• Journal of Animal Environmental Science
• /
• v.16 no.3
• /
• pp.215-226
• /
• 2010

The pig slurry leachate was dark brown-colored solution that leaches out of woodchip trickling filter. The purpose of this research was to investigate the effect of pig slurry leachate and byproduct on growth characteristics of leaf lettuce in hydroponics culture. The effects of addition of fish meal, bone meal and crab shell for the growth of leaf lettuce were investigated. Leaf lettuce were grown in each of six combination treatment solutions; slurry leachate, slurry leachate + fish meal, slurry leachate+bone meal, slurry leachate + crab shell and chemical hydroponic solution for lettuce based on EC content. The chemical nutrient solution was the solution of National Horticulture Research Station for the growth of lettuce. The all of nutrient solution was adjusted 1.5 mS/cm in EC in hydroponics culture. 1. The pH level of leachate of trickling filter was increased and EC decreased gradually during treatment. Pig slurry leachate was low in suspended solids (SS), phosphorus (P), but rich in potassium (K). 2. The plot of slurry leachate (SL) was lowest in the growth characteristics of lettuce. The leaf length and width of lettuce treated with mixture plot of slurry leachate and fish meal (SL + FM) was higher compared with plot in slurry leachate. The chlorophyll reading was reduced in plot treated with slurry leachate, but that in plot of SL+FM was similar compared with control plot. 3. The fresh weight of lettuce showed lowest in the plot treated with slurry leachate. The addition of fish meal increased the yield of comparing plot of slurry leachate, but plots of bone meal and crab shell addition were not significantly difference. The fresh weight of leaf lettuce in plot of SL+FM was 87% as 400.0g compared with control. In conclusion, the mixture solution of pig slurry leachate and fish meal could be used as a nutrition solution of organic lettuce hydroponics.

• Journal of Animal Environmental Science
• /
• v.16 no.1
• /
• pp.51-60
• /
• 2010

This experiment was conducted to investigate the effects of concentrated pig slurry separated from membrane filter and by environment-friendly agro-materials mixtures on growth of lettuce in hydroponics. The swine waste treatment system having a ultra filtration and a reverse osmosis process was designed in this study. Filtration of pig slurry was necessary to prevent the hose clogging in hydroponics. Primary separation using ultra filter was followed by concentration by RO (Reverse Osmosis). The concentrated pig slurry (CS) was mixed by five different environment-friendly agro-materials mixtures. The chemical nutrient solution was the solution of National Horticulture Research Station for the growth of lettuce. The concentration of nutrient solution in hydroponics was adjusted a range of 1.5 mS/cm in EC. The concentrated pig slurry was low in phosphorus(P), suspended solid and heavy matal, but rich in potassium (K). The concentrated slurry was lowest in the growth characteristics of leaf lettuce. And also SPAD value in leaf was reduced in plot treated with concentrated slurry. But the growth of lettuce in the mixtures plot (CS+BM+AA, CS+BM+AA+SW) in hydroponics was significantly high compared to concentrated slurry. The fresh yield of lettuce was 78, 84% that of nutrient solution as 131.9, 142.2g in plot of CS+BM+AA and CS+BM+AA+SW, respectively. Our studies have shown that it is possible to produce organic culture using concentrated slurry and environment-friendly agro-materials mixture, although growth is slower than when using a conventional inorganic hydroponic solution.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.2
• /
• pp.101-108
• /
• 2019

This study is analysis of the utilization as a concrete fine aggregate on CGS, a by-product of Integrated coal gasification combined cycle(IGCC). That is, in KS F 2527 "Concrete aggregate," properties of 1~12times to CGS were evaluated, focusing on quality items corresponding to natural aggregate sand(NS) and melted slag aggregate sand(MS). As a result, the distribution of grain shape, safety and expansion were all satisfied with KS standards by physical properties, but the quality was unstable at 7~12times of water absorption ratio and absolute dry density. The particle size distribution was unstable due to asymmetry distribution of coarse particles, and particles were too thick for 7~12times. The passing ratio of 0.08mm sieve was also out of the KS standard at part factor of 7~12times, but chloride content, clay contents, coal and lignite were all satisfactory. Meanwhile, chemical composition was satisfactory except for $SO_3$ in 1~6times, and content and amount of harmful substances were all within the specified value except for F in 7~12times. As a result of SEM analysis, the surface quality and porosity were 7~12times more than 1~6times, and it was the quality was degraded. Therefore, it is necessary to reduce the quality deviation by using separate measures in order to utilize it as concrete aggregate in the future, and if it is premixed with fine quality aggregate, it will contribute positively to solve aggregate supply shortage and utilize circulation resources.

