• Nuclear Engineering and Technology
• /
• 제53권12호
• /
• pp.4052-4059
• /
• 2021

The microstructure of the fuel pellet plays an essential role in fission gas buildup and release and is critical for the safe and continued operation of nuclear power stations. Structural analysis of uranium dioxide (UO₂)-molybdenum (Mo) composite fuel pellets prepared at a range of sintering temperatures from 1300 to 1800 ℃ was performed. Mo micro and nanoparticles were used in making the composite pellets. A systematic investigation into the influence of processing parameters during Spark Plasma Sintering (SPS) of the pellets on the microstructure, texture, grain size, and grain boundary characters of UO₂-Mo is presented. UO₂-Mo composite show significant differences in the fraction of general boundaries and also special/coincident site lattice (CSL) boundaries. EBSD orientation maps demonstrated that <111> texturing was observed in the pellets fabricated at 1500 ℃. The experimental investigations suggest that UO₂-Mo composite pellets have favorable microstructural features compared to the UO₂ pellet.

• Nuclear Engineering and Technology
• /
• 제54권1호
• /
• pp.11-18
• /
• 2022

In this research, curium oxide (CmO₂) is studied as fuel for VVER-1200 reactor to get an attention to its energy value and possibilities. For this purpose, CmO₂ is used in fuel rods or integrated burnable absorber (IBA) rods with and without UO₂ and then compared with the conventional fuel assembly of VVER-1200 reactor. It is burned to 60 GWd/t by using SRAC-2006 code and JENDL-4.0 data library. From these studies, it is found that CmO₂ is competent like UO₂ as a fuel due to higher fission cross-section of ²⁴³Cm and ²⁴⁵Cm isotopes and neutron capture cross-section of ²⁴⁴Cm and ²⁴⁶Cm isotopes. As a result, when some or all of the UO₂ of fuel rods or IBA rods are replaced by CmO₂, we get a similar k-inf like the reference even with lower enrichment UO₂ fuels. These studies show that the use of CmO₂ as IBA rods is more effective than the fuel rods considering the initially loaded amount, power peaking factor (PPF), fuel temperature and void coefficient, and the quality of spent fuel. From a detailed study, 3% CmO₂ with inert material ZrO₂ in IBA rods are recommended for the VVER-1200 reactor assembly from the once through concept.

• Nuclear Engineering and Technology
• /
• 제53권7호
• /
• pp.2095-2103
• /
• 2021

A small power ADS design using thorium oxide and diluent matrix reprocessed fuel is proposed for a high transmutation rate, small reactivity swing, and strong safety features. Two fuel matrices (CERCER and CERMET) and different recycled fuel compositions recovered from UO₂ spent fuels with 45 GWd/tU and 60 GWd/tU burnup were investigated to determine the suitable fuel for the ADS. It was found that the transmutation of each isotope depends on TRU initial loading amount. After examining the cores, the results show that CERCER fueled ADS has a negative coolant void reactivity (CVR) and a smaller radiotoxicity at discharge compared to that of CERMET core. It implies that CERCER fuel has enhanced safety features and more flavor in terms of radiotoxicity management. To increase fuel utilization and core operation efficiency, a simple assembly shuffling pattern for the CERCER fueled ADS is also proposed. Eigenvalue and burnup calculations were conducted using Serpent 2 with ENDF/B-VII.0 library in both kcode and external source modes, and it indicates that the results of transmutation analyses obtained by kcode only is reliable to discuss the transmutation potential of ADS. Burnup calculation with the fixed-source mode is essential to be used for more practical results of the transmutation by ADS.

• 방사성폐기물학회지
• /
• 제20권4호
• /
• pp.469-488
• /
• 2022

Technology for high-level-waste disposal employing a multibarrier concept using engineered and natural barrier in stable bedrock at 300-1,000 m depth is being commercialized as a safe, long-term isolation method for high-level waste, including spent nuclear fuel. Managing heat generated from waste is important for improving disposal efficiency; thus, research on efficient heat management is required. In this study, thermal management methods to maximize disposal efficiency in terms of the disposal area required were developed. They efficiently use the land in an environment, such as Korea, where the land area is small and the amount of waste is large. The thermal effects of engineered barriers and natural barriers in a high-level waste disposal repository were analyzed. The research status of thermal management for the main bedrocks of the repository, such as crystalline, clay, salt, and other rocks, were reviewed. Based on a characteristics analysis of various heat management approaches, the spent nuclear fuel cooling time, buffer bentonite thermal conductivity, and disposal container size were chosen as efficient heat management methods applicable in Korea. For each method, thermal analyses of the disposal repository were performed. Based on the results, the disposal efficiency was evaluated preliminarily. Necessary future research is suggested.

