Browse > Article

An Investigation of Heat Transfer Characteristics of Swirling Flow in a 180$^{\circ}$ Circular Section Bend with Uniform Heat Flux  

Chang, Tae-Hyun (Division of Mechanical and Automation Engineering, Kyungnam University)
Publication Information
Journal of Mechanical Science and Technology / v.17, no.10, 2003 , pp. 1520-1532 More about this Journal
Abstract
An experiment was performed to obtain the local heat transfer coefficient and Nusselt number in a circular duct with a 180$^{\circ}$ bend for Re=6 x 10$^4$, 8 x 10$^4$ and 1 x 10$\^$5/ under swirling flow and non-swirling flow conditions. The test tube with a circular section was made from stainless steel having a curvature ration of 9.4. Current heat flux of 5.11 kW/㎡ was applied to the test tube by electrical power and the swirling motion of air was produced by a tangential inlet to the pipe axis at 180$^{\circ}$. Measurements of local wall temperatures and the bulk mean temperatures of air were made at four circumferential positions at 16 stations. The wall temperatures showed a reduced distribution curve at the bend for the non-swirling flow, but this effect did not appear for the swirling flow. The Nusselt number distributions for the swirling flow, which was calculated from the measured wall and the bulk temperatures, were higher than that of the non-swirling flow. The average Nusselt number of the swirling flow increased by about 90-100%, compared to that of the non-swirling flow. The Nu/Nu$\_$DB/ values at the 90$^{\circ}$ station for non-swirling flow and swirling flow were approximately 2.5 and 4.8 at Re=6x10$^4$ respectively. The values agree well with Said's results for non-swirling flow.
Keywords
Swirling Flow; Non Swirling Flow; Swirl Chamber; Swirl Generator; Wall Temperature; Bulk Temperature; Uniform Heating;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 Baughm, J. W., Lacovides, H., Jackson, D. C. and Launder, B. E., 1987, 'Local Heat Transfer Measurements in Turbulent Flow Around a 180-Deg Pipe Bend,' Journal of Heat Transfer, Vol. 109, pp. 43-48
2 Ito, H., 1960, 'Pressure Losses in Smooth Pipe Bends,' Journal of Basic Engineering, pp. 131-139
3 Chang, S. M., Humphrey, J. A. and Modavi, A., 1988, 'Turbulent Flow in Strongly Curved U-bend and Downstream Tangent of Square Cross Section,' PCH Physico Chemical Hydrodynamic, Vol. 4, pp.243-253
4 Enayet, M. M., Gibson, M. M., Taylor, A. M., K. P. and Yiannekis, M., 1982, 'Laser-Doppler Measurements of Laminar and Turbulent Flow in a Pipe Bend,' Int. J. Heat & Fluid Flow, Vol. 3, No. 4, pp. 213-220   DOI   ScienceOn
5 Medwell, J. O.,Chang, T. H. and Kwon, S. S., 1989, 'A Study of Swirling Flow in a Cylindrical Tube,' Korean J. of Air-Conditioning and Refrigeration Engineering, Vol. 1, No. 4, pp. 265-275
6 Kays, W. M. and Crawford, M. E., 1980, Convective Heat Transfer, Second Edition, McGraw Hill
7 Mullin, T. and Greated, C. A., 1980, 'Oscillatory Flow in a Curved Pipe, Part 1 :The Developing Flow Case,' J. Fluid Mech., Vol. 98, pp. 383-395   DOI   ScienceOn
8 Richard W. Johnson, 1988, 'Numerical Simulation of Local Nusselts Number for Turbulent Flow in a Square Duct with a 180 Degree Bend,' Numerical Heat Transfer, Vol. 13, pp. 205-228   DOI   ScienceOn
9 Tae Hyun Chang and Hee Young Kim, 2001, 'A Investigation of Swirling Flow in a Cylindrical Tube,' KSME Internationnal Journal, Vol. 15, No. 12, pp. 1892-1899   과학기술학회마을
10 Said Dini, Nader Saniei and Daniel Bartlett, 1992, 'Use of Liquid Crystal for Local Heat Transfer Coefficient Measurement Around a 180 Degree Bend,' ASME, HTD, Vol. 210, pp. 107-114
11 Talbot, L., 1954, 'Laminar Swirl Flow,' J. of Applied Mechanics, ASME, Vol. 21, pp. 1-7
12 Metha, N. D. and Bell, K. J., 1981, 'Laminar Flow Heat Transfer,' Soviet Research, Vol. 103, No. 6, pp. 71-80
13 Thomson, J., 1876, 'On the Origin of Winding of River in Alluvial Planic, with Remarks on the Flow of Water Pound Bend in Pipe,' duroc. K. Soc. London Ser, A25, pp. 5-8