• Proceedings of the Korea Society of Poultry Science Conference
• /
• 2002.11a
• /
• pp.59-63
• /
• 2002

1997년 홍콩 가금시장에서의 H5N1 조류독감바이러스의 발병은 18명의 감염된 사람 중에서 6명의 사람의 생명을 앗아갔다. 이 사건은 조류독감바이러스가 매개체를 통하지 않고 닭에서 바로 사람에게 감염한 처음 있는 사건이다. 홍콩가금시장에서의 역학조사는 H5Nl과 H9N2 조류독감바이러스가 함께 공존한다는 것을 밝혔다. 가금에서는 H5N1과 H9N2 조류독감바이러스가 검출되었다. 우리는 H5N1 조류독감바이러스로부터 자을 방어하는데 H9N2 조류독감바이러스의 역할에 대해 연구했다. H5N1과 H9N2 바이러스의 혼합바이러스를 동시에 자에 접종하면 자은 생존하지 못했다. 그러나, H5N1 조류 독감바이러스감염 이전에 H9N2 조류독감바이러스를 감염한 닭들은 생존할 수 있었다 H9N2 조류 독감바이러스로 감염된 닭으로부터 얻어진 혈청은 H5N1 조류독감바이러스와 교차반응을 일으키지 않는다. H9N2 조류독감바이러스로 감염시킨 닭으로부터 얻어진 T임파구 또는 CD8 T임파구를 감염하지 않은 닭에 주입할 때 닭은 H5N1 조류독감바이러스로부터 생존할 수 있었다. 실험실외 킬러임파구실험은 H9N2 조류독감바이러스로 감염된 닭으로부터 얻어진 T임파구는 H5N1과 H9N2 조류독감바이러스로 감염된 목표세포를 동시에 감지했다. 게다가, 생체내 T임파구의 제거실험은 교차보호면역은 a/b TCR를 가진 CD8 T임파구가 중요한 역할을 하며, a/b TCR (Vbl)형의 T임파구가 목표세포를 감지한다는 것을 증명했다. H9N2 조류독감바이러스에 의한 방어면역은 시간이 지남에 따라 감소를 했고, 감염 100일까지 방어력을 나타냈다. 1997년 조류독감바이러스인 H5N1의 홍콩에서의 발병에 대한 풀리지 않은 것 중의 하나는 약 20%의 조류들이 매우 치사율이 높은 H5N1 독감바이러스를 가지고 있음에도 홍콩가금시장에서의 대부분의 닭들은 건강했다. 얻을 수 있는 정보에 따르면 대부분의 자들은 H5N1조류독감바이러스를 변으로 방출했고, 단지 두 곳의 가금시장에 있는 자들이 질병증상을 보였다. 홍콩가금시장에서 분리된 모든 H5N1 조류독감바이러스를 닭에 감염하면 100%의 치사율을 나타낸다. 바이러스 측면에서의 연구에 따르면, H9N2 조류독감바이러스는 홍콩가금시장에서 두 번째로 많이 분리되었다. H9N2 조류독감바이러스에 대한 연구에 따르면 세 가지 형이 홍콩가금시장에서 검출되었다. 1997년에 가장 많이 분리된 H9N2 조류독감바이러스는 PB1과 PB2가 A/Chicken/HongKong /156/97 (H5N1)과 유전적으로 유사한 A/HongKong/G9/97 (H9N2)형이다. A/Chicken/Hong Kong/156/97(H5N1)의 나머지 유전자는 A/Chicken/HongKong/739/94 (H9N2)와 A/chicken /Hong Kong/G23/97의 유전자와 비슷하다. 하나의 A/Quail/Hong Kong/G1/97은 Quail에서 분리되었고, 두 개의 A/Duck/Hong Kong/Y280/97 (H9N2)은 오리에서 분리되었다. A/Quail/Hong Kong/G1/97 (H9N2)의 6개의 내부유전자는 A/HongKon9/156/97 (H5N1)에 유사하나, A/Duck/ Hongkong/Y280/97 (H9N2)의 유전자는 A/HongKong/156/97 (H5N1)과 유사하지 않다. 킬러임파구는 바이러스로 감염된 목표세포를 MHC에 의존하여 파괴한다. 독감바이러스 특이 킬러임파구는 독감바이러스로 감염된 mice의 폐로부터 독감바이러스를 제거하는데 중요하다고 알려져 있다. 독감바이러스의 HA단백질은 특이 킬러임파구의 주요 목표항원 단백질이 아니다. 내부단백질인 nucleoprotein, polymerase (PB1 PB2, PA), Matrix protein, 그리고 비 구조단백질인 NS1에 대한 특이 킬러임파구의 반응이 사람과 mice에서 보고되었다. 독감바이러스에 대한 mice의 킬러임파구의 인식영역은 제한되어 있다고 알려져 있다. 많은 mice MHC 1은 독감바이러스 단백질의 킬러임파구의 epitope를 표현하지 못한다. 사람 기억킬러임파구는 다양한 종류의 독감바이러스의 단백질을 인식한다고 알려져 있다. 지금까지, 닭에서의 독감바이러스의 킬러임파구에 대한 연구는 되지 않았다.

