• 한국전자파학회논문지
• /
• 제16권2호
• /
• pp.199-203
• /
• 2005

본 논문에서는 Ultra-Wideband(UWB)통신을 위한 새로운 소형 주파수 대역 저지 안테나를 설계 및 제작한다. 설계된 안테나는 초광대역 특성을 만족하면서, IEEE 802.11a와 HIPERLAN/2에 의해 사용이 제한된 $5.15\~5.825\;GHz$에서 주파수 대역 저지 특성을 갖는다. 안테나의 광대역 특성을 얻기 위해서 요철 모양의 접지면을 구현하였고, 또한 제한된 주파수 대역에서 저지 특성을 갖기 위해 U모양의 얇은 슬랏을 사각형 복사 패치 위에 구현 하였다. 제작된 안테나는 저지 대역인 $4.92\~5.866\;GHz$을 제외하고 $2.95\~11.7\;GHz$ 대역에서 정재파비 2 이하를 만족하는 광대역 특성을 나타낸다.

• Restorative Dentistry and Endodontics
• /
• 제26권2호
• /
• pp.162-170
• /
• 2001

The purpose of this study was to investigate the effect of cavity configurations on the marginal leakage of class 5 glass ionomer cement and composite resin restorations. Four types of cavities such as saucer shape. notch shape. combined shape(notch shape occlusally and saucer shape gingivally). and U shape were prepared on the buccal and lingual surfaces of 80 extracted premolars(40 cavities for each shape). Occlusal cavity margins were placed at enamel and cervical margins were placed at dentin. 10 cavities of each shape were restored with Ketac Fil as a conventional glass ionomer cement. Fuji II LC improved as a resin modified glass ionomer cement, Z 100 as a hybrid composite resin. and Tetric Flow as a flowable composite resin (40 cavities for each material). After thermocycling, teeth were immersed in 5% basic fuchsin solution for 6 hours and sectioned longitudinally in a buccolingual direction through the center of the restoration. The dye penetrations at the tooth restoration interface were examined by stereomicroscope. The Result were as follows 1. In saucer shape, notch shape and combined shape, composite resin restorations showed lesser leakage than glass ionomer restorations(p<0.05) and in U shape. Tetric Flow showed the least marginal leakage and others were decreased as Z 100. Fuji II LC improved, Ketac Fil in that order. There were statistically significant difference between Tetric Flow and Fuji II LC improved. Ketac Fil and between Z 100 and Ketac Fil(p<0.05). 2. In Ketac Fil restoration group, saucer shape showed the highest marginal leakage and U shape showed the least marginal leakage and others were decreased as notch shape, combined shape in that order. There were statistically significant difference between saucer shape and combined shape, U shape and between notch shape and U shape(p<0.05). 3. In Fuji II LC improved restoration group, U shape showed the least marginal leakage. There were statistically significant difference between U shape and other three shapes(p<0.05). 4. The cavity configuration had no significant effect on marginal leakage of composite resin restorations(p>0.05).

• The Korean Journal of Pain
• /
• 제26권2호
• /
• pp.130-134
• /
• 2013

Background: The aims of this study were to analyze the anatomic variations of supraorbital foramina/notches in Koreans and to compare the results with those of previous studies examining other races. We evaluated the three-dimensional computed tomography (3D-CT) images of human faces using multidetector computed tomography (MDCT). Methods: A total of 395 adults (232 men and 163 women) were enrolled and the 3D-CT images of their faces were reviewed in this study. In this study, the data from the images included the presence, shape, width and distance from the nasion to the supraorbital foramina/notches. ANOVA was used to assess the main effects of gender and side (right or left foramen/notch), and comparisons of the means were done by paired t-test. Results: The most common shapes in Koreans were a single notch (39.5%) on the right hand side and a single foramen (42.3%) on the left hand side. The incidence of a single foramen in Koreans was high compared to other races. The mean foramen diameter was $2.34{\pm}0.78$ mm, and the mean distance from the nasion was $27.19{\pm}4.03$ mm. The mean notch diameter was $3.37{\pm}1.71$ mm, and the mean distance from the nasion was $23.42{\pm}2.45$ mm. Conclusions: This is the first study on the variations of supraorbital foramina/notches in Koreans using 3D-CT images of faces. The anatomic characteristics of the supraorbital foramina/notch will help in performing nerve blocks and maxillofacial surgery.

