• Journal of Environmental Policy
• /
• v.14 no.3
• /
• pp.3-19
• /
• 2015

In this paper, we reviewed the method of replacing the number of registered vehicles with the number of trips to more realistically calculate vehicle emissions. Using the Korea Transport Data Base (KTDB) in replacing the number of registered vehicles with adjusted number of registered vehicle by specific vehicle type in the metropolitan area, the results by region showed that Seoul had the widest rate of error and that, among vehicles, trucks had the widest rate of error. Also, the absolute value of deviation of registered vehicles and adjusted number of registered vehicle influenced by the calculation of the quantity of vehicle emissions showed that out of the metropolitan regional government all trucks showed the widest deviation. The results of calculating the quantity of vehicle emissions showed an average of 9% difference between the emissions based on the number of registered vehicles and the emissions based on adjusted number of registered vehicle.

• Resources Recycling
• /
• v.10 no.3
• /
• pp.3-13
• /
• 2001

The Korean Auto industry has developed remarkably over the past 30 years. In 2000 alone, Korea produced 3.11 million vehicles, and the number of vehicles registered surpassed the ten million mark. As the number of vehicles registered in Korea has increased, yew after you, a rising number of cars have been scrapped. In 2000, a total of 455,592 automobiles were scrapped, up dramatically from only 101,158 in 1989. The system for handling of ELV(End-of-Life Vehicles) in Korea is governed by the "Motor Vehicle Control Act". The Act places the responsibility for vehicle scrapping directly on the vehicle owners. h vehicle owner can only can eel a vehicle registration after he gets a certificate from an authorized vehicle dismantler showing that his vehicle was properly scrapped according to the law. The take-back rate of ELV reaches nearly 100% in Korea. The vehicle scrapping process in Korea is very similar to those in other countries. fluids such as fuels and oils are first removed, and recyclable parts are collected and separated. Engines and transmissions are dismantled and recycled for use as raw material. Plastics, which are not easily reused, are generally treated as industrial wastes. The "Motor Vehicle Control Act" prohibits reuse of certain parts in order to guarantee the safety of the used auto parts. However, some restrictions on the reuse of auto parts have recently been eased to promote recycling. In this paper, additionally, car recycling policy of the foreign countries such as Japan, Germany and EU were reviewed.

• Journal of Environmental Science International
• /
• v.26 no.1
• /
• pp.55-65
• /
• 2017

Average concentration of PM in Seoul metropolitan area satisfied the Korean air quality standard in 2010. Furthermore, concentration of PM in all boroughs across Seoul met the air environment standard in 2012. $PM_{10}$ concentration was relatively higher in center of Seoul in comparison to the rest, while $PM_{2.5}$ concentration showed exactly the contrary result. We analyzed the effect that PM emissions from vehicles would have on PM concentrations across Seoul. The results showed that average annual PM concentration recently decreased in Seoul although the number of vehicles registered annually continued its upward trend. By contrast, average fine dust concentrations in Seoul showed a decline which suggested that correlation between annual average PM concentrations and number of registered vehicles remained low. However, year-on-year vehicle registration rate recently showed a declining tendency in the same way as the trend of changes in average PM concentrations. Particularly, the upward trend in annual average PM concentrations in 2002 and 2007 was consistent with the increase in vehicle registration rate, suggesting that vehicle registration rate was closely associated with changes in PM concentrations.

• Proceedings of the Safety Management and Science Conference
• /
• 2001.05a
• /
• pp.211-215
• /
• 2001

In the last year, the number of registered vehicles in Korea surpassed the 12 million mark, and increase in number continuously Nowdays, this tendency has raised some problems inevitably in the view of expansion of ELV(end of life vehicle) and earth environment pollution resulted from it. For the proper scope with this environment pollution, recycling of parts and materials, minimization of wastes are desirable. And application of disassembly technology is required for it necessarily. Therefore it is essential to study systematically about disassembly technology of ELV with high efficiency for improvement recycling ratio and diminution shredder dust amount also in Korea.

• Korean Journal of Artificial Intelligence
• /
• v.9 no.2
• /
• pp.29-34
• /
• 2021

In this paper, for efficient parking control, in an Arduino environment, an intelligent parking control prototype was implemented to provide parking control and parking guidance information using HC-SR2O4 and RC522. The main elements of intelligent parking control are vehicle recognition sensors, parking control facilities, and integrated operating software. Whether the vehicle is parked on the parking surface may be confirmed through sensor or intelligent camera image analysis. Parking control equipment products include parking guidance and parking available display devices, vehicle number recognition cameras, and intelligent parking assistance systems. This paper applies and implements ultrasonic sensors and RFID concepts based on Arduino, recognizes registered vehicles, and displays empty spaces. When a vehicle enters a parking space to handle this function, the automatic parking management system distinguishes the registered vehicle from the external vehicle through the RC522 sensor. In addition, after checking whether the parking slot is empty, the HC-SR204 sensor is displayed through the LED so that the driver can visually check it. RFID is designed to check the parking status of the server in real time and provide the driver with optimal route service to the parking slot.