• Journal of the Mineralogical Society of Korea
• /
• v.16 no.4
• /
• pp.333-339
• /
• 2003

A new mineral, Zn analogue of rancieite (Chimooite), has been discovered at the Dongnam mine, Korea. It occurs as compact subparallel fine­grained flaky or acicular aggregates in the massive manganese oxide ores which were formed by supergene oxidation of rhodochrosite­sulfide ores in the hydrothermal veins trending NS­N25E and cutting the Pungchon limestone of the Cambrian age. The flakes of chimooite are 0.2 mm for the largest one, but usually less than 0.05 mm. The acicular crystals are elongated parallel to and flattened on (001). This mineral shows gradation to rancieite constituting its marginal part, thus both minerals are found in one and the same flake. Color is bluish black, with dull luster and brown streak in globular or massive aggregates. Cleavage is perfect in one direction. The hardness ranges from 2.5 to 4. Under reflected light it is anisotropic and bireflectant. It shows reddish brown internal reflection. Chemical analyses of different parts of both minerals suggest that rancieite and chimooite constitute a continuous solid solution series by cationic substitution. The empirical chemical formula for chimooite has been calculated following the general formula, $R_2_{x}$ M $n^{4+}$$_{9­x}$ $O_{18}$ $.$n$H_2O$ for the 7 $\AA$ phyllomanganate minerals, where x varies from 0.81 to 1.28 in so far studied samples, thus averaging to 1.0. Therefore, the formula of Zn­rancieite is close to the well­known strochiometric formula $_Mn_4^{4+}$ $O_{9}$ $.$4$H_2O$. The mineral has the formula (Z $n_{0.78}$N $a_{0.15}$C $a_{0.08}$M $g_{0.01}$ $K_{0.01}$)(M $n^{4+}$$_{3.98}$F $e^{3+}$$_{0.02}$)$_{4.00}$ $O_{9}$ $.$3.85$H_2O$, thus the ideal formula is (Zn,Ca)M $n^{4+}$$_4$ $O_{9}$ $.$3.85$H_2O$. The mineral has a hexagonal unit ceil with a=2.840 $\AA$ c=7.486 $\AA$ and a : c = 1 : 2.636. The DTA curve shows endothermic peaks at 65, 180, 690 and 102$0^{\circ}C$. The IR absorption spectrum shows absorption bands at 445, 500, 1630 and 3400 c $m^{1}$. The mineral name Chimooite has been named in honour of late Prof, Chi Moo Son of Seoul National University.ity.versity.ity.y.

