• Journal of Advanced Marine Engineering and Technology
• /
• v.23 no.4
• /
• pp.523-532
• /
• 1999

This study is aimed to obtain fundamental knowledge of pulse laser welding phenomena the authors investigated the structure and composition of evaporated particles of Al alloys in air and in the Ar atmosphere during pulsed laser welding. The ultra-fine particles of 5 to 100nm diameter in a globular or irregular shape were formed in laser-induced plasma and the main structure was $MgAl_2O_4$ The composition of particles was ifferent depending on the power density of a laser beam; namely under the low power density conditions magnesium was predominant in the parti-cles while aluminium content increased with an increase in the power density. These results were attributed to evaporation phenomena of metals with different boiling points and latent heats of vaporization. On the other hand the number density of laser-induced plasma species was obtained by Saha's equation. it was confirmed that the number density depends upon the plasma tempera-ture and total pressures.

• Journal of Information Processing Systems
• /
• v.16 no.1
• /
• pp.145-154
• /
• 2020

Maximum likelihood (ML) is the best estimator asymptotically as the number of training samples approaches infinity. This paper deduces an adaptive algorithm for blind signal processing problem based on gradient optimization criterion. A parametric density model is introduced through a parameterized generalized distribution family in ML framework. After specifying a limited number of parameters, the density of specific original signal can be approximated automatically by the constructed density function. Consequently, signal separation can be conducted without any prior information about the probability density of the desired original signal. Simulations on classical biomedical signals confirm the performance of the deduced technique.

• Atmosphere
• /
• v.15 no.3
• /
• pp.149-153
• /
• 2005

A balloon-borne Optical Particle Counter (hereafter "OPC Sonde"), which was developed by the atmospheric research group of Nagoya University, is used for getting the information of vertical profile of particle size and concentration in Anmyeon ($36^{\circ}32^{\prime}N$ $126^{\circ}19^{\prime}E$) on 18 March 2005. A range of five different particle sizes is shown in the vertical profile of aerosol number density estimated from the OPC Sonde. It was found that small size particles have vertically larger aerosol number density than relatively big ones. For all size ranges the vertical aerosol number density shows a decreased pattern as the altitude becomes higher. The aerosol number density of $0.3{\sim}0.5{\mu}m$, $0.5{\sim}0.8{\mu}m$, $0.8{\sim}1.2{\mu}m$ size ranges at the 10km height, which is the tropopause approximately, are $1,000,000ea/m^3$, $100,000ea/m^3$, $10,000ea/m^3$ respectively. The data of OPC Sonde are also compared with the data of PM10 $\beta$-ray) and Micro Pulse Lidar which are operating at Korea Global Atmosphere Watch Observatory in Anmyeon.

• Korean Journal of Poultry Science
• /
• v.27 no.1
• /
• pp.63-71
• /
• 2000

The testis is an extremely heterogeneous organ, containing numerous compartments types. Morphometric studies were performed of 3 avian species (pigeon, pheasant and chicken) to determine volume density absolute volume, numerical density, total number of serminiferous tubule components, and sperm production, especially those related to the Sertoli cell, and to make comparisons among the species. Volume density of seminiferous tubule components per testis was determined by point counting method. Testis volume and sperm production were measured by routine techniques. Numerical density (the number of cells per unit volume of testis) of seminiferous tubule components per testis was determined by morphometry (Floderus method). The volume density of seminiferous tubules per testis was 91.58, 92.18 and 94.21% in pigeon, pheasant, and chicken, respectively. The volume density of spermatogonium, spermatocyte, spermatid, spermatozoon, and Sertoli cell did not produce significant changes in the three species. The absolute volume of spermatogonium, spermatocyte, spermatid, and Sertoli cell showed significant changes in the three species (p<0.05). The average volume of Sertoli cell ranged from 758.34(pheasant) to 1,212.9 ㎛$^3$(chicken) and was not significantoy different in the three species(p>0.05). The number of Sertoli cells per testis showed significant differences in the three species : 34.52 $\times$10(sup)6, 186.82$\times$10(sup)6, 810.62$\times$10(sup)6 in pigeon, pheasant, and chicken, respectively(p<0.05). The sperm production was significantly different in the three species : 3,018$\times$10(sup)6, 993.9$\times$10(sup)6, and 8.9$\times$10(sup)6 in chicken, pheasant, and pigeon, respectively(p<0.05). These results suggest that number of Sertoli cells may be more important than Sertoli cell size in explaining the difference in sperm production among the three species.

• Korean journal of applied entomology
• /
• v.58 no.1
• /
• pp.49-54
• /
• 2019

Clover cyst nematode, Heterodera trifolii are one of the major pests that damage Chinese cabbage in high land cultivation area and have recently been distributed in Korea. This study was conducted to investigate the effect of temperature and inoculation density on the proliferation of clover cyst nematode. The clover cyst nematode was proliferated at $15-30^{\circ}C$ and the egg, female adult and cyst number was the highest at $20^{\circ}C$. As the inoculation density increased, the number of female cyst nematodes increased with the inoculation density and when 16 eggs were inoculated per gram of soil, the amount of growth, number of egg and cyst was the highest. Number of females and eggs were formed more in cabbage than in kale regardless of inoculation density. Chinese cabbage was a favorable host for clover cyst nematode growth than kale.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.1
• /
• pp.107-116
• /
• 2014

