• Nuclear Engineering and Technology
• /
• 제54권9호
• /
• pp.3310-3316
• /
• 2022

Owing to the rising concerns about the safety of nuclear power plants (NPP), it is essential to study the venturi scrubber in detail, which is a key component of the filtered containment venting system (FCVS). FCVS alleviates the pressurein containment byfiltering and venting out the contaminated air. Themain objective of this research was to perform a CFD investigation of different configurations of a circular, non-submerged, self-priming venturi scrubber to estimate and improve the performance in the removal of elemental iodine from the air. For benchmarking, a mass transfer model which is based on two-film theory was selected and validated by experimental data where an alkaline solution was considered as the scrubbing solution. This mass transfer model was modified and implemented on a unique formation of two self-priming venturi scrubbers in series. Euler-Euler method was used for two-phase modeling and the realizable K-ε model was used for capturing the turbulence. The obtained results showed a remarkable improvement in the removal of radioactive iodine from the air using a series combination of venturi scrubbers. The removal efficiency was improved at every single data point.

• 산업공학
• /
• 제17권spc호
• /
• pp.37-45
• /
• 2004

Human factors engineering design guidelines for main control rooms(MCR) in nuclear power plants(NPP) have been applied to optimize human-machine interface(HMI) between operators and their equipment on the basis of physical, physiological and cognitive aspects. However, the HMI design for MCR is not found to be sufficient to maximize operators' performance since the operators in the MCR experience excessive stress due to the environmental factors such as inappropriate interiors and illumination. Therefore, well-designed environment of the MCR may be equally important to improve human performance in the MCR. The objectives of the study are two-fold: (1) to propose an interior design of SHIN-KORI 1 2 for pleasant and comfortable working environments, and (2) to design indirect lighting system to enhance visibility and productivity. The human factors engineering checklists were developed to examine whether or not the proposed human-environment design for SHIN-KORI 1 2 satisfies the regulations and guidelines presented by NUREG-0700 Revision 1. The implications of the human-environment design are discussed in detail.

• Journal of Radiation Protection and Research
• /
• 제36권2호
• /
• pp.99-106
• /
• 2011

원전에서 발생하는 방사성핵종 중에서 방사선작업종사자와 원전주변에 거주하는 일반인에 대한 피폭방사선량평가 측면에서 중요한 핵종 중에 하나가 삼중수소이다. 삼중수소는 인간의 체내로 섭취되어 내부피폭을 일으킨다. 원전 종사자 전체 피폭방사선량의 약 7%, 원전주변 일반인 피폭방사선량의 약 60-90%가 삼중수소에 의한 피폭으로 발생하고 있다. 이에 따라 국내외 연구소에서는 삼중수소에 대한 정확한 피폭방사선량 평가를 위해 많은 연구를 진행하고 있다. 본 논문은 삼중수소의 인체대사모델과 피폭방사선량 평가와 관련한 국내외 연구개발 동향을 정리하였고, 현안사항을 정리하였다.

• Nuclear Engineering and Technology
• /
• 제52권7호
• /
• pp.1462-1470
• /
• 2020

Reliability in safety-critical systems and equipment is of vital importance, so the probabilistic safety assessment (PSA) has been widely used for many years in the nuclear industry to address reliability in a quantitative manner. As many nuclear power plants (NPPs) become digitalized, evaluating the reliability of safety-critical software has become an emerging issue. Due to a lack of available methods, in many conventional PSA models only hardware reliability is addressed with the assumption that software reliability is perfect or very high compared to hardware reliability. This study focused on developing a new method of safety-critical software reliability quantification, derived from hardware-software integrated environment testing. Since the complexity of hardware and software interaction makes the possible number of test cases for exhaustive testing well beyond a practically achievable range, an importance-oriented testing method that assures the most efficient test coverage was developed. Application to the test of an actual NPP reactor protection system demonstrated the applicability of the developed method and provided insight into complex software-based system reliability.

• Nuclear Engineering and Technology
• /
• 제44권5호
• /
• pp.471-482
• /
• 2012

To assess the risk of nuclear power plant operation and to determine the risk impact of digital systems, there is a need to quantitatively assess the reliability of the digital systems in a justifiable manner. The Probabilistic Risk Analysis (PRA) is a tool which can reveal shortcomings of the NPP design in general and PRA analysts have not had sufficient guiding principles in modelling particular digital components malfunctions. Currently digital I&C systems are mostly analyzed simply and conventionally in PRA, based on failure mode and effects analysis and fault tree modelling. More dynamic approaches are still in the trial stage and can be difficult to apply in full scale PRA-models. As basic events CPU failures, application software failures and common cause failures (CCF) between identical components are modelled.The primary goal is to model dependencies. However, it is not clear which failure modes or system parts CCF:s should be postulated for. A clear distinction can be made between the treatment of protection and control systems. There is a general consensus that protection systems shall be included in PRA, while control systems can be treated in a limited manner. OECD/NEA CSNI Working Group on Risk Assessment (WGRisk) has set up a task group, called DIGREL, to develop taxonomy of failure modes of digital components for the purposes of PRA. The taxonomy is aimed to be the basis of future modelling and quantification efforts. It will also help to define a structure for data collection and to review PRA studies.

