• 태양에너지
• /
• 제15권3호
• /
• pp.105-117
• /
• 1995

본 연구소에서는 Furan foundry sand 유동층내에 Spiral coil tube를 설치하여 유동입자, 유동층내 온도, 유동율, 전열 관의 Pitch와 직경 비(p/Do) 및 전열 관의 Pitch와 유동입자의 크기의 비(p/dp) 등이 전열 관 표면 열 전달계수(ho)에 미치는 영향을 실험적으로 연구하고, 또한 최대 $Nu_{max}$수를 여러 변수들의 관계로 나타내었다. 전열 관 표면 열 전달계수는 유동층내 온도가 높아 질 수록, 유동율이 커질수록 증가한다. 그러나 유동입자의 크기가 커지면 열 전달계수는 감소한다. 전열 관의 Pitch와 직경 비(p/Do)와의 관계에서 p/Do=4.75일 때 가장 높은 열 전달계수를 얻었으며, 유동층내 온도가 상승하고, Re 수가 증가할 수록 p/Do=1.58일 때보다 p/Do=4.75일때가 Nu수의 증가율은 다소 감소하는 경향을 보였다. 또한 p/dp의 비가 클 경우 낮은 온도($75^{\circ}C$)에서, p/dp의 비가 작을 경우는 높은 온도($550^{\circ}C$)에서 열 전달 효과가 큰 것으로 나타났다. 본 실험범위에서 최대 $Nu_{max}$ 수와 Re 수, Prg 수, p/dp 및 p/Do의 관계를 무차원 식으로 다음과 같이 나타낼 수 있었다. $$Nu_{max}=1.01\;Re^{0.48}Prg^{0.4}(p/dp)^{0.28}(p/Do)^{0.05}$$.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.574-580
• /
• 2009

This study is investigate the bending behavior of real size RC beams strengthened with carbon fiber sheets. For experimental study, 1 control beam and 8 strengthened beams of real size(4 NU-beams and 4 U-beams) are tested and compared. NU-beam has not a V-shaped band and V-beam has a V-shaped band. The variables of experiment are composed of the number of carbon fiber sheets, the existence of U-shaped band, and four point loading, etc. The experimental results showed that the strengthening system with U-shaped band controls the premature debonding and provides a more ductile failure mode than the strengthening system without V-shaped band. It can be found from the load-deflection curves that as the number of fiber sheets is increased, the maximum strength and the flexural rigidity is increased. For the strengthening method with carbon fiber sheets of the real size RC beams, it is required the finding a solution to the bonding problem.

• 대한기계학회논문집
• /
• 제16권8호
• /
• pp.1566-1574
• /
• 1992

본 연구에서는 원형수직 충돌분류에 의한 가열평판의 전열특성을 해석하기 위 하여 최근 표면온도 측정에 많이 사용되고 있는 liquid crystal을 이용하였다. 즉 liquid crystal의 감온특성과 영상처리 기법을 이용하여 레이놀즈수 및 노즐과 충돌판 사이의 거리(L/D) 변화에 따른 전열면의 온도장 변화를 측정하였다.

• International journal of advanced smart convergence
• /
• 제8권1호
• /
• pp.184-195
• /
• 2019

This study investigates the hair restoration efficacy of selected radish saponin extracts on nude mice. Nude mice genetically predisposed to pattern balding were used in this study. Our study revealed the underlying mechanism of stimulating hair growth in athymic nude mice by repair the nu/nu follicular keratin differentiation defect. Thus, the topical application of radish saponin may represent a novel strategy for the management and therapy of certain forms of alopecia. The term of hair density of PEE treated nude mice were significantly increase as compared with of control nude mice. Histological observation of skin sample showed no hair follicle or only distorted hair follicles were observed in the control samples, in contrast, by the PEE treatment groups showed a fully formed and increased the number of hair follicles up to three times higher than that of control group in terms of the number of hair follicles in nude mouse skin.PEE treated mice the number of BrdU-labeled keratinocytes per anagen follicle increased significantly, especially in the follicular bulbs and outer root sheath compared with the control mice. Moreover, PEE-treated nude mice also exhibited a significant increase in the number of BrdU-labeled epidermal keratinocyte proliferation.

