• Journal of The Korean Association of Information Education
• /
• 제10권3호
• /
• pp.371-384
• /
• 2006

In this research, it was developed an instructional analysis program by computer to support the improvement of teachers' inst겨ctional profession and was tested the efficiently of the program. This program include 6 modules such as Flanders' analysis, Tuckman's analysis, Movement pattern analysis, Concentration of instruction analysis, Analysis method for each factor and Users' training contents. It was made for all modules to guarantee the convenience of use, efficiency of analysis, customized support for each person, strengthening the training feature, standardization and continual updating. The results of instruction analysis are continuously stored as DB, which teachers can frequently confirm the improvement of class skill in daily or monthly base. It also is verγ small for the size of the program to sure that it works at a normal notebook computer or a lower performing desktop computer. The developed program was applied to actual classes for 2 months, and it was compared the difference of instruction efficiency before and after use the program to test the efficiency of the developed computer program. The result shows that this instructional analysis program could meaningfully improve the instruction efficiency. Therefore, if the program is used in school's Instructional supervision, it can be improved the instructional efficiency, which means that a teacher can teach students more confidently and systematically.

• Journal of Environmental Health Sciences
• /
• 제38권2호
• /
• pp.136-141
• /
• 2012

Objectives: The objective of this study was to investigate whether the ammonia nitrogen concentration of aqueous samples such as drinking water can be determined by measuring the saturation of the samples colored by indophenol method. Methods: A color saturation measurement system was constructed by connecting a notebook computer to an image acquisition device composed of a PC camera and a light source, and was then used to measure the saturation of samples colored by blue indophenol complex. Results: Between two available light sources, a fluorescent lamp was selected due to its demonstrating better linearity between color saturation and ammonia nitrogen concentration. Prediction by quadratic regression was more accurate than by linear regression, and prediction by quadratic regression in the concentration range of 0.1-1.0 $mg/l$ was more accurate than in the concentration range of 0.0-1.0 $mg/l$. Regression-based predictions over 0.25 $mg/l$, 0.55 $mg/l$ and 0.75 $mg/l$ concentrations were implemented both by spectrophotometric method and by measuring color saturation. In the case of 0.25 $mg/l$, the predicted concentration by spectrophotometric method was $0.256{\pm}0.0076\;mg/l$ and the predicted concentration by measuring color saturation was $0.246{\pm}0.0086\;mg/l$ (p=0.051). In the case of 0.55 $mg/l$, they were $0.561{\pm}0.0068\;mg/l$ and $0.564{\pm}0.0166\;mg/l$ (p=0.660). In the case of 0.75 $mg/l$, they were $0.755{\pm}0.0139\;mg/l$ and $0.762{\pm}0.0088\;mg/l$ (p=0.215). Conclusions: There were no statistically significant differences (p>0.05) between the data from the two methods in all three of the concentrations. Therefore, the color saturation measurement method proposed in this paper may be considered applicable for determining the ammonia nitrogen concentration of aqueous samples such as drinking water.

• Journal of the Institute of Convergence Signal Processing
• /
• 제9권4호
• /
• pp.329-336
• /
• 2008

The facilities with new technologies in the recent power plants become larger and need a lot of high cost for maintenance due to stop operations and accidents from the operating machines. Therefore, it claims new systems to monitor the operating status and predict the faults of the machines. This research classifies the normal/abnormal status of the machines into 5 levels which are normal-level/abnormal-level/care-level/dangerous-level/fault and develops the new system that predicts faults without stop operation in power plants. We propose the regional segmentation technique in the frequency domain from the data of the operating machines and generate the Peak-codes similar to the Bar-codes, The high efficient and economic operations of the power plants will be achieved by carrying out the pre-maintenance at the care level of 5 levels in the plants. In order to be utilized easily at power plants, we developed the algorithm appling to a notebook computer from signal acquisition to the discrimination.

• Proceedings of the Korea Technology Innovation Society Conference
• /
• 한국기술혁신학회 2001년도 추계학술대회
• /
• pp.169-186
• /
• 2001

The researches about the general flow of new product development process was achieved in various field. But there was little discussion about the methodologies and tools used in that process. So we suggest new DEA model as the methodology that determines sustainable price and quality attributes and this can substitute econometric hedonic methodology. To make smooth surface composed of quality attributes and price, we use QC-DEA model. Additionally we make AR-QC DEA model by introducing AR to reflect consumer perceptions on quality attributes. AR-QC DEA overcomes the limits of parametric methodology and represents product-specific shadow prices, so it is possible to supply the information about quality attributes and price combination in new product development process and to simulate easily whether new product can exist in the market. Finally by empirical research on notebook computer we can show that AR-QC DEA has the ability to explain market change.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• 제10권5호
• /
• pp.359-363
• /
• 2017

The LED (Liquid Emitting Diode) frame device is a big part of the representative display industry in Korea. LED is an essential part for TV, monitor, notebook, and mobile phone. In Japan, Taiwan, China and other countries, investment in LEDs has been strengthened, and productivity has become an important issue. However, as the size of the parts becomes smaller, the inconsistent inspection by the human eye becomes a problem of reliability, so that the automatic inspection process becomes an essential issue in the field of LED module inspection. In this paper, we investigate defects in visual inspection process using computer vision technology. The inspection of the LED frame is made quickly and accurately, thereby improving the efficiency of the process and shortening the inspection time. As a result of applying the inspection system to the field, we confirmed that it is possible to inspect quickly and accurately.

