• The Journal of Engineering Geology
• /
• v.16 no.3 s.49
• /
• pp.235-244
• /
• 2006

Granite cores were sampled within Korea Atomic Energy Research Institute and cyclic loadings up to 1550 cycles were applied. Microcrack development in samples due to cyclic loading was estimated using Acoustic Emission(AE) method. AE showed two different types depending on numbers of cycle. Type 1 appeared at low cycles and had low energy and diverse frequencies, while type 2 appeared at high cycles and had high energy and uniform frequency. AE property of type 1 indicates voids and pre-existing microcracks in samples may close or propagate up to certain length. Microcracks may be sheared or closed during loading and are recovered from shear or opened during unloading when AE of type 2 were measured. P wave velocities and Felicity ratios were measured at 50, 150, 350, 750, 1550 cycles. P wave velocities were almost the same regardless of number of cycles applied. However, Felicity ratios were much lower than 0.9, indicating that microcracks were developed within samples. This result indicates that Felicity ratio is a better tool than P wave velocity to estimate the damage of rock.

• Korean System Dynamics Review
• /
• v.14 no.3
• /
• pp.135-163
• /
• 2013

This study aims to analyze the feedback loops and policy simulation of price fluctuation of Korean Cattle. The Korean Cattle market shows the 'Cycle of Beef' since 1970. In general, the market for agricultural commodities exhibit repeated cycles of prices and production. Why Beef products market in Korea shows the fluctuation of cattle and beef price repeatedly for forty years? To find an answer, this paper explores the feedback structure of the dynamics of the beef market by the systems thinking and build a stock-flow diagram model for the simulation of future behavior of the market sector of the Cattle. The dynamic simulation model was developed to identify and analyze the cyclical behavior among many variables, which is the number of cattle (calves, cow, etc.), the price of cattle, the demand for beef, the desirable number of cattle, slaughter, etc. The results of this study demonstrate that dominant feedback loops between the number of cattle and livestock prices. The demand for Beef and slaughter with time delay, also the results of the simulation to explain the persistence of future price fluctuations and actions meat market until 2025.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.5 no.2
• /
• pp.121-129
• /
• 2017

In this study, the quality of recycled aggregate for concrete was investigated as the number of recycled aggregate crushing cycles, grinder and crusher, peeling and crushing. First, the quality of density, absorption ratio and solid content was improved as the separation distance decreased and the number of crushing increased, depending on the number of crushing of recycled aggregate and the distance between mantle and cone cave. The quality of density, absorption ratio and solid content was improved as the wire mesh used in striking plate and the number of hammers increased, depending on the type of striking plate and the number of hammers.

• Korean Journal of Veterinary Research
• /
• v.39 no.3
• /
• pp.455-462
• /
• 1999

This study was designed to investigate the number of the growing and mature follicles in each stage of estrus cycle in mature rats. Eighteen mature rats(Sprague-Dawley, initially 190~230gm) were randomly alloted into 4 groups(proestrus, estrus, metestrus, and diestrus) according to estrus cycles. The uteri and ovaries of rats were collected and then alternative sections of paraffin embedding ovaries were stained with H-E. Numbers of large, middle and small follicles or only large and middle follicles from secondary and tertiary follicles were investigated by LM photography of preparations. Small follicles were defined as secondary follicles with 2~5 cell layers of granulosa cells surrounding the oocyte, and middle follicles were defined as secondary follicles with more than 5 cell layers or with early signs of antral cavity or with more than one small cleft on either side of the oocytes and large follicles were defined as tertiary follicles with a single medium or large antral cavity. The number of follicles in a pair ovary per rat was appeared to be ranged from 207 to 370 and the mean number of these follicles was $270.4{\pm}52.6$ and the mean number of follicles per ovary was $134.9{\pm}32.0$. The mean number of large, middle and small follicles per ovary was appeared to be $16.4{\pm}4.4$($12.2{\pm}3.3%$), $36.2{\pm}8.6$($26.8{\pm}6.4%$), and $82.7{\pm}24.0$($61.3{\pm}17.8%$), respectively. The mean number of large and middle follicles in each stage group of estrus cycle was appeared to be $17.8{\pm}2.1$ and $38.3{\pm}7.4$ at proestrus stage group, $15.7{\pm}5.2$ and $38.0{\pm}10.0$ at estrus stage group, $16.5{\pm}3.5$ and $33.8{\pm}7.0$ at metestrus stage group, $16.7{\pm}5.8$ and $29.7{\pm}5.5$ at diestrus group, respectively. In histological findings of large follicles during each estrus cycle, the large follicles in proestrus group contain single small antrum, thick granulosa cell layers, and were $300{\sim}500{\mu}m$ in diameter and were growing follicles with PCNA-positive cells in the granulosa cell layers, and other luteinizing follicles of proestrus cycle stage were decreased in size and were thicker in wall thickness and more luteinized than those in metestrus and diestrus stage groups. The large follicles in estrus stage group contain thick granulosa cell layers and nonprominent cumulus-oocyte complexes in antrum, and were $400{\sim}700{\mu}m$ in diameter and were growing follicles with PCNA-positive cells in the granulosa cell layers. The large follicles in metestrus and diestrus stage groups contain enlarged antrums, thinner layers of walls and prominent cumulus-oocyte complexes, and were $700-950{\mu}m$ in diameter, and were nongrowing follicles without PCNA-positive cells or another large follicles contain cells with dark stainability and distinct boundary.

