• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.1848-1853
• /
• 2000

Cause and the elimination method for the chattering phenomena were investigated the check valve attached exit of the auxiliary cooling water pump at a korean nuclear powerplant. From the site experiment and numerical calculation the incident angle of the disk was so small that it was not able to produce the lifting force to overcome the component of disk weight. Moreover, it turned out that the installed position was not symmetric for the secondary vortical flow generated inside the elbow, so that the flow structure had strongly unstable flow characteristics. From this technical support, the tapping noise and the chattering phenomena were eliminated exactly by changing the incidence angle of the valve disk and installed position of the check valve.

• 한국진공학회지
• /
• 제5권4호
• /
• pp.292-300
• /
• 1996

비정질 고체시료에 입사한 이온의 산란과 탄성충돌에 의한 시료원자의 산란을 몬테칼로 방법으로 전산모사 프로그램을 개발하였다. 핵산란은 Kalbitzer와 Oetzmann이 실험적인 검증을 통하여 보정한 만유산란 단면적식을 사용하고, 전자적인 에너지 손실은 Lindhard-Scharff와 Bethe의 공식들을 내삽법으로 적용하였다. 그외의 공식들은 최근에 이르기까지 대부분의 전산모사 프로그램에서 일반적으로 사용하는 방법을 적용하였다. 이온들의 산란형태 및 산란 비거리 등의 결과가 기존의 TRIM과 PIBER 프로그램 결과뿐만 아니라 이미 보고된 실험치와 잘 일치함을 보여 주었다. 또한 프로그램의 사용자 편의를 위하여 Graphic User Interface 방식을 사용하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.581-584
• /
• 2005

Ion beam processing is one of the key technologies to realize mastless and resistless sub 50nm nano fabrication. Unwanted effects, however, may occur since an energetic ion can interact with a target surface in various ways. Depending on the ion energy, the interaction can be swelling, deposition, sputtering, re-deposition, implantation, damage, backscattering and nuclear reaction. Sputtering is the fundamental mechanisms in ion beam induced direct patterning. Re-deposition and backscattering are unwanted mechanisms to avoid. Therefore understanding of ion beam-solid interaction should be advanced for further ion beam related research. In this paper we simulate some important interaction mechanisms between energetic incident ions and solid surfaces and the results are compared with experimental data. The simulation results are agreed well with experimental data.

• Mycobiology
• /
• 제46권4호
• /
• pp.388-395
• /
• 2018

Radionuclides were deposited at forest areas in eastern parts of Japan following the Fukushima Daiichi Nuclear Power Plant incident in March 2011. Ectomycorrhizal (EM) fungi have important effects on radiocaesium dynamics in forest ecosystems. We examined the effect of colonization by the EM fungus Astraeus hygrometricus on the uptake of cesium (Cs) and potassium (K) by Pinus densiflora seedlings. Pine seedlings exhibited enhanced growth after the EM formation due to the colonization by A. hygrometricus. Additionally, the shoot Cs concentration increased after the EM formation when Cs was not added to the medium. This suggests that A. hygrometricus might be able to solubilize Cs fixed to soil particles. Moreover, the shoot K concentration increased significantly after the EM formation when Cs was added. However, there were no significant differences in the root K concentration between EM and non-EM seedlings. These results suggest that different mechanisms control the transfer of Cs and K from the root to the shoot of pine seedlings.

• 환경영향평가
• /
• 제26권6호
• /
• pp.479-494
• /
• 2017

후쿠시마 사태 이후 형성된 원전에 대한 부정적인 여론은 몇몇 국가에서 '탈원전'이라는 정책으로 표출됐다. 한국도 문재인 정부가 들어서면서 원전의 비중을 단계적으로 낮추는 에너지 정책 전환 계획을 발표했다. 이로써 기후변화와 에너지 안보라는 두 가지 문제를 동시에 해결할 주요 에너지원으로 꼽혔던 원전 사용에 제한이 발생했다. 이 연구는 원전의 단계적 폐쇄를 주요 내용으로 하는 에너지 정책 전환 이행과 기후변화체제라는 상황 속에서 2016년부터 2030년까지 한국의 최적전력구성비를 찾는 것이 목적이다. 최적전력구성비는 시간당 전력수요와 INDC를 최소비용으로 만족하는 구성비를 의미한다. 이 연구에서는 선형계획법을 통해 에너지 정책 전환을 이행하는 시나리오와 원전을 2017년 수준으로 유지하는 시나리오로 나누어 비용을 비교분석했다. 그 결과 두 시나리오 모두 풍력은 2018년부터 꾸준히 증가하는 반면 태양광은 2021년부터 경제성을 갖춰 발전량이 대폭 늘어났다. 한편 총 비용은 에너지 전환 시나리오가 약 56조원으로 원전 유지 시나리오에 비해 약 5.5조원 더 비싼 것으로 나타났다.

