foundation element in the PV system industry.

• 한국항해항만학회지
• /
• 제28권8호
• /
• pp.721-726
• /
• 2004

본 연구에서는 장치장 운영규칙의 현실성을 높이기 위해서 트랜스퍼 크레인의 작업운영체계를 분석하고 작업우선순위의 적용을 위한 운영규칙의 적용방법을 설명하였다. 또한 장치장에서 주행로의 특성에 따른 트럭의 대기 및 주행로 점거형태를 분석하여 블록에 진입하여 대기할 수 있는 최대 대기차량수를 도출할 수 있는 산정식을 정리하고 공간의 제약상태를 분석하였다. 또한 공간의 제약사항 극복하기 위해서 공간자원을 정의할 수 있는 다작업원칙을 제시하고 그 원칙을 위한 해법과 순서도를 묘사하였다.

• International Journal of Precision Engineering and Manufacturing
• /
• 제4권6호
• /
• pp.5-11
• /
• 2003

The number of the enterprises which utilize network technology has been increasing for solving problems such as productivity improvement, market trend analysis, and material collection for making decision. Especially, the management of equipment and the recovery time reduction when machines break down are very important factors in productivity improvement of the enterprise. Currently, most of the remote trouble diagnosis of equipment using the internet have just one function of transmitting the trouble information to the user. Therefore it does not directly reflect the user's recovery experience or the developer's new recovery methods. If the user's experienced recovery methods or the developer's recovery methods as well as the basic recovery methods are reflected online or on the internet, it makes it possible to recover faster than before. In this paper, we develop a Remote Monitoring Server (RMS) for chip mounters, and make it possible to reduce the recovery time by reflecting the user's experience and developer's new methods in addition to presenting the basic recovery methods. For this, trouble recovery concept will be defined. Based on this, many functions(trouble diagnosis, the presentation of the basic recovery methods, user's and developer's recovery method, counting function of the trouble number of each code, and presentation of usage number of each recovery methods) were developed. By utilizing the reports of the actual results of chip mounter and the notice function of the parts change time, the rate of operation of the chip mounter can be improved.