• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.19 no.1
• /
• pp.61-74
• /
• 2021

A paradigm shift in the government's energy policy was reflected in its declaration of early closure of old nuclear plants as well as cancellation of plans for the construction of new plants. To this end, unit 1 of Kori Nuclear Power Plant was permanently shut down and is set for decommission. Based on these changes, the off-site transport of spent fuels from nuclear power plants has become a critical issue. The purpose of this study is to develop an optimized method for transportation of spent fuels from Kori Nuclear Power Plant's units 1, 2, 3, and 4 to an assumed interim storage facility by simulating the scenarios using the Flexsim software, which is widely used in logistics and manufacturing applications. The results of the simulation suggest that the optimized transport methods may contribute to the development of delivery schedule of spent fuels in the near future. Furthermore, these methods can be applied to decommissioning plan of nuclear power plants.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1384-1386
• /
• 2005

This paper focuses on development of load test simulator of a steam turbine-generator in a nuclear power plant. When load is taken off from electrical power network, it is very difficult to effectively control the steam flow to turbine of the nuclear turbine-generator, because of disturbances, such as electrical load and network unbalance on electrical network. Up to the present time, the conventional control system has been used for the load control on nuclear steam generator, owing to the easy control algorithms and the advantage which have been proven on the nuclear power plant. However, since there are problems with stability control during low power and start-up, only a highly experienced operator can operate during those procedures. Also, a great deal of time and an expensive simulator is needed for the training of an operator. The KEPRI is developed simulator for 600MW nuclear power plant to take a test of generator load rejection, throttle valve, and turbine load control. Total load test is implemented before start up.

• Nuclear Engineering and Technology
• /
• v.36 no.5
• /
• pp.475-484
• /
• 2004

Extending the lifetime of a nuclear power plant [(hereafter referred to simply as NPP)] is one of the most important concerns in the global nuclear industry. Cables are one of the long-life items that have not been considered for replacement during the design life of a NPP. To extend the cable life beyond the design life, it is first necessary to prove that the design life is too conservative compared with actual aging. Condition monitoring is useful means of evaluating the aging condition of cable. In order to simulate natural aging in a nuclear power plant. a study on accelerated aging must first be conducted. In this paper, evaluations of mechanical aging degradation for a neoprene cable jacket were performed after accelerated aging under tcontinuous and intermittent heating conditions. Contrary to general expectations, intermittent heating to the neoprene cable jacket showed low aging degradation, 50% break-elongation, and 60% indenter modulus, compared with continuous heating. With a plant maintenance period of 1 month after every 12 or 18 months operation, we can easily deduce that the life time of the cable jacket of neoprene can be extended much longer than extimated through the general EQ test. which adopts continuous accelerated aging for determining cable life. Therefore, a systematic approach that considers the actual environment conditions of the nuclear power plant is required for determining cable life.

• Nuclear Engineering and Technology
• /
• v.53 no.8
• /
• pp.2591-2599
• /
• 2021

The effect of thermal aging at 475 ℃ and 750 ℃ of Z3CN20.09M cast duplex stainless steel (CDSS) on microstructure, mechanical and intergranular corrosion properties were investigated by transmission electron microscope (TEM), nano indenter, scanning electron microscope (SEM) and corrosion fatigue test system. The result indicated that the spinodal decomposition and G precipitated were occurred after aged at 475 ℃, as well as sigma precipitated at 750 ℃. The microstructure degeneration of ferrite was saturated after aged for 2000h and 200 h at 475 ℃ and 750 ℃ respectively. The mechanical properties, intergranular corrosion resistance and corrosion fatigue lives were continuing deteriorated with increasing the aging time at both temperatures. The difference of the degeneration mechanisms of Z3CN20.09M CDSS aged at 475 ℃ and 750 ℃ was analyzed.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1999.05a
• /
• pp.79-79
• /
• 1999