• Clinical and Experimental Reproductive Medicine
• /
• v.14 no.1
• /
• pp.19-28
• /
• 1987

35 patients of normal reproductive age group (22-37 yrs) were selected for ovulation induction using $Clomid^{(R)}$ and HMG. Correlation between canalization of cervical mucus and estradiol level in plasma. morphological ovarian follicular change by ultrasonogram, Ferning and Spinnbarkeit were studied in the induced ovulatory menstrual cycles. By retrospective analysis, the results were following; 1. Canalization appeared on the eighth day of the menstrual cycle in $Clomid^{(R)}$ group, and seventh day of HMG group. And the number of the channels increased gradually until the ovulation time. 2. The mean number of channels increased from 12${\pm}$12 in $Clomid^{(R)}$ group, 19${\pm}$14 in HMG group (Day-6) to a maximum of 46${\pm}$22 in $Clomid^{(R)}$ group (Day-1). 3. The maximum plasma estradiol(E2) level was 812${\pm}$722pg/ml in $Clomid^{(R)}$ group (Day-1), 1792${\pm}$504 pg/ml in HMG group (Day-1), and there was a good statistical correlation between the number of channels and the plasma E2 level. 4. The maximal follicular diameter was 19.4${\pm}$6.7 mm in $Clomid^{(R)}$ Group (Day-1) 19.3${\pm}$4.6mm in HMG group (Day-1) and after than decreased. There was a good statistical correlation between the number of channels and the follicular diameter. 5. When grade of ferning was I, the number of channels were 19.4${\pm}$6.7 in $Clomid^{(R)}$ group, 38${\pm}$26 in HMG group. When grade of ferning was III, the number of channels were 54${\pm}$30 in $Clomid^{(R)}$ group, 71${\pm}$36 in HMG group. 6. The maximum score of Spinnbarkeit was 2.6${\pm}$0.5 in Clomid group (Day-0), 2.6${\pm}$0.5 in HMG group (Day-2). In conclusion, the phenomenon of cervical mucus canalization showed the value of the clinical use as an ovulatin marker.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.40 no.2
• /
• pp.156-162
• /
• 2011

The objective of this study is to evaluate antioxidant activities of black ginseng prepared by nine repeated steaming-drying cycles. Ethanol extracts from each cycle of ginseng showed 33.5~41.0% of yields, 36.2~44.5% of moisture content and $64\sim66^{\circ}Brix$ of soluble solids. As the number of steaming-drying cycles increased, pH decreased, while the absorbance at 420 nm increased remarkably after the 4th cycle. Although the amounts of Rg1 and Rb1 contents quite decreased, the total phenol content of black ginseng (the final cycle of ginseng) was increased to 126%, compared with that of white ginseng. Antioxidant activities, determined by ferric-reducing antioxidant potential (FRAP), 2,2'-azinobis(3 ethybenzothiazoline-6-sulfonic acid) (ABTS) radical scavenging activity, 1,1-diphenyl-2-picrydrazyl (DPPH) and hydroxyl radical scavenging activities, increased remarkably as the number of steaming-drying cycles increased. Especially, FRAP value increased 155.6%. Also, $IC_{50}$ values for DPPH and hydroxyl radical scavenging activities of the final 9th-cycling product, decreased 4.5 folds and 9.7 folds, respectively, compared with those of white ginseng. Based on these results, it was suggested that antioxidant activities of black ginseng improve according to the increasing number of steaming-drying cycles, which was derived from increase of total phenol content.

• Restorative Dentistry and Endodontics
• /
• v.43 no.2
• /
• pp.26.1-26.12
• /
• 2018

Objective: The purpose of this study was to investigate the degree of conversion (DC) and mechanical properties of a microhybrid Filtek Z250 (3M ESPE) resin composite after aging. Method: The specimens were fabricated using circular molds to investigate Vickers microhardness (Vickers hardness number [VHN]) and DC, and were prepared according to ISO 4049 for flexural strength testing. The initial DC (%) of discs was recorded using attenuated total reflectance-Fourier transforming infrared spectroscopy. The initial VHN of the specimens was measured using a microhardness tester under a load of 300 g for 15 seconds and the flexural strength test was carried out with a universal testing machine (crosshead speed, 0.5 mm/min). The specimens were then subjected to thermocycling in $5^{\circ}C$ and $55^{\circ}C$ water baths. Properties were assessed after 1,000-10,000 cycles of thermocycling. The surfaces were evaluated using scanning electron microscopy (SEM). Data were analyzed using 1-way analysis of variance followed by the Tukey honest significant difference post hoc test. Results: Statistical analysis showed that DC tended to increase up to 4,000 cycles, with no significant changes. VHN and flexural strength values significantly decreased upon thermal cycling when compared to baseline (p < 0.05). However, there was no significant difference between initial and post-thermocycling VHN results at 1,000 cycles. SEM images after aging showed deteriorative changes in the resin composite surfaces. Conclusions: The Z250 microhybrid resin composite showed reduced surface microhardness and flexural strength and increased DC after thermocycling.

