• 한국분무공학회지
• /
• 제12권4호
• /
• pp.211-219
• /
• 2007

The liquid film thickness inside a pressure-swirl nozzle was measured, and then the measured liquid film thickness was compared with the results from previous empirical equations. The liquid film inside the nozzle was visualized using extended transparent nozzles and a microscopic imaging system, and then the measurement error was evaluated using optical geometry analysis. The high injection pressures up to 7MPa were adopted to simulate the injection conditions of the direct-injection spark-ignition engines. The totally different two injectors with different fuels, nozzle lengths, nozzle diameters and swirlers were utilized to obtain the comprehensive equations. The results showed that the liquid film thickness very slightly decreased at high injection pressures and the empirical equations overestimated the effect of injection pressure. Most of empirical equations did not include the effect of nozzle length and swirler angle, although it caused significant change in liquid film thickness. A new empirical equation was suggested based on the experimental results with the effects of fuel properties, injection pressure, nozzle diameter, nozzle length and swirler angle.

• 대한기계학회논문집B
• /
• 제35권10호
• /
• pp.1061-1066
• /
• 2011

본 연구에서는 절삭가공 시 생산성 향상을 위해 사용되는 고압분사 홀더(hp holder)에 들어가는 노즐의 유동특성을 파악하였다. 집중형의 노즐 분사형태를 유지하면서 분사되는 유동에 영향을 주는 설계인자로 입구 유입속도, 노즐 유입각도, 노즐 출구직경을 설정하여 이에 대한 수치해석을 수행하였다. 그 결과 입구 유입속도가 높을수록, 노즐 출구직경이 작을수록 분사되는 유체의 압력과 속도가 높은 것으로 나타났다. 노즐 유입각도의 경우에는 각도변화에 따른 유동특성의 차이가 크지 않았지만 약 $15^{\circ}$일 때가 가장 높은 유동특성을 보였다. 또한 결과값을 이용하여 분사되는 유체의 힘에 의해 가공 시 발생하는 칩의 제거 가능 여부를 확인해 보았다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2017년도 제48회 춘계학술대회논문집
• /
• pp.383-387
• /
• 2017

비대칭 3차원 핀틀 노즐 형상에서 연소실과 핀틀 노즐의 연결관 각도와 핀틀 위치가 성능계수에 미치는 영향을 분석하기 위해 3차원 수치해석을 수행하였다. 초음속 노즐을 통해 배출되는 유동 특성을 정확히 예측하기 위하여 $k-{\omega}$ SST의 압축성 보정 난류모델을 적용하였다. 비대칭 3차원 형상에 의한 복잡한 유동 구조로 인하여 나선형 형태의 유선과 유동 박리가 관찰되었으며, 이로 인하여 유동의 전압력 손실이 크게 발생되었다. 유입관의 각도가 감소할수록 성능계수가 증가하였으며, 핀틀의 위치에 따른 유동구조가 크게 변화되기 때문에 이에 대한 성능 특성을 분석하였다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제37회 추계학술대회논문집
• /
• pp.14-17
• /
• 2011

본 연구에서는 노즐 수축각의 차이에 따라 추력기의 성능에 어떤 영향을 미치는지 알아보기 위해 SNECMA 노즐목 가변 추력기에 대해서 4가지 다른 노즐 수축각을 사용하여 수치해석을 수행하였다. 공력하중과 추력성능에 대해 분석하였고 노즐 수축각 $83^{\circ}$의 모델이 가장 좋은 결과를 보였다.

• International Journal of Fluid Machinery and Systems
• /
• 제9권2호
• /
• pp.137-142
• /
• 2016

Variable Geometry System (VGS) is widely applied to the nozzle vane for the radial inflow turbine constituting automotive turbochargers for the purpose of optimizing the power output at each operating condition. In order to improve the performance of radial turbines with VGS, it is necessary to clarify the influences of the setting angle of nozzle vane on the internal flow of radial turbine. However, the experimental measurements are considered to be difficult for the flow in radial turbines because of the small size and the high rotational speed. In the present study, the numerical calculations were carried out for the flow in the radial turbine at three operating conditions by applying the corresponding nozzle vane exit angles, which were set up in the experimental study, as the inlet boundary condition. The numerical results revealed the characteristic flow behaviors at each operating condition.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2002년도 춘계학술대회 논문집
• /
• pp.275-280
• /
• 2002

Results of a numerical simulation of a flowing of the underwater vehicles hull with the pump-jet nozzle are presented. It was calculate velocity distributions and coefficients of the lift force and the longitudinal moment of the hull with the pump-jet nozzle and isolated hull for some values of angle of attack. It was shown that the area of tile influence of the nozzle on the velocities distribution of the hull and character of changing of coefficients of the lift force and the longitudinal moment and their derivatives depending on angle of attack.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.42-44
• /
• 2003

The paper presents the method and apparatus for conformal photoresist spray coating on the 3D structured substrate. The system consists of a high-temperature-rotational chuck, ultrasonic spray nozzle module, angle control module and nozzle moving module. The coating uniformity is acquired by controlling the moving speed of the ultrasonic spray nozzle across the substrate which is rotated constantly. To coat the photoresist conformally the spray angle of the nozzle and the temperature of the substrate are controlled during spray coating. The rotational chuck can be heated up by hot air or $N_2$. The photoresist (AZ1512) has been coated on the 3D structured wafer by spray coating system and the characteristics have been evaluated.

• 대한기계학회논문집B
• /
• 제29권2호
• /
• pp.205-213
• /
• 2005

The drop ejection process from a micro nozzle is investigated by numerically solving the conservation equations for mass and momentum. The liquid-gas interface is tracked by a level set method which is extended for two-fluid flows with irregular solid boundaries. Based on the numerical results, the liquid jet breaking and droplet formation behavior is found to depend strongly on the pulse type of forcing pressure and the contact angle at the gas-liquid-solid interline. The negative pressure forcing can be used to control the formation of satellite droplets. Also, various nozzle shapes are tested to investigate their effect on droplet formation.

• 한국추진공학회지
• /
• 제8권4호
• /
• pp.1-8
• /
• 2004

본 연구에서는 초음속 충동형 터빈 익렬의 유동특성을 알아보기 위해 소형 초음속 풍동을 설계하였으며 Single pass Schlieren system을 이용하여 유동을 가시화하였다. 실험은 3차원 초음속 노즐과 익렬을 조합하여 노즐 설치각에 따라 실시하였다. 실험을 통해 충격파를 포함한 복잡한 유동 형태와 노즐-익렬, 충격파-경계층 상호작용 등을 관찰할 수 있었다.

• 대한인간공학회지
• /
• 제31권2호
• /
• pp.389-396
• /
• 2012

Objective: The aim of this study is to design an auto showering system regarding bed type for old people or bedridden patients. Background: The rapid growth concerning the aging population leads to an increase in elderly bedridden patients living in senior care centers and hospitals where care givers have difficulty bathing older people with limited mobility. Method: In this study, a showering equipment for experiment was based on anthropometric and researching existing products. The nozzle position was optimized by showering tests and simulations using showering equipment. Results: The problems regarding the existing products were analyzed and the nozzle position was optimized through showering tests. The number, position, and spraying angle of the nozzle were optimized through showering simulations. The automatic showering system concerning bed type was designed by considering their results. Conclusion: When designing an automatic showering system, the most important design element involves determining the position of nozzle and angle of water injection and the number of nozzles. The system was developed by applying the results through user centered-research. Application: The user centered-research for developing products was applied directly in order to develop automatic baths, showering products etc. Furthermore, it was also available to be applied towards senior friendly products.