• Journal of Animal Environmental Science
• /
• 제3권2호
• /
• pp.87-95
• /
• 1997

This study was peformed to compare work routine time and performance of milking systems by measuring motion and time in milking procedure. Data were collected from thirteen dairy farms among which milking was done by bucket in two farms, by pipelines in three, by tandem parlors in four including one remodeled side-opening, by herringborn parlors in three and by a parallel milking parlor. Recording time and motion for milking parlor. Recording time and motion for milking procedure was performed by stopwatch and notebook computer. Work routine elements were recorded and calculated into cows milked per-man-hour(CMPH). The results are as follows : Average milking time per cow(MTPC) in bucket and pipeline milking systems usually installed in cow stall were 442.7 and 395.8 seconds, respectively. And average CMPH of bucket and pipeline milking system were 144.5, 303.3, 272.5 and 380.3 seconds, respectively. And CMPH of tandem, herringbone, parallel and modified side-opening systems were 24.9, 11.9, 13.2 and 9.5 heads, respectively. CMPH was the highest in the tandem milking system and the lowest in the bucket milking facilities. CMPH, when milked in a parlor resulted in high value compared with bucket or pipeline milking systems installed in cow stable. They showed considerably low CMPH compared with the results of other countries. The reason why so low CMPH could be derived from type and mechanization of facilities and equipment, operator's ability, number of operator, idle time and milking procedure.

• Journal of Korean Society for Geospatial Information Science
• /
• 제3권2호
• /
• pp.213-220
• /
• 1995

Map Matching is the method for correcting the current position from dead reckoning in Car Navigation System. In this paper, we proposed the new map matching algorithm that can correct the positioning error caused by sensors and digital map data around the cross road area. To do this, first we set the error boundary of the cross road area by combining the relative error of moving distance and the absolute error of road length, second, we find out the starting point of turning within the determined error boundary of the cross point area, third, we compare the turning angle of the car to the angle of each possible road, and the last, we decide the matched road. We used wheel sensor as a speed sensor and used optical fiber gyro as a directional sensor, and assembled the sensors to the notebook computer. We testified our algorithm by driving the Daejeon area-which is a part of south Korea-as a test area. And we proved the efficiency by doing that.

• The KIPS Transactions:PartA
• /
• 제15A권2호
• /
• pp.101-110
• /
• 2008

Ubiquitous computing has extended the computer system into the whole physical space and has ushered the emergence of more dynamic distributed systems. This environment require unique QoS parameters for various devices, resources and user requirements. In this paper, we propose a new hybrid QoS management model which defines a static-dynamic QoS parameter that is more appropriate to the ubiquitous computing environment. This model consists of the QoS Control Management Module(QoS CMM) in the client side and the Resource QoS Management Module (RQoS MM) in the server side. The RQoS MM deals with the static QoS parameters and the whole QoS control of the distributed control(QoS CMM) in order to minimize server load in cases of multiple communication. Finally, we present the experimental result of our location based application using a graphical user interface that shows the multimedia service execution of selected client device types such as desktop PC, notebook and PDA.

• Journal of Institute of Control, Robotics and Systems
• /
• 제16권5호
• /
• pp.463-468
• /
• 2010

An obstacle avoidance method for a mobile robot is proposed in this paper. Our research was focused on the obstacles that can be found indoors since a robot is usually used within a building. It is necessary that the robot maintain the desired direction after successfully avoiding the obstacles to achieve a good autonomous navigation performance for the specified project mission. Sensors such as laser, ultrasound, and PSD (Position Sensitive Detector) can be used to detect and analyze the obstacles. A PSD sensor was used to detect and measure the height and width of the obstacles on the floor. The PSD sensor was carefully calibrated before measuring the obstacles to achieve better accuracy. Data obtained from the repeated experiments were used to plot an error graph which was fitted to a polynomial curve. The polynomial equation was used to navigate the robot. We also obtained a direction-error model of the robot after avoiding the obstacles. The prototypes for the obstacle and direction-error were modeled using a neural network whose inputs are the obstacle height, robot speed, direction of the wheels, and the error in direction. A mobile robot operated by a notebook computer was setup and the proposed algorithm was used to navigate the robot and avoid the obstacles. The results showed that our algorithm performed very well during the experiments.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 한국해양정보통신학회 1999년도 추계종합학술대회
• /
• pp.363-367
• /
• 1999

As the subscription rate to both Internet services and wireless communications services increases rapidly, traffic in the future wireless communications will be dominated by Internet applications. Current research for wireless technology is focused to the multimedia data transmission mainly for the personal computer or notebook whose display which has large display and abundant memory. But in the near future, Internet access request from the handphone or PDA device which is already spreaded in the world will be large. Special handset terminals which has small display monitor, low capacity memory and poor processing power has to be managed differently from torrent wireless communications protocols. So, WAP Forum is organized with wireless handset manufacturers in the world and the standardization process for wireless application is being actively developed. In this paper, basic model and architecture of WAP is introduced and adaptation requirements for change from HTML documents to WML formats are proposed. Also, compression ratio gained in the transform from the existing web documents to WML is shown.