• Nuclear Engineering and Technology
• /
• 제55권6호
• /
• pp.2125-2138
• /
• 2023

The printed circuit heat exchanger (PCHE) with airfoil fins has the benefits of high compactness, high efficiency and superior heat transfer performance. A novel multi-objective optimization approach is presented to design the airfoil fin PCHE in this paper. Three optimization design variables (the vertical number, the horizontal number and the staggered number) are obtained by means of dimensionless airfoil fin arrangement parameters. And the optimization objective is to maximize the Nusselt number (Nu) and minimize the Fanning friction factor (f). Firstly, in order to investigate the impact of design variables on the thermal-hydraulic performance, a parametric study via the design of experiments is proposed. Subsequently, the relationships between three optimization design variables and two objective functions (Nu and f) are characterized by an improved particle swarm optimization-backpropagation artificial neural network. Finally, a multi-objective optimization is used to construct the Pareto optimal front, in which the non-dominated sorting genetic algorithm II is used. The comprehensive performance is found to be the best when the airfoil fins are completely staggered arrangement. And the best compromise solution based on the TOPSIS method is identified as the optimal solution, which can achieve the requirement of high heat transfer performance and low flow resistance.

• 대한기계학회논문집B
• /
• 제36권5호
• /
• pp.477-485
• /
• 2012

수평 덕트 내 임계점부근의 유체 유동 및 열전달특성은 중력과 함께 임계영역에서의 열역학 및 전달 물성치의 많은 변화와 직접적으로 연관되어 있다. 본 연구에서는 수평 직사각 덕트 내 임계점부근의 물에 대한 대류열전달특성을 전산해석을 통하여 분석하였다. 이를 통해 국부적인 열전달계수와 유속, 온도, 그리고 물성치분포를 포함한 대류열전달특성에 대해 임계점 근접효과와 함께 비교하였다. 벽으로부터의 열전달에 따른 유체 밀도감소로 덕트 내 유동방향으로의 유속증가와 함께 유체가 액체에서 기체 같은 상태로 천이하는 형태의 유동장특성을 보여준다. 덕트의 윗면, 옆면, 그리고 아래면 각각의 국부적인 열전달계수분포에 큰 차이가 있으며 준임계점 온도부근에서 난류전달특성의 향상으로 열전달계수의 최대치에 이르게 된다. Nu 수는 덕트 내 압력과 종횡비에 영향을 받으며 임계압에 가까워질수록 최대 Nu 수는 급격히 증가하게 된다. 이와 함께 기존의 열전달상관식을 통한 결과와 예측된 Nu 수 분포를 비교하였다.

• Journal of Mechanical Science and Technology
• /
• 제17권10호
• /
• pp.1520-1532
• /
• 2003

An experiment was performed to obtain the local heat transfer coefficient and Nusselt number in a circular duct with a 180$^{\circ}$ bend for Re=6 x 10$^4$, 8 x 10$^4$ and 1 x 10$\^$5/ under swirling flow and non-swirling flow conditions. The test tube with a circular section was made from stainless steel having a curvature ration of 9.4. Current heat flux of 5.11 kW/㎡ was applied to the test tube by electrical power and the swirling motion of air was produced by a tangential inlet to the pipe axis at 180$^{\circ}$. Measurements of local wall temperatures and the bulk mean temperatures of air were made at four circumferential positions at 16 stations. The wall temperatures showed a reduced distribution curve at the bend for the non-swirling flow, but this effect did not appear for the swirling flow. The Nusselt number distributions for the swirling flow, which was calculated from the measured wall and the bulk temperatures, were higher than that of the non-swirling flow. The average Nusselt number of the swirling flow increased by about 90-100%, compared to that of the non-swirling flow. The Nu/Nu$\_$DB/ values at the 90$^{\circ}$ station for non-swirling flow and swirling flow were approximately 2.5 and 4.8 at Re=6x10$^4$ respectively. The values agree well with Said's results for non-swirling flow.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.634-639
• /
• 2003