• Radiation Oncology Journal
• /
• 제1권1호
• /
• pp.11-19
• /
• 1983

Interaction between high energyelectrons and matters had many complex reactions and the high energy electrons lost their energies with collision and scattering, therefore, electrons distribution in matters was shown as various situation by scattering, exciting and ionizing with moleculars. We experimentally studies with 13 MeV Linear Accelerator and thermoluminescence dosimeter using aluminium and Teflon, etc., and measured energy loss of electrons, electron range, electron scattering and dose distribution in matter. We compared the results with theoretical formular, between 4-qw MeV, the energy loss of electrons was decreased by 2 MeV per $1g/cm^2$ but under 1MeV it was rapidly decreased. Electron range in matter reached to $0.5/cm^2$ per 1MeV of incident energy at 6-12MeV. The dose distribution in matter was increased slightly to some depth by total distribution i.e., the combined intensity of primary and secondary radiant and it was rapidly decreased near the maximum range of electrons. Energy loss of electrons and electron range measured by experiment were coincided with theoretical equations of L. Landau and Feather under 5 and 3% errors respectively. The dose distribution of electrons in matter was similar to L.V. Spencer formular, however, we had found that it was quite different in accordance with the field size and that new formular of dose distribution was induced as empirical function contained experimental factors according to field size.

• Nuclear Engineering and Technology
• /
• 제6권4호
• /
• pp.239-247
• /
• 1974

방사선 안전관리의 효과적인 연구를 위해 유사인체 모형을 설계, 제작하였다. 이 모형의 치수는 한국인의 체격과 근사하게 맞추었으며 두께 2.5cm인 포리에칠렌판 35매로 구성되었다. 유사인체모형의 표면에 착용한 열형광 설량계(Disc type TLD)로써 외부 ${\gamma}$-방사선에 의한 신체특정부위의 피폭선량을 측정하였으며, 아울러 깊이에 따른 흡수선량에 대해서 열형광 선량계(micro rod type TLD)로써 측정하여 결정장기 부위의 각단면에 대한 등가선량선을 얻었다. 선량측정은 방사선 작업자의 작업환경조건에 유사하도록 유사인체 모형에 대해 배치하고 여러 입사방항에 대해서 실시하였다. 그 결과 Cs-137, ${\gamma}$-방사선에 대하여 두께 20cm인 유사인체 모형에서의 감쇄는 0.439였으며 이는 보고된 자료들과 잘 일치하였다.

• 공업화학
• /
• 제29권2호
• /
• pp.127-137
• /
• 2018

후쿠시마 다이치 핵발전소의 사고 이후 방사능 오염이 중요한 환경 관심사가 되었다. 원자량 134와 137 세슘은 주요 핵분열 산물이며, 이물질들은 방사능 오염의 주된 문제들이다. 후쿠시마 다이치 핵 발전소 사고에서 다량의 세슘이 방출되었으며, 이 사고의 결과, 많은 연구자들이 방사능-독성 세슘 제거를 위한 흡착제 개발에 집중하였다. 본 총설에서는 세슘 제거를 위하여 각광을 받는 물질로서 청색 안료와 이와 유사한 화합물 제조의 최근 발전 동향을 자세하게 검토하였다. 또한, 다양한 형태의 점토와 점토 기반 흡착제 및 새로 개발된 흡착제를 이용한 세슘 흡착의 최근 연구들을 고찰하였다.

• Nuclear Engineering and Technology
• /
• 제50권1호
• /
• pp.68-79
• /
• 2018

The Ki-Jang research reactor (KJRR), a new research reactor in Korea, is being planned to fulfill multiple purposes. In this study, as an assessment of the environmental radiological impact, we characterized the atmospheric dispersion and deposition of radioactive materials released by an unexpected incident at KJRR using the weather research and forecasting-mesoscale model interface program-California Puff (WRF-MMIF-CALPUFF) model system. Based on the reproduced three-dimensional gridded meteorological data obtained during a 1-year period using WRF, the overall meteorological data predicted by WRF were in agreement with the observed data, while the predicted wind speed data were slightly overestimated at all stations. Based on the CALPUFF simulation of atmospheric dispersion (${\chi}/Q$) and deposition (D/Q) factors, relatively heavier contamination in the vicinity of KJRR was observed, and the prevailing land breeze wind in the study area resulted in relatively higher concentration and deposition in the off-shore area sectors. We also compared the dispersion characteristics between the PAVAN (atmospheric dispersion of radioactive release from nuclear power plants) and CALPUFF models. Finally, the meteorological conditions and possibility of high doses of radiation for relatively higher hourly ${\chi}/Q$ cases were examined at specific discrete receptors.

• Nuclear Engineering and Technology
• /
• 제53권9호
• /
• pp.3026-3034
• /
• 2021

Multi-target X-ray tube is a new type X-ray source, and can be applied in many fields such as sensitive X-ray fluorescence analysis and medical imaging. In this work, we report an electric field modulation multi-target X-ray tube, which contains four targets (Cr, Ni, Au, Mo) coated on a Beryllium (Be) window. A four-valve electric field deflector was developed to deflect the electron beam to bombard the corresponding targets. Particle dynamics analysis software was employed to simulate the particle tracking of electron beam. The results show that the 30 keV electron beam could get a 6.7 mm displacement on the target plane by 10⁵ V/m electric field. The focus areas are about 2 mm × 5 mm and 4 mm × 2.5 mm after deflection in two directions. Thermal behavior calculated by ANSYS shows that the designed target assembly could withstand a 10 W continuous power. The optimum target thicknesses and emission spectra were obtained by Geant4 when the thickness of Be window was 300 mm and the electron beam incident angle was 0.141 rad. The results indicate that this multi-target X-ray tube could provide different X-ray sources effectively.