• Nuclear Engineering and Technology
• /
• 제54권11호
• /
• pp.4084-4094
• /
• 2022

The Advanced Fuels Campaign Fission Accelerated Steady-state Test (FAST) at Idaho National Laboratory (INL) completed its first irradiation cycle within the Advanced Test Reactor (ATR). The test focused on the irradiation of alloy fuel forms for use in sodium fast reactors. The first cycle of FAST testing was completed and four rodlets were removed for the initial post irradiation examination (PIE). The rodlet design and irradiation conditions were evaluated using Monte Carlo N-Particle (MCNP) for as-run power history and COMSOL for temperature analysis. These rodlets include a set of low burnups (~2.5 % fissions per initial metal atoms [%FIMA]), control rodlets, and a helium-bonded annular rodlet (4.7 %FIMA). Nondestructive PIE has been completed and includes visual inspection, neutron radiography and gamma scanning of the FAST capsules and rodlets. Radiography confirmed the integrity of the experiments, revealed that the annulus in the annular fuel was filled at a modest burnup (4.7 %FIMA), and indicated potential slumping of the cooler rodlets at lower burnup. Precision gamma scanning indicated mostly usual fission product behavior, except for cesium in the He-bonded annular fuel. Future destructive PIE will be necessary to fully interpret the effects of accelerated irradiation on U-Zr metallic fuel behavior.

• Nuclear Engineering and Technology
• /
• 제54권12호
• /
• pp.4499-4513
• /
• 2022

Spent fuel behavior of dry storage was simulated in a continuous state from steady-state operation by modifying FRAPCON-4.0 to incorporate spent fuel-specific fuel behavior models. Spent fuel behavior of a typical PWR was compared with that of NuScale Power Module (NPM^TM). Current PWR discharge burnup (60 MWd/kgU) gives a sufficient margin to the hoop stress limit of 90 MPa. Most hydrogen precipitation occurs in the first 50 years of dry storage, thereby no extra phenomenological safety factor is identified for extended dry storage up to 100 years. Regulation for spent fuel management can be significantly alleviated for LWR-based SMRs. Hydride embrittlement safety criterion is irrelevant to NuScale spent fuels; they have sufficiently lower plenum pressure and hydrogen contents compared to those of PWRs. Cladding creep out during dry storage reduces the subchannel area with burnup. The most deformed cladding outer diameter after 100 years of dry storage is found to be 9.64 mm for discharge burnup of 70 MWd/kgU. It may deteriorate heat transfer of dry storage by increasing flow resistance and decreasing the view factor of radiative heat transfer. Self-regulated by decreasing rod internal pressure with opening gap, cladding creep out closely reaches the saturated point after ~50 years of dry storage.

• Nuclear Engineering and Technology
• /
• 제55권12호
• /
• pp.4647-4658
• /
• 2023

In this paper, elastic-plastic fracture mechanics analysis is performed to determine the critical crack sizes of the multipurpose canister (MPC) manufactured using austenitic stainless steel under dynamic loading conditions that simulate drop accidents. Firstly, dynamic finite element (FE) analysis is performed using Abaqus v.2018 with the KORAD (Korea Radioactive Waste Agency)-21 model under two drop accident conditions. Through the FE analysis, critical locations and through-thickness stress distributions in the MPC are identified, where the maximum plastic strain occurs during impact loadings. Then, the evaluation using the failure assessment diagram (FAD) is performed by postulating an external surface crack at the critical location to determine the critical crack depth. It is found that, for the drop cases considered in this paper, the principal failure mechanism for the circumferential surface crack is found to be the plastic collapse due to dominant high bending axial stress in the thickness. For axial cracks, the plastic collapse is also the dominant failure mechanism due to high membrane hoop stress, followed by the ductile tearing analysis. When incorporating the strain rate effect on yield strength and fracture toughness, the critical crack depth increases from 10 to 20%.

