• 한국정밀공학회지
• /
• 제16권2호통권95호
• /
• pp.50-59
• /
• 1999

The effect of a variant drain orifice damping on the characteristics of a servovalve flapper-nozzle stage is analyzed. Steady-state characteristics of flapper-nozzle stage and the linearized dynamics of flapper-nozzle assembly with a spool valve show that the variant drain orifice damping could improve such null performance characteristics as null pressure sensitivity and linearity of gain function. Generalized design criterion and a sufficient condition for servovalve stability are also established.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.161-166
• /
• 2001

The static characteristics of four-nozzle flapper valves are investigated with both constant flow and constant supply pressure. The ranges, in which linearization of these characteristics would be valid, are discussed. Linearized dynamic model is also derived. Numerical simulations of nonlinear dynamic model are carried out by HyPneu to make an assessment of the effect of input step size in both cases of no-load and blocked-load operation.

• 한국정밀공학회지
• /
• 제17권8호
• /
• pp.165-171
• /
• 2000

In this study the 4-way spool valve characteristics are clearly defined and clearly defined and proposed new type of spool valve. This paper presents governing equations of the flow through clearances between sleeve and spool as a model of orifice flow for null characteristics analysis and programmed analysis software of it. This software is possible to basically analysis that not only which case of open center closed center or critical center but _ -displacement of spool lab position boundary region and spool opening of the valve and to estimate the pressure variation in the spool and external leak flow variation. We are convinced that the scale of load pressure difference is changed as lab condition of valve and this scale is changed with boundary point on the annular clearance. It is vary useful to designer and user of spool valve with this design data and analysis software.

• Journal of information and communication convergence engineering
• /
• 제7권3호
• /
• pp.392-398
• /
• 2009

A novel approach is presented to improve the array performance of the alternate mainbeam nulling in a linearly constrained adaptive array processor in coherent environment. The convergence parameters in the linearly constrained LMS algorithm with a unit gain constraint and a null constraint in the direction of the desired signal are adaptively estimated to reduce the error power between the desired signal and the array output in the 2-dimensional convergence parameter space. It is shown that the case for estimating the convergence parameter for the unit gain constraint with that for null constraint fixed performs best. Also, it is observed that the proposed method performs significantly better than conventional methods as the number of coherent interferences increases.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제6권12호
• /
• pp.3237-3256
• /
• 2012

In the context of effective usage of a scarce spectrum resource, emerging wireless communication standards will demand spectrum sharing with existing systems as well as multiple access with higher spectral efficiency. We mathematically analyze the sum throughput of a spectrum sharing space-division multiple access (SDMA) system, which forms a transmit null in the direction of other coexisting systems while satisfying orthogonal beamforming constraints. For a large number of users N, the SDMA throughput scales as log N at high signal-to-noise ratio (SNR) ((J-1) loglog N at normal SNR), where J is the number of transmit antennas. This indicates that multiplexing gain of the spectrum sharing SDMA is $\frac{J-1}{J}$ times less than that of the non-spectrum sharing SDMA only using orthogonal beamforming, whereas no loss in multiuser diversity gain. Although the spectrum sharing SDMA always has lower throughput compared to the non-spectrum sharing SDMA in the non-coexistence scenario, it offers an intriguing opportunity to reuse spectrum already allocated to other coexisting systems.

• 한국항행학회논문지
• /
• 제20권3호
• /
• pp.218-225
• /
• 2016

일반적으로 알려진 GPS 항재밍 기술로는 재밍 방향에 대한 감쇄효과를 얻는 널 스티어링 (null steering)과 위성방향으로의 추가 합성이득을 얻는 빔 스티어링 (beam steering) 방식이 있다. 이 신호처리 알고리즘을 소개하는 문헌에 의하면, 수학 공리에 따라 동시처리 가능한 재밍의 개수는 배열안테나 소자의 개수 N 에서 기준 안테나 1개를 제외한 N-1 개에 대해서만 유효하다는 표현을 하지만, 재머 배치나 비행체의 자세 그리고 둘 간의 상대적 배치 등 실질적인 운용 조건을 고려한 알고리즘 특성에 대한 분석은 알려져 있지 않다. 이에 본 논문에서는 4소자 및 7소자 표준 배열안테나가 적용된 항재밍 시스템을 모델링하여 비행체의 자세(수평, 수직)와 재머 배치, 그리고 안테나 소자 수를 고려한 두 항재밍 알고리즘(PM, LCMV)에 대한 성능 분석을 하였다. 결과적으로, 동일한 JSR 환경임에도 불구하고, 위성 신호와 재밍 신호 간 입사각이 상대적으로 큰 비행체의 수직 자세의 경우 수평 자세보다 약 10 dB 이상의 이득이 있음을 시뮬레이션을 통해 제시 하였다.