• Clinical and Experimental Reproductive Medicine
• /
• v.38 no.3
• /
• pp.148-152
• /
• 2011

Objective: Laser-assisted intracytoplasmic sperm injection (LA-ICSI), also known as micro-opening or thinning of the zona pellucida (ZP) prior to ICSI, may help to reduce mechanical damage to the oocyte during the procedure. The aim of the present study was to evaluate and analyze the efficacy of our institutional LA-ICSI program, which features laser-assisted ZP thinning prior to ICSI, in comparison with conventional ICSI (C-ICSI), performed on patients with different clinical characteristics. Methods: Patients undergoing a total of 212 ICSI cycles were randomly divided into an LA-ICSI group (106 cycles) and a conventional ICSI group (106 cycles). To reduce tissue damage, we thinned the ZP by approximately 70%, using a laser, before ICSI. Patients thus treated formed the LAICSI group. Comparisons included the morphological quality of transferred embryos, blastocyst development of the remaining embryos, and clinical pregnancy, in terms of ICSI method and patient characteristics. Results: Fertilization, development of remaining embryos, and pregnancy rate were significantly higher in the LA-ICSI group compared with the C-ICSI group. Fertilization, embryonic development, and the pregnancy rate were all improved in younger patients (<38 years of age) and in those who underwent a low number of IVF-ET attempts (<3 trials). In addition, the pregnancy rate was increased in older patients. Conclusion: LA-ICSI may be useful in improving the chance of pregnancy in all ICSI patients.

• Geomechanics and Engineering
• /
• v.11 no.6
• /
• pp.739-756
• /
• 2016

The shear strength reduction finite element method (SSRFEM) is a powerful tool for slope stability analysis. The factor of safety (FOS) of the slope can be easily calculated only through reducing effective cohesion (c′) and tangent of effective friction angle ($tan{\varphi}^{\prime}$) in equal proportion. However, this method may not be applicable to soil slope under wetting-drying cycles (WDCs), because the influence of WDCs on c′ and $tan{\varphi}^{\prime}$ may be different. To research the method of estimating FOS of soil slopes under WDCs, this paper presents an experimental study firstly to investigate the effects of WDCs on the parameters of shear strength and stiffness. Twelve silty clay samples were subjected to different number of WDCs and then tested with triaxial test equipment. The test results show that WDCs have a degradation effect on shear strength (${\sigma}_1-{\sigma}_3)_f$, secant modulus of elasticity ($E_s$) and c′ while little influence on ${\varphi}^{\prime}$. Hence, conventional SSRFEM which reduces c′ and $tan{\varphi}^{\prime}$ in equal proportion cannot be adopted to compute the FOS of slope under conditions of WDCs. The SSRFEM should be modified. In detail, c′ is merely reduced among shear strength parameters, and elasticity modulus is reduced correspondingly. Besides, a new approach based on sudden substantial changes in the displacement of marked nodes is proposed to identify the slope failure in SSRFEM. Finally, the modified SSRFEM is applied to compute the FOS of a slope example.

• Corrosion Science and Technology
• /
• v.14 no.4
• /
• pp.177-183
• /
• 2015

Prestressed Concrete steel Cylinder Pipe (PCCP) is extensively used as seawater pipes for cooling in nuclear power plants. The internal surface of PCCP is exposed to seawater, while the external surface is in direct contact with underground soil. Therefore, materials and strategies that would reduce the corrosion of its cylindrical steel body and external steel wiring need to be employed. To prevent against the failure of PCCP, operators provided a cathodic protection to the pre-stressing wires. The efficiency of cathodic protection is governed by the anodic performance of the system. A mixed metal oxide (MMO) electrode was developed to meet criteria of low over potential and high corrosion resistance. Increasing coating cycles improved the performance of the anode, but cycling should be minimized due to high materials cost. In this work, the effects of $RuCl_3$ concentration on the electrochemical properties and lifespan of MMO anode were evaluated. With increasing concentration of $RuCl_3$, the oxygen evolution potential lowered and polarization resistance were also reduced but demonstrated an increase in passive current density and oxygen evolution current density. To improve the electrochemical properties of the MMO anode, $RuCl_3$ concentration was increased. As a result, the number of required coating cycles were reduced substantially and the MMO anode achieved an excellent lifespan of over 80 years. Thus, we concluded that the relationship between $RuCl_3$ concentration and coating cycles can be summarized as follows: No. of coating cycle = 0.48*[$RuCl_3$ concentration, $M]^{-0.97}$.