• 에너지공학
• /
• 제23권3호
• /
• pp.186-190
• /
• 2014

원자력발전소는 냉각재상실사고(LOCA)와 같은 과도상태시 pH 조절을 통해 격납건물의 핵분열생성물(요오드) 제거 능력을 유지한다. 이와 더불어 격납건물 내부의 스테인레스강 기기들의 응력부식균열(Stress Corrosion Cracking)을 방지하고 알루미늄 또는 아연 부식에 의한 수소생성을 최소화할 수 있기 때문에 살수 및 집수조냉각수의 화학조건(pH) 조절능력이 요구된다. 현재 원전은 LOCA시 능동형 살수첨가제인 NaOH를 사용하여 격납건물 살수 및 집수조냉각수의 pH를 조절하도록 설계되어있다. 본 논문에서는 LOCA시 집수조냉각수의 pH를 분석하고, 살수화학조건 pH 관련 최신규제요건인 표준심사지침(SRP) 6.5.2에 따라 핵분열생성물제거상수 및 제염계수를 계산하였다. 분석결과, 격납건물집수조 pH는 8.09~9.67로서 설계기준을 만족한다. 그리고 격납건물살수계통에 의한 핵분열생성물 제거상수 및 제염계수는 원전 내환경기기검증을 위한 방사선환경 평가의 입력으로 제공된다.

• Journal of Radiation Protection and Research
• /
• 제19권1호
• /
• pp.23-35
• /
• 1994

CANDU형 원자력 발전소에서의 유도방출한도를 계산하기 위한 전산 코드 DRL이 개발되었다. DRL 코드에서의 유도방출한도는 CANDU형 원자력 발전소가 정상 가동될 때의 기체 및 액체 방출물에 포함된 방사성 핵종의 방출 허용 기준을 설정하기 위한 것이다. 본 전산 코드는 CSA Standard N288.1-M87에서 권고하고 있는 방법 및 다수 매개 변수를 이용하였고, 월성 원자력 발전소를 대상으로 유도방출한도를 결정하는데 이용되었다.

• 한국지진공학회논문집
• /
• 제20권2호
• /
• pp.125-134
• /
• 2016

In order to improve seismic safety of nuclear power plant (NPP) structures in high seismicity area, seismic isolation system can be adapted. In this study, friction pendulum system (FPS) is used as the seismic isolation system. According to Coulomb's friction theory, friction coefficient is constant regardless of bearing pressure and sliding velocity. However, friction coefficient under actual situation can be changed according to bearing pressure, sliding velocity and temperature. Seismic responses of friction pendulum system with constant friction and various velocity-dependent friction are compared. The velocity-dependent friction coefficients of FPS are varied between low-and fast-velocity friction coefficients according to sliding velocity. From the results of seismic analysis of FPS with various cases of friction coefficient, it can be observed that the yield force of FPS becomes larger as the fast-velocity friction coefficient becomes larger. Also, the displacement response of FPS becomes smaller as the fast-velocity coefficient becomes larger.

• 기술사
• /
• 제44권6호
• /
• pp.40-44
• /
• 2011

Nuclear energy in Korea began in 1958, when the Korea's atomic energy act was formulated and the relevant organizations were founded. Since then, notwithstanding the two catastrophe like TMI and Chernobyl accident, Korea made a wise decision to expand the peaceful uses of the nuclear energy as well as to localize the essential nuclear design technology of fuel and nuclear steam supply system. This decision resulted in the success of export of nuclear power plants as well as research reactor in 2010s. The Korea's nuclear policy, which well utilized 'international crisis in nuclear business' as 'opportunity of Korea to get. nuclear technology', is believed nice policy as a role model of nuclear new-comer countries. Based upon the success story of localization of nuclear technology, Korea had an eye for a niche market, which was a basis of development of SMART, Korea-made integral PWR. The operation of a SMART plant can sufficiently provide not only electricity but also fresh water for 100,000 residents. Last two years, Korea's nuclear industry team led by the Korea Atomic Energy Research Institute completed the standard design of SMART and applied to the Korea's regulatory body for standard design approval. Now the Korea's licensing authority is reviewing the design with the relevant documents, and the design team is doing its best to realize its hope to get the approval by the end of this year. From next year, the SMART business including construction and export will be explored by the KEPCO consortium.

• Nuclear Engineering and Technology
• /
• 제42권4호
• /
• pp.460-467
• /
• 2010

In this study, the parameters of the feedwater control system (FWCS) of the OPR1000 type nuclear power plant (NPP) are optimized by response surface methodology (RSM) in order to acquire better level control performance from the FWCS. The objective of the optimization is to minimize the steam generator (SG) water level deviation from the reference level during transients. The objective functions for this optimization are relationships between the SG level deviation and the parameters of the FWCS. However, in this case of FWCS parameter optimization, the objective functions are not available in the form of analytic equations and the responses (the SG level at plant transients) to inputs (FWCS parameters) can be evaluated by computer simulations only. Classical optimization methods cannot be used because the objective function value cannot be calculated directely. Therefore, the simulation optimization methodology is used and the RSM is adopted as the simulation optimization algorithm. Objective functions are evaluated with several typical transients in NPPs using a system simulation computer code that has been utilized for the system performance analysis of actual NPPs. The results show that the optimized parameters have better SG level control performance. The degree of the SG level deviation from the reference level during transients is minimized and consequently the control performance of the FWCS is remarkably improved.