It has been studied the flow near a rotating disk with surface topography. The system Ekman number is assumed very small, i.e., $E[{\equiv}\frac{\nu}{{\Omega}^{\ast}L^{\ast2}}]<<1$ in which $L^{\ast}$ denotes a disk radius, ${\nu}$ kinematic viscosity of the fluid and ${\Omega}^{\ast}$ angular velocity of the basic state. Disk surface has a sinusoidal topographic variation along radial coordinate, i.e., $z={\delta}cos(2{\pi}{\omega}r)$, where ${\delta}$ and ${\omega}$ are, respectively, nondimensional amplitude and wave number of the disk surface. Analytic solutions, being useful over the parametric ranges of ${\delta}{\sim}O$( $E^{1/2}$ ) and ${\omega}{\leq}O$ ( $E^{1/2}$ ), are secured in a series-function form of Fourier-Bessel type. An asymptotic behavior, when $E{\rightarrow}0$, is clarified as : for a disk with surface roughness, in contrast to the case of a flat disk, the azimuthal velocity increases in magnitude, together with the thickening boundary layer. The radial velocity, however, decreases in magnitude as the amplitude of surface waviness increases. Consequently, the overall Ekman pumping at the edge of the boundary layer remains unchanged, maintaining the constant value equal to that of the flat disk.

• 천문학회보
• /
• 제40권1호
• /
• pp.44.1-44.1
• /
• 2015

We present joint constraints on the number of effective neutrino species $N_{eff}$ and the sum of neutrino masses ${\Sigma}m_{\nu}$, based on a technique which exploits the full information contained in the one-dimensional Lyman-${\alpha}$ forest flux power spectrum, complemented by additional cosmological probes. In particular, we obtain $N_{eff}=2.91{\pm}0.22$ (95% CL) and ${\Sigma}m_{\nu}$ < 0.15 eV (95% CL) when we combine BOSS Lyman-${\alpha}$ forest data with CMB (Planck+ACT+SPT+WMAP polarization) measurements, and $N_{eff}=2.88{\pm}0.20$ (95% CL) and ${Sigma}m_{\nu}$ < 0.14 eV (95% CL) when we further add baryon acoustic oscillations. Our results tend to favor the normal hierarchy scenario for the masses of the active neutrino species, provide strong evidence for the Cosmic Neutrino Background from $N_{eff}{\approx}3$($N_{eff}=0$ is rejected at more than $14{\sigma}$), and rule out the possibility of a sterile neutrino thermalized with active neutrinos (i.e., $N_{eff}=4$) - or more generally any decoupled relativistic relic with $${\Delta}N_{eff}{\sim_=}1$$ - at a significance of over $5{\sigma}$, the strongest bound to date, implying that there is no need for exotic neutrino physics in the concordance ${\Lambda}CDM$ model.

• 항공우주기술
• /
• 제2권2호
• /
• pp.142-150
• /
• 2003

가열벽이 있는 4각단면 채널에서 3차원 열전달이 비선형 k-ε-fμ 모형과 큰에디모사법을 이용하여 해석되었다. 4각단면 채널로 모형화된 열량계 해석에 비선형 k-ε-fμ 모형과 비선형 열유속모형이 도입되었다. 레이놀즈수는 4000≤$Re_b$≤20000로 변화되었다. 난류의 비등방성으로 유도되는 구석와류는 주 유동속도의 1~3% 정도로 크지 않았지만 열전달에 커다란 영향을 주었다. 또한 채널 단면에 존재하는 나선형의 와류에 의해서 열전달이 심하게 변함을 보여 주었다. 예측된 열전달계수로부터 Nu~$Re^{0.8}Pr^{0.34}$가 검토되었고 온도의 섭동과 와유동의 비정상거동이 조사되었다.