• Proceedings of the Korean Nuclear Society Conference
• /
• 2002.10a
• /
• pp.84.2-84
• /
• 2002

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.124.2-124.2
• /
• 2010

Generally, a coolant of the nuclear power plant is manufactured by electrolyzing the sea water near the plant for making the sodium hypochlorite(NaOCl), which is used for sterilizing the bacteria and the shellfishes sticking to the drains or the pumps at the outlet of the cooling system due to $8-10^{\circ}C$ warmer temperature than the inlet sea water. During manufacturing the sodium hypochlorite, the hydrogen with the high purity is also produced at the anode side of the electrolyzer. This paper describes a novel power plant system combined with the polymer electrolyte membrane(PEM) fuel cell, the wasted hydrogen from the sea water electrolyzer and the wasted heat of the nuclear power plant. The present status over the exhausted hydrogen at twenty nuclear power plants in Korea was investigated in this study, from which an available power generation is estimated. Furthermore, the economic feasibility of the PEM fuel cell power plant is also evaluated by a current regulations over the power production and exchange using a renewable energy shown in Korea Power Exchange(KRX).

• Journal of the Korean Society of Safety
• /
• v.28 no.3
• /
• pp.95-99
• /
• 2013

The goal of this study was to investigate some significant factors to influence level of safety at plant construction field and analyze degree of risk by work classification. Currently, there are lots of construction fields for the nuclear power plant for electricity generation, and our government also planned constructing more nuclear power plant in near future. However, much of the safety literature neglected the degree of risk factors on the plant construction field. Safety managers participated in the brainstorming session for drawing decision criteria of the degree of risk (i.e., significant factors). Then, they were asked to answer a structured questionnaire which was developed for drawing most important factors. Finally, the analytic hierarchy process (AHP) was used to analyze level of risk by work classification. The following results were obtained. First, total twelve factors judging degree of risk were found in the brainstorming session. Second, the questionnaire showed four significant factors, including number of workers, working environments, skill of craft and accident experience. Third, the results of AHP showed Architecture work is the most dangerous work among 6 work types. The results could be used to reduce degree of risk in construction field of the nuclear power plant.

• Journal of Digital Convergence
• /
• v.11 no.10
• /
• pp.287-294
• /
• 2013

This study were proposed for the promotion policy on public confidence in nuclear power recovery schemes. To this end, the existing survey and secondary data review and public distrust of nuclear power plant safety issues were raised. In addition, the meta-analysis data were analyzed by using. Promote public confidence in nuclear power plants recovered three major policy presented. First, the nuclear power plant for the economical / safety communication strategy, short term / long term in terms proposed. Second, strengthen the nuclear power plant reliability and short-term communication strategy / long term in terms proposed. Finally, Korea Hydro & Nuclear Power's long-term image building measures proposed. The results of this study Korea's nuclear power plants to increase confidence in the effect is expected to be presented.

• Nuclear Engineering and Technology
• /
• v.48 no.1
• /
• pp.144-152
• /
• 2016

Human capabilities, such as technical/nontechnical skills, have begun to be recognized as crucial factors for nuclear safety. One of the most common ways to improve human capabilities in general is training. The nuclear industry has constantly developed and used training as a tool to increase plant efficiency and safety. An integrated training framework was suggested for one of those efforts, especially during simulation training sessions of nuclear power plant operation teams. The developed training evaluation methods are based on measuring the levels of situation awareness of teams in terms of the level of shared confidence and consensus as well as the accuracy of team situation awareness. Verification of the developed methods was conducted by analyzing the training data of real nuclear power plant operation teams. The teams that achieved higher level of shared confidence showed better performance in solving problem situations when coupled with high consensus index values. The accuracy of nuclear power plant operation teams' situation awareness was approximately the same or showed a similar trend as that of senior reactor operators' situation awareness calculated by a situation awareness accuracy index (SAAI). Teams that had higher SAAI values performed better and faster than those that had lower SAAI values.