• 대한전자공학회논문지TC
• /
• 제47권12호
• /
• pp.1-7
• /
• 2010

본 논문에서는 OFDM 시스템에서 추가적인 안테나 개수의 증가 없이 기존의 OFDM 시스템과 비교하였을 경우 보다 큰 다이버시티 이득을 획득함으로서 시스템 성능을 향상시키기 위한 기술을 제안한다. 제안된 기술은 주파수 선택적 채널에서 상이한 채널을 겪는 두 개의 부반송파를 그룹화해서 각 그룹의 부반송파에 할당되는 심볼을 공유한다. 제안된 변조 기법은 QPSK 기법과 동일한 심볼간 최소거리를 가지며 주파수 선택적 채널하에서 다이버시티 획득이 가능하도록 한다. 또한 제안된 성상도에 의해 발생하는 Null 심볼에 할당된 부반송파들을 유용하게 이용하여 데이터 전송 효율을 높일 수 있다.

• 드라이브 ㆍ 컨트롤
• /
• 제9권4호
• /
• pp.32-41
• /
• 2012

Most diagnosis methods for servo valves requires installing spool displacement sensor or flow sensor as well as pressure sensor. The measurement of flow is hard to implement and many kinds of servovalves or proportional direction valves do not have a built-in spool displacement sensor. In this study, static performances of servovalve or proportional-direction-valve are studied theoretically and a diagnosis technique, which uses only load pressure and input current signal, is assessed. An experimental setup was made based upon a personal computer and the LabVIEW graphical language. A series of diagnosis tests were performed and the analysis results showed it possible to measure the pressure gain, hysteresis and null bias in a relatively simple methodology.

• 한국전자파학회논문지
• /
• 제23권10호
• /
• pp.1128-1136
• /
• 2012

본 연구에서는 기존의 기계적 조향 방식에 의한 이동 통신 서비스 음영 지역 문제점을 개선하기 위해서 배열 안테나 빔 패턴의 null-steering 기법에 기반한 전기적 빔 조향 장치를 연구하였다. 특히, 하향 $-10^{\circ}{\sim}0^{\circ}$ 이내에서 빔 조향이 가변될 수 있도록 기지국 안테나 수직 빔 패턴의 $-30^{\circ}{\sim}0^{\circ}$ 범위에 존재하는 null을 제거하여 하향 방향에서 전파 음영을 개선하였다. 이때 안테나의 요구 사양은 하향 조향각 조절 범위 내에서 14.5 dBi의 이득과 부엽 세기는 -18 dB 이하로 억제되어야 한다. 또한, 편파의 격리도는 30 dB 이상을 나타내어야 한다. 본 연구의 타당성을 보이기 위해 W-CDMA용 기지국 안테나 및 빔 조향 장치를 설계 제작하여 그 유용성을 보였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집B
• /
• pp.121-126
• /
• 2001

In this study, the 4-way spool valve characteristics are clearly defined and proposed new type of spool valve. This paper presents governing equations of the flow through clearances between sleeve and spool as a model of orifice flow for null characteristic analysis, and programmed analysis software of it. This software is possible to basically analysis that not only which case of open center, closed center or critical center but +,- displacement of spool, lab position, boundary region and spool opening of the valve, and to estimate the pressure variation in the spool and external leak flow variation. We are convinced that the scale of load pressure difference is changed as lab condition of spool valve, and this scale is changed with boundary point on the annular clearance. It is vary useful to designer and user of spool valve with this design data and analysis software.