• Economic and Environmental Geology
• /
• v.36 no.6
• /
• pp.537-543
• /
• 2003

As pyrite is commonly associated with arsenopyrite, the use of pyrite including arsenopyrite for medicine requires close attention on arsenic toxicity. The toxicity was reduced by traditional processing operations include heating and quenching in vinegar. To verify the scientific effects of this process, pyrite containing many crystals of arsenopyrite was processed at temperatures from 45$0^{\circ}C$ to 85$0^{\circ}C$ and through as many as 5 processing cycles. Arsenopyrite completely disappeared when processed only once at $650^{\circ}C$ while it remained even after 5 processing cycles at 45$0^{\circ}C$. Arsenic was most abundant in medicinal mineral samples processed at 45$0^{\circ}C$ and sharply decreased when processed at $650^{\circ}C$ or 85$0^{\circ}C$ And arsenic extraction test in water was carried out from the processed pyrite medicine on the assumption that pyrite medicines with the lowest As metal content would be most desirable. Arsenic were most abundant in water extracted from medicinal mineral samples processed at 45$0^{\circ}C$ and sharply decreased when processed at $650^{\circ}C$ or 85$0^{\circ}C$. But the extracted As concentrations in water exceeded drinking water standards even when processed at 85$0^{\circ}C$. Increasing temperature promoted elimination of arsenopyrite and reduction of As in medicinal minerals and the extraction solutions. But the effects of processing cycles at the same processing temperature were not clear. Heating temperature is more important than number of processing cycles for the removal of arsenic, and it is necessary to heat pyrite to over $650^{\circ}C$ to remove it.

• Clinical and Experimental Reproductive Medicine
• /
• v.37 no.2
• /
• pp.153-158
• /
• 2010

Objective: To compare the clinical outcomes between oral micronized progesterone and dydrogesterone as a luteal phase support in stimulated intrauterine insemination (IUI) cycles. Methods: A retrospective analysis was performed in 183 IUI cycles during January 2007 to August 2009. Superovulation was achieved by using gonadotropins combined with or without clomiphene citrate. The luteal phase was supported by oral micronized progesterone 300 mg/day (n=136 cycles) or dydrogesterone 20 mg/day (n=47 cycles) from day of insemination. Results: There were no significant differences in clinical characteristics such as age of female, infertility factors, number of mature follicles ($\geq$16 mm), total motile sperm counts, and endometrial thickness on triggering day between the two groups. The clinical pregnancy rates per cycle were similar between the two groups (21.3% in the micronized progesterone group vs. 19.1% in the dydrogesterone group, p=0.92). The clinical miscarriage rate tended to be 3-fold higher in the micronized progesterone group (34.5% vs. 11.1%, p=0.36). Conclusion: Supplementation of oral dydrogesterone as a luteal support has similar clinical outcomes compared with oral micronized progesterone. Large-scaled randomized study would be required to confirm our findings.