• Korean Journal of Optics and Photonics
• /
• v.18 no.5
• /
• pp.351-361
• /
• 2007

The samples composed of a GST thin film and the protective layers of $ZnS-SiO_2$ or $Al_2O_3$ coated on c-Si substrate were prepared by using the magnetron sputtering method. Samples of three different structures were prepared, that is, i) the GST single film on c-Si substrate, ii) the GST film sandwiched by the protective $ZnS-SiO_2$ layers on c-Si substrate, and iii) the GST film sandwiched by $Al_2O_3$ protective layers on c-Si substrate. The ellipsometric constants in the temperature range from room temperature to $700^{\circ}C$ were obtained by using the in-situ ellipsometer equipped with a conventional heating chamber. The measured ellipsometric constants show strong variations versus temperature. The variation of ellipsometric constants at the temperature region higher than $300^{\circ}C$ shows different behaviors as the ambient medium is changed from in air to in vacuum or the protective layers are changed from $ZnS-SiO_2$ to $Al_2O_3$. Since the long heating time of 1-2 hours is believed to be the origin of the high temperature variation of ellipsometric constants upon the heating environment and the protective layers, a PRAM (Phase-Change Random Access Memory) recorder is introduced to reduce the heating time drastically. By using the PRAM recorder, the GST samples are heated up to $700^{\circ}C$ decomposed preventing its partial evaporation or chemical reactions with adjacent protective layers. The surface image obtained by SEM and the surface micro-roughness verified by AFM also confirmed that samples prepared by the PRAM recorder have smoother surface than the samples prepared by using the conventional heater.

• Journal of Veterinary Clinics
• /
• v.27 no.6
• /
• pp.674-678
• /
• 2010

The effects of medetomidine on the degree of analgesia and sedation in rats were evaluated. The rats were randomly divided into six groups: saline, 1 mL/kg (group 'Saline'); butorphanol, 2.0 mg/kg; medetomidine, 0.2, 0.4, 0.8 or 1.6 mg/kg (group 'MED0.2', 'MED0.4', 'MED0.8' and 'MED1.6', respectively). The degree of analgesia was measured in the $50^{\circ}C$ hot-water tail-flick latency test, and the degree of sedation was evaluated using the numerical sedation score (NSS) and the righting reflex. All doses of medetomidine, except MED0.2, significantly increased the analgesic effect compared to the Saline group. Variables in the MED0.4 and MED0.8 groups, but not in the MED1.6 group, were significantly increased compared to those in the MED0.2 group. However, analgesia with all doses of medetomidine was not significantly different compared to that with butorphanol. Saline and butorphanol treatments did not induce sedation and loss of righting reflex during the recording period. NSS in the MED0.4, MED0.8 and MED1.6 groups were significantly higher than that in the MED0.2 group. NSS in the MED0.8 and MED1.6 groups were not significantly different from that in the MED0.4 group. The latency to loss of righting reflex in the MED0.8 and MED1.6 groups decreased significantly compared to that in the MED0.2 group. Thus, 0.4 and 0.8 mg/kg of medetomidine provided not only reliable analgesia but also sedation to rats. In conclusion, 0.4 to 0.8 mg/kg medetomidine could be a useful chemical restraint method in rats.

• The Journal of the Petrological Society of Korea
• /
• v.6 no.3
• /
• pp.151-165
• /
• 1997

The Kyemyeongsan area of Chungju in the NE part of the Ogcheon metamorphic zone, Koera, consists mainly of the Ogcheon Supergroup(Taehyangsan Quartzite, Hyangsanri Dolomite and Kyemyeogsan Formation) and the MeSozoic Chungju granite. The Kyemyeongsan Formation is composed mainly of metamorphic rocks of various grades derived from conglomeratic, basic, acidic, pelitic and psammitic rocks. The basic and acidic rocks show alternated or interfingered appearence, indicating that they were derived form bimodal type of magmatism in rift environment. Conglomeratic rocks overlie acidic volcanic rocks in geneal, but are underlain by both acidic plutonic and volcanic rocks. This indicaties that the acidic magmatism before the formation of conglomeratic rocks was different from that during or after the formation of conglomeratic rocks in its occurrence mode. The geological structure of the Ogcheon metamorphic zone in the Kyemyeongsan area, Chungju was formed at least by three phases of deormation. The first phase deformation(D1) formed a regional-scale sheath-type fold(F1) closed into the east. Its axial phane(S1) strikes NNW to NW and dips WSW to SW. The stetching lineation(L1), related to the sheath-type fold, plunges westward. The second phase deformation (D2) formed asymmetric fold(F2) of ESE-to SE-vergence with NNE to NE striking axial plane(S2) and $20~45^{\circ}/210~230^{\circ}$ plunging axis(L2). The F2 fold reoriented the original westward plunging L1 into northwestward plunging L1 in its lower limb(overturned limb). The third phase of deformation(D3) was recognized as chevron-type fold(F3) with $45^{\circ}/265$^{\circ}$ plunging axis. The F3 fold was formed by the compression of N-S direction, resulting in the reorientation of the original $20-45^{\circ}/210~230^{\circ}$ plunging L2 into mainly $35~45^{\circ}/260~280^{\circ}$ and subsidiarily $30~45^{\circ}/135~165^{\circ}$ plunging L2. After this deformation, open fold with NS striking and steeply E or W dipping axial plane is formed by the compression of E-W direction.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.3
• /
• pp.454-458
• /
• 2014