• Journal of Energy Engineering
• /
• v.19 no.1
• /
• pp.39-50
• /
• 2010

Hybrid Electric Vehicle(HEV) and Plug-in Hybrid Electric Vehicle(PHEV) will replace Conventional Gasolene Engine Vehicle at a rapid rate to eliminate emission gases and improve fuel economy. This review describes Fuzzy Logic Control strategy and Optimization for Parallel Hybrid Electric Vehicle. Recent progress on Electric Motor and Li-ion Battery for HEV and PHEV are given. Analysis on competitiveness of Korean HEV and PHEV technology based on the number of papers published and patents registered are also performed.

• Journal of the Korean Society of Safety
• /
• v.37 no.6
• /
• pp.158-165
• /
• 2022

Eco-friendly policies proposed by the government of The Republic of Korea have encouraged the use of eco-friendly vehicles. Hydrogen vehicles have exhibited the highest growth rate, although the current number of registered vehicles is low. In hydrogen vehicles, a thermally activated pressure relief device (TPRD) is installed to prevent explosions in the hydrogen gas cylinder. When discharged due to low ignition energy, hydrogen gas readily forms a jet flame. The risks induced by such jet flames were analyzed through a numerical analysis. Jet flames can activate TPRDs installed in nearby hydrogen gas cylinders. As a result, high-voltage cables exposed in the lower area of a vehicle can ignite within seconds. There was a 9.5-kW/m2 area around the vehicle (which can result in casualties) at a distance of ~5 m from the hydrogen gas cylinder, and a 37.5-kW/m2 area (which can cause significant damage) in the form of an inverted triangle toward the lower section of the vehicle. We believe that the risk factors analyzed herein should be considered for addressing accidents in hydrogen vehicles.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.4
• /
• pp.595-604
• /
• 2013

Currently, registered number of imported vehicles is increasing rapidly over the years. Accordingly, environment improvements of vehicle maintenance company for maintenance of luxury vehicle such as imported vehicle are continuously being made. In this paper, we propose a key frame extraction method based on HSV color model for smart vehicle management system implementation to offer for customer reliability of maintenance vehicle. After automatically recognize the license plates of the vehicle using vehicle license plate recognition system when the vehicle come in the car center, we check the repair history and request of the vehicle based on it. We implement mobile services which provide extracted key frame images to the user after extract key frames from vehicle repair video. In addition, we verify the superiority of key frame extraction method by applying a smart vehicle management system. Finally, we convert the RGB color to HSV color to improve the performance of proposed key frame extraction scheme. As a result, we confirmed that our scheme is more excellence about 30% in terms of recall than RGB color model from the performance evaluations.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.7 no.8
• /
• pp.34-42
• /
• 1999

In late 1997, the portion of registered light-duty diesel vehicle was 25.3% and its emission rate was 17.1% in Korea. Especially, diesel particulate matters(DPM) and NOx are hazardous air pollutants to human health and environment in urban area. The reduction technologies of exhaust emissions from diesel engines are improvement of engine combustion, fuel quality and development of diesel exhaust after treatment , In this study , a light-duty diesel oxidation catalyst(DOC) that is one of the diesel exhaust after treatment was made for performance evaluation and the emission characteristics were tested on CVS-75 mode. And the analysis of the particle size distribution with scanning mobility particle 100, 67.6% and 66.7, 10.0% for Pt and Pt-V catalyst .And for Pt catalyst, the PM increased 7.8% because of increasing sulfate but Pt-V catalyst reduced the PM to 23.0% . Test results of particle size distribution showed that peak values of number and mass densities are respectively 100∼200nm their distribution trend independent of vehicle speed.

• Journal of Auto-vehicle Safety Association
• /
• v.13 no.2
• /
• pp.50-56
• /
• 2021

The purpose of this study is to investigate vulnerable parts of tower crane structures by analyzing extensive non-destructive test data. Approximately ten percent of domestically registered tower cranes were inspected by using magnetic particle inspection. The testing was carried out as advised in KS B 0213. The non-destructive results was analyzed with respect to jib types, age and crane size. As a result, the number of crack occurrences were the largest in mast parts, followed by main jib part. Moreover, it was found that turntables were important parts deserved to be noticed at the perspective of safe maintenance.