• Nuclear Engineering and Technology
• /
• v.42 no.6
• /
• pp.662-669
• /
• 2010

To develop the manufacturing methods for the blanket first wall (FW) of the International Thermonuclear Experimental Reactor (ITER) and to verify the integrity of the joint, Be/Cu mockups were fabricated and tested at the KoHLT-1 (Korea Heat Load Test facility), a graphite heater facility located at the Korea Atomic Energy Research Institute (KAERI). Since Be and Cu joining is the focus of the present study, the fabricated mockups had a CuCrZr heat sink joined with three Be tiles as an armor material, unlike the original ITER blanket FW, which has a stainless steel structure and coolant tubes. Hot isostatic pressing (HIP) was carried out at $580^{\circ}C$ and 100 MPa for 2 hours as the method for Be/Cu joining. Three interlayers, namely, $1{\mu}mCr/10{\mu}mCu$, $1{\mu}mTi/0.5{\mu}mCr/10{\mu}mCu$, and $5{\mu}mTi/10{\mu}mCu$ were applied as a coating to the Be tiles by a physical vapor deposition (PVD) method. A shear test was performed with the specimens, which were fabricated by the same methods as those used to fabricate the mockups. The average values were 125 MPa to 180 MPa, and the samples with the $1{\mu}mCr/10{\mu}mCu$ interlayer showed the lowest value. No defect or delamination was found in the joints of the mockups by the developed ultrasonic test using a flat-type probe with a 10 MHz frequency and a 0.25 inch diameter. High heat flux (HHF) tests were performed at $1.0\;MW/m^2$ heat flux for each mockup using the given conditions, and the results were analyzed by ANSYS-CFX code. For the test criteria, an expected fatigue lifetime about 1,000 cycles was obtained by analysis with ANSYS-mechanical code. Mockups using the interlayers of $1{\mu}mTi/0.5{\mu}mCr/10{\mu}mCu$ and $5{\mu}mTi/10{\mu}mCu$ survived up to 1,100 cycles over the required number of cycles. However, one of the Be tiles in the other two mockups using the $1{\mu}mCr/10{\mu}mCu$ interlayer was detached during the screening test, and others were detached by discharge after 862 cycles. The integrity of the joints using the proposed interlayers was proven by the HHF test, but the other interlayer requires more study before it can be used for the joining of Be to Cu. Moreover, it was confirmed that the measured temperatures agreed well with the analysis temperatures, which were used to estimate the lifetime and that the developed facility showed its capability of the long time operation.

• Asian-Australasian Journal of Animal Sciences
• /
• v.9 no.3
• /
• pp.267-270
• /
• 1996

Experiments were conducted to study the effects of a dark (06:00-12:00), light (12:00-18:00), dark (18:00-24:00), and light (00:00-06:00) cycle on the ruminating behavior of five fasting female goats. Rumination time and number of boli were not different in the dark and light periods of the fed state or in the second and third days of fasting. Ruminating time and number of boli increased in the dark (06:00-12:00) period compared to the light (12:00-18:00) period during the first day of fasting. Ruminating time was higher after the first day of fasting than the fed state, and decreased substantially after the first day of fasting than the fed state, and decreased substantially after the second and third days of fasting compared to the fed state or the first day of fasting. Number of boli/day was not different among the fed state, the second and third days of fasting but was higher after the first day fasting compared to the fed state.

• Journal of information and communication convergence engineering
• /
• v.12 no.3
• /
• pp.181-185
• /
• 2014

The lifetime of a solid-state drive (SSD) is limited because of the number of program and erase cycles allowed on its NAND flash blocks. Data cannot be overwritten in an SSD, leading to an out-of-place update every time the data are modified. This result in two copies of the data: the original copy and a modified copy. This phenomenon is known as write amplification and adversely affects the endurance of the memory. In this study, we address the issue of reducing wear leveling through efficient handling of write requests. This results in even wearing of all the blocks, thereby increasing the endurance period. The focus of our work is to logically divert the write requests, which are concentrated to limited blocks, to the less-worn blocks and then measure the maximum number of write requests that the memory can handle. A memory without the proposed algorithm wears out prematurely as compared to that with the algorithm. The main feature of the proposed algorithm is to delay out-of-place updates till the threshold is reached, which results in a low overhead. Further, the algorithm increases endurance by a factor of the threshold level multiplied by the number of blocks in the memory.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.34S no.1
• /
• pp.124-131
• /
• 1997

There have been many demands for th ereal-time image compression. The image compression systems have a wide range of applications. However, real-time encoding is hard to implement because it needs a large amount of computations. In particular, the discrete cosine transform (DCT) and motion estimatio require a large number of arithmetic oeprations compared to other algorithms in MPEG-2. The conventional fasdt DCT algorithms have focused on the reduction of the number of additions more cycles and more expense in realization. Because TMS320C80 has special structure, new approach for implementation of DCT is suggested. The selection of adaptive algorithm and optimization is requried TMS320C80 are analyzed an dsome adaptive DCT algorithms are selected. The DCT algorithms are optimized and implemented. Chens and lees DCT algorithms among various fast algorithms are selected because 1-D approach is effective in the view of th einternal structure of TMS320C80. According to the simulation result, Lees algorithm is more effective in speed and has little difference in precision. On the basis of the result, the possibility of DCT implementation for real-time MPEG-2 system is verified and the required number of the processor, called advanced DSP, is decided for real-time MPEG-2 encoding and decoding.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.11a
• /
• pp.97-102
• /
• 1996