A volume density of roughness correction blocks in a channel is defined and the corresponding roughness coefficient(n) is estimated by analyzing the diverse hydraulic characteristics of VR, the product of the average velocity and the hydraulic radius, block Reynolds number ($Re^*$), drag coefficient ($\acute{C}_D$), and the roughness coefficient ($n_b$) of bottom shear. The increase of VR and block Reynolds number causes the exponential decrease of roughness coefficient converged to a constant value as expected. The drag coefficient also exponentially decreases as block Reynolds number increases as well. The drag force is governed by the block shape defined by volume density in high block Reynolds number of turbulent flow region. For more accurate estimation of roughness coefficient the use of the correlation equation of it is required by block Reynolds number and volume density. The regression equations for n-VR, $\acute{C}_D-Re^*$, and $n_b-\acute{C}_D$ are presented. The regression equations of roughness coefficient are also presented by block Reynolds number and volume density. The developed equation of roughness coefficient by block Reynolds number and volume density has practical use by confirming the coincidence between the experimental results and the results of HEC-RAS using the developed equation.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.29 no.1
• /
• pp.62-66
• /
• 1984

One row of pollen parent to two rows of seed parent (1:2), 2:4 and solid (1:2) planting patterns (PP) were compared in seed parent densities of 3,500, 5,000 and 6,500 plants per 10 ares to determine effects of PP and plant density on growths of seed and pollen plants, and seed yield of seed parent of modified single cross corn hybrid. Planting pattern did not significantly affect agronomic characteristics of seed plant except ear number per 100 plants and seed yield which were greater in solid and 1:2 PP than in 2:4 PP. Significant PP x plant density interaction did not exist for agronomic characteristics of seed parent. In the seed parent, plant height and 100 kernel weight were not affected by plant density, but ear height, ear number per 100 plants, and kernel number per ear were linearly decreased with increased plant densities. Seed yield ranged from 330 to 460 kg per 10 ares and overall yield response to plant density was quadratic. Tassel length and spikelet number per tassel of the pollen parent were significantly affected by PP and plant density. Significant PP x plant density interaction existed for tassel length and spikelet number per tassel. Tassel length and spikelet number per tassel were greater in 1:2 and 2:4 PP compared to solid PP and were greatly reduced with increased plant densities in solid and 1:2 PP. The results indicated that 1:2 or 2:4 PP at around 5,000 plants per 10 ares for seed parent would be suitable for seed production of modified single cross com hybrid.

• Plant Resources
• /
• v.8 no.3
• /
• pp.258-262
• /
• 2005

In autumn, to determine the optimal planting date and plant density of rapeseed in southern areas of Korea, Yudal variety for autumn sowing, the highest yielding variety was grown under three different planting dates and five different plant densities. Yield components such as plant height, ear length, number of seedling stand per $m^2$, number of branches and pod length were highest at the plots with Sep. 30 of planting date and 30/20 cm drilling of plant density. Yield of seed, oil and 1,000 grains weight were highest at the Sep.30 of planting date and 30/20 cm drilling of plant density. Judging from the results reported above, at optimum planting date and plant density of rapeseed seemed to be Sep.30 of planting date and 30/20cm plant density in autumn sowing.

• Progress in Medical Physics
• /
• v.16 no.4
• /
• pp.161-165
• /
• 2005

The CT number corresponds to electron density and its influence on dose calculation was studied. Five kinds of CT scanners were used to obtain Images of electron density calibration phantom (Gammex RMI 467), Then the differences between CT numbers for each scanners were ${\pm}2\%$ In homogeneous medium and $9.5\%$ in high density medium. In order to Investigate the influence of CT number to dose calculation, patients' thoracic CT images were analyzed. The maximum dose difference was $0.48\%$ for each organ. It acquired the phantom Images inserted high density material in the water phantom. Comparing the doses calculated with CT Images from each CT scanner, the maximum dose difference was $2.1\%$ in 20 cm in depth. The exact density to CT number conversion according to CT scanner is required to minimize the uncertainty of dose depends on CT number Especially the each hospital with various CT scanners has to discriminate CT numbers for each CT scanner. Moreover a periodic quality assurance is required for reproducibility of CT number.

• Korean Journal of Medicinal Crop Science
• /
• v.23 no.3
• /
• pp.198-206
• /
• 2015

This study was conducted to investigate the effects of sowing density, number of seeds sown per hole, and thinning treatment on growth characteristics and disease occurrence in Panax ginseng under direct sowing cultivation in a blue plastic greenhouse. Seedling were grown from 2 or 3 seeds sown, and the healthiest was only retained, while the rest were thinned out at the foliation stage. $NO_3$-N, $P_2O_5$, and organic matter content differed significantly between growth conditions in the plastic greenhouse and in conventional shade in the soil. Disease also tended to be higher in the conventional shade than in the plastic greenhouse. Plant height and stem length showed an increasing trend with increasing sowing density and number of seeds sown per hole. However, these measures noticeably decreased when thinning treatment was conducted. Growth of the subterranean part of ginseng was not markedly influenced by sowing density, the number of seeds sown per hole, or thinning treatment. Root weight, which is an important factor in yield, was significantly affected by the number of seeds sown and thinning treatment. Interestingly, root weight tended to be higher in the thinning treatment plot than the untreated control plot. Damping-off and root rot increased noticeably as the number of seeds sown increased. Disease also tended to be substantially higher in the thinning treatment plot than the untreated control. However, physiological disorder of the plants did not vary with sowing density, the number of seeds sown, or thinning treatment.