• 방사성폐기물학회지
• /
• 제11권4호
• /
• pp.333-349
• /
• 2013

최근 국내에서도 원전 부지 내에 건설된 습식저장조의 용량이 곧 포화될 것으로 예상되어 사용후핵연료의 건식저장에 관한 논의가 활발하다. 이 논문에서는 앞으로 다양하게 논의될 저장시스템의 안전성과 함께 장기 건식저장 시 발생하는 사용후핵연료의 특성 및 건전성 변화에 대해 이제까지 국내외에서 연구 보고된 내용들을 면밀히 검토하고 향후 추구해야 할 연구방향을 제시하고자 하였다. 조사 결과 건식저장 기간 동안 진행될 수 있는 여러 피복관 열화기구 중에서 가장 대표적인 기구는 크립 변형과 수소화물에 의한 영향이었으며, 이들이 사용후핵연료 장기 건식저장 시 규제기술기준의 주요 근간을 이루고 있는 것으로 분석되었다. 한편 과거에는 피복관의 크립 변형이 가장 중요한 열화기구로 평가되었으나, 최근의 연구 결과를 통해 수소화물에 의한 영향이 더 심각한 것으로 드러났고 이는 미국의 규제기준과 새로운 온도 범위를 제시하고 있는 일본의 규제기준에서 확인할 수 있었다. 그러나, 아직까지 수소화물에 의한 영향이 발생하는 응력과 온도 조건을 명확히 규명할 수 있는 연구 자료가 충분하지 못하며, 나아가 사용후핵연료의 취급 시 거동에 대한 연구도 지속적으로 수행해야 할 부분으로 드러났다. 따라서 국내 사용후핵연료 특성에 맞는 건식저장조건을 수립하기 위해서는 국내에서도 본격적인 연구를 통해 이들 자료에 대한 충분한 생산과 평가 및 분석이 뒤따라야 할 것으로 판단된다.

• 한국전산구조공학회논문집
• /
• 제15권3호
• /
• pp.471-480
• /
• 2002

본 논문에서는 가압경수로(PWR) 고준위폐기물을 깊은 지하 500 m에 처분 시 사용되는 처분용기의 기본 구조설계에 필요한 처분용기 구조물에 대한 열응력 해석을 수행하였다. 일반적으로 고준위폐기물 처분용기는 지하 수백 미터에 위치하는 화강암 등의 암반 내에 설치하게 되는데, 이 때 처분용기는 내부 바스켓에 채워진 사용 후 핵연료다발의 높은 온도에 따른 열발생에 의하여 내부 주철삽입물 및 외곽쉘에 발생하는 열응력에 견디어야 한다. 따라서 본 논문에서는 처분용기 내부의 핵연료 다발의 열발생을 고려한 열응력 해석을 수행하였다 해석 방법은 유한요소법을 사용하였다. 직접 유한요소해석코드를 작성하는 대신에 구조물의 복잡성 및 유한요소개수의 많음을 고려하여, 상용 유한요소해석 코드인 NISA프로그램을 이용하여 열응력 해석을 수행하였다 해석 결과 처분용기에 가해지는 심지층 지하수압 및 벤토 나이트 버퍼의 팽윤압에 추가하여, 고온의 내부 핵연료다발에 의한 열하중이 작용하더라도 처분용기의 내부 주철삽입물에 발생하는 응력은 주철의 항복응력 보다 여전히 작아 처분용기는 구조적으로 안전함이 확인되었다

• 방사성폐기물학회지
• /
• 제8권3호
• /
• pp.239-245
• /
• 2010

2009년말 기준으로 11,811 다발의 경수로 사용후핵연료가 방출되었으며, 지금까지 각 사용후핵연료에 대해 방사선원항을 가중하여 설계에 반영하기는 사실상 불가능하여, 원자력 관련시설 설계시 보수성을 갖는 기준 사용후핵연료를 선정하고 이를 바탕으로 시스템 설계를 수행하여 왔다. 방사선원항에 대한 단순모델을 적용하면 각 사용후핵연료에 대한 방사선원항을 가중함으로써 이와 같은 보수성을 배제할 수 있으므로 본 연구에서 웨스팅하우스형 원전에 사용된 사용후핵연료를 대상으로 방사선원항, 즉, 붕괴열, 방사능세기, 섭취위해도 등을 예측하기 위한 회귀모형을 개발하였다. 개발된 회귀식을 통해 예측된 방사선원항값은 ORIGEN-ARP 코드로 계산된 값과 약 5% 이내에서 잘 일치함을 확인하였으며, 이의 유용성을 검토한 결과 각각의 사용후핵연료에 대한 방사선원항을 가중하여 설계에 반영하면 보수성을 줄일 수 있음을 확인하였다. 따라서 본 연구에서 개발된 회귀식은 사용후핵연료의 저장 및 처분과 관련한 원자력시설 설계시 개념설계 단계에서 유용하게 사용될 수 있을 것으로 판단된다.