A methodology for estimating the number of failed fuel rods bused on the primary coolant activity in operating PWRs has been developed. This method deals with both the diffusion and the kinetic models. In case of small or medium cladding failures, the diffusion model which can consider different sizes of failure is used, whereas for large cladding failures the kinetic model is used. From the kinetic model, the release-to-birth rate ratio (R/B) is represented as a linear function of the number of failed fuel rods. This has been done by expressing the escape rate coefficient in terms of the slope of log(R/B) versus $log\;{\lambda}$. The present method has been applied to the cases of 26 cycles of several nuclear power plants for which ultrasonic testings were performed. The results show that the present method gives better predictions than the existing computer codes such as IODYNE and CADE.

• Transactions of Materials Processing
• /
• v.33 no.5
• /
• pp.330-340
• /
• 2024

The martensitic Ni-Ti shape memory alloys(SMA) can achieve a two-way shape memory effect (TWSME) through thermomechanical training/cycling. In this study, the surface of Ni-Ti SMA sheets was treated by depositing a certain number of titanium (Ti) powder layers using a selective laser meling (SLM) process to enhance TWSME. The results showed that a unique TWSME of approximately 12% with good stability was achieved after 100 training cycles when the optimum number of five Ti layers was deposited. A larger HAZ and lower cooling rate pushed more Ti particles into the grains rather than the grain boundaries, providing more time for Ti to react with NiTi to form Ti-rich intergranular Ti2Ni(Ox) precipitates. This resulted in further hindering of dislocation movement within the grains and the generation of internal stress fields required for attaining a larger TWSME. With an increase in the number of Ti-deposited layers, there was no noticeable reduction in the one-way shape memory effect (OWSME) through the initial cycling. This was due to the high residual tensile stress caused by the lower thermal expansion of the Ti layer compared to the Ni-Ti sheet.

• Proceedings of the IEEK Conference
• /
• 2001.06b
• /
• pp.365-368
• /
• 2001

This paper described a design and implementation of the division/square-root for a redundant floating point binary number using high-speed quotient selector. This division/square-root used the method of a redundant binary addition with 25MHz clock speed. The addition of two numbers can be performed in a constant time independent of the word length since carry propagation can be eliminated. We have developed a 16-bit VLSI circuit for division and square-root operations used extensively in each iterative step. It peformed the division and square-root by a redundant binary addition to the shifted binary number every 16 cycles. Also the circuit uses the nonrestoring method to obtain a quotient. The quotient selection logic used a leading three digits of partial remainders in order to be implemented in a simple circuit. As a result, the performance of the proposed scheme is further enhanced in the speed of operation process by applying new quotient selection addition logic which can be parallelly process the quotient decision field. It showed the speed-up of 13% faster than previously presented schemes used the same algorithms.

• Journal of Korea Multimedia Society
• /
• v.3 no.3
• /
• pp.234-240
• /
• 2000

In this paper, we propose the method in which a stream of multimedia data simultaneously transfers to the main memory and the multimedia processor from the network interface card using a conventional system bus. The proposed method can reduce the input/output time of multimedia data and improve the data stream in the system bus. Also, we compared the number of system bus accesses, bus cycles and data transmission time to the number of participants between the proposed method and the conventional methods in the multi-party video conference systems. The comparison results of performance anticipate that the number of bus accesses of the proposed method was reduced by 50%, and the total transmission time was reduced by 75% as much as the conventional method regardless of the relation of the participant numbers.