In this study, we examined the ionization rate and permeability of nanocalcium prepared from oyster shells with various particle sizes. Four particle sizes of the calcium samples were prepared by centrifugation according to their density disparity in alcoholic solution: NC (normal calcium), C-1 (supernatant of 1,000 rpm), C-2 (supernatant of 2,000 rpm), and C-3 (supernatant of 3,000 rpm). Particle sizes of NC, C-1, C-2, and C-3 were $2,280.3{\pm}64.3nm$, $521.3{\pm}83.3nm$, $313.9{\pm}29.5nm$, and $280.0{\pm}3.4nm$, respectively. C-3 showed a slight increase in ionization rate compared with the other calcium samples, but their differences were not significant. Dialysis membrane-employed analysis showed that nanocalcium permeability increased as its particle size smaller; 32% of C-3 nanocalcium was transported to the outside of the membrane, whereas C-1 showed a 25% transport rate. We determined the permeability of the nanocalciums by using rat intestinal sacs, in order to provide different intestinal environments depending on pH level. Nanocalcium generally showed a higher permeability at pH 7, which represents an ileum environments compared to the duodenum and jejunum environments at pH 4.2 and pH 6.2, respectively. However, C-3 calcium showed the highest permeability, followed by C-2, C-1 and NS calciums. This result shows that the size of calcium positively affected its permeability in the intestinal sac. Taken together, nano-sized calcium derived from discarded oyster shell shows improved permeability in intestinal environments.

• Economic and Environmental Geology
• /
• v.44 no.4
• /
• pp.313-320
• /
• 2011

The Taebaegsan Mineralized District is the most prospective region for the useful mineral commodities such as a coal, non-metallic, metallic mineral in South Korea. From a general point of view, Cambro- Ordovician limestone formations, Myobong slate and Pungchon (Daegi) limestone, are the most fertilizable formations in the Taebaegsan Mineralized District. The geology around Weondong mine area consists mainly of Carboniferous-Triassic formations and Cambro-Ordovician formations intruded by rhyolite/quartz porphyry. The great overthrusted fault of N40~$50^{\circ}E$ direction, so called Weondong overthrust fault, is observed in the central part of the mine area and the NS fault system cuts the overthrusted fault. By postulating from the favorable geological and structural condition around Weondong area, the possibility of deep seated hidden ore bodies is expected. In 2010, on the basis of the results of LOTEM and CSAMT survey, the cross-hole survey was performed for the investigation of the hidden polymetallic ore body in the deep parts of the Weondong mine area and the grade of the newly-discovered orebody is as follows; (1) The cut-off grade for lead-zinc 3%; an weighted average grade 5.50% (2.7 m), (2) The cutoff grade for copper 0.1%; an weighted average grade 0.91% (14.65 m), (3) The cut-off grade for iron 30%; an weighted average grade 38.18% (3.3 m), (4) $WO_3$ for each cut-off grade(0.01%, 0.05%, 0.1%); an weighted average grade 0.29 wt. % (8.8 m), 1.15 wt. % (2.1 m), 1.97 wt. % (1.2 m), (5) $MoS_2$ for each cut-off grade(0.01%, 0.1%); an weighted average grade 0.15 wt. % (6.3S m), 0.28 wt. % (3.15 m), (6) $Ta_2O_5$ for each cut-off grade (0.01%, 0.1%); an weighted average grade 0.13% (19.S m), 1.11% (1.8 m), (7) $Nb_2O_5$ for each cut-offgrade (0.01%, 0.1%); an weighted average grade 0.06% 11.5 m), 0.15% (3.0 m).