• Journal of Power Electronics
• /
• 제17권4호
• /
• pp.849-859
• /
• 2017

This paper illustrates the analysis and design of a multi-resonant converter applied to an electric vehicle (EV) charger. Thanks to the notch resonant characteristic, the multi-resonant converter achieve soft switching and operate with a narrowed switching frequency range even with a wide output voltage range. These advantages make it suitable for battery charging applications. With two more resonant elements, the design of the chosen converter is more complex than the conventional LLC resonant converter. However, there is not a distinct design outline for the multi-resonant converters in existing articles. According to the analysis in this paper, the normalized notch frequency $f_{r2n}$ and the second series resonant frequency $f_{r3n}$ are more sensitive to the notch capacitor ratio q than the notch inductor ratio k. Then resonant capacitors should be well-designed before the other resonant elements. The peak gain of the converter depends mainly on the magnetizing inductor ratio $L_n$ and the normalized load Q. And it requires a smaller $L_n$ and Q to provide a sufficient voltage gain $M_{max}$ at ($V_{o\_max}$, $P_{o\_max}$). However, the primary current increases with $(L_nQ)^{-1}$, and results in a low efficiency. Then a detailed design procedure for the multi-resonant converter has been provided. A 3.3kW prototype with an output voltage range of 50V to 500V dc and a peak efficiency of 97.3 % is built to verify the design and effectiveness of the converter.

• Nuclear Engineering and Technology
• /
• 제54권5호
• /
• pp.1588-1596
• /
• 2022

In the nuclear power plants, stainless steel is widely used for fabrication of various components such as piping and pipe fittings. These piping components are subjected to cyclic loading due to start up and shut down of the nuclear power plants. The application of cyclic loading may lead to initiation of crack at stress raiser locations such as nozzle to piping connection, crown of piping bends etc. of the piping system. Crack initiation can also take place from the flaws which have gone unnoticed during manufacturing. Therefore, prediction of crack initiation life would help in decision making with respect to plant operational life. The primary objective of the present study is to compile various analytical models to predict the crack initiation life of the pipes with notch. Here notch simulates the stress raisers in the piping system. As a part of the study, Coffin-Manson equations have been benchmarked to predict the crack initiation life of pipe with notch. Analytical models proposed by Zheng et al. [1], Singh et al. [2], Yang Dong et al. [25], Masayuki et al. [33] and Liu et al. [3] were compiled to predict the crack initiation life of SA312 Type 304LN stainless steel pipe with notch under fatigue loading. Tensile and low cycle fatigue properties were evaluated for the same lot of SA312 Type 304LN stainless steel as that of pipe test. The predicted crack initiation lives by different models were compared with the experimental results of three pipes under different frequencies and loading conditions. It was observed that the predicted crack initiation life is in very good agreement with experimental results with maximum difference of ±10.0%.

• 대한토목학회논문집
• /
• 제32권1A호
• /
• pp.39-48
• /
• 2012

본 논문에서는 V형 노치 및 반원형 노치 균열을 갖는 패치보강 적층판의 응력확대계수 산정을 위하여 수치해석적 방법을 사용한다. p-수렴 비등매개변수 모델이 고려되고, 이와 같은 비등매개변수 모델의 결과를 활용한 3차원 가상균열닫힘법에 대한 식이 표현된다. 1차원 로바토 함수로부터 확장된 3차원 계층적 형상함수를 가지고서, 임의의 요소에서의 변위장의 변위-변형률 관계와 3차원 구성방정식이 표현된다. 원형경계의 기하형상을 나태내기 위해 초유한사상기법을 사용한다. 응력집중계수, 응력분포, 자유도, 그리고 무차원 응력확대계수 등의 항목에 대해서, 제안된 모델의 정확도와 단순성이 기존의 결과들과의 비교를 통해 설명된다. 균열 적층판의 폭, 높이, 노치근입부의 반경, V형 노치의 경사각, 균열길이 등의 변화에 따른 응력확대계수가 산정된다.

• Journal of Welding and Joining
• /
• 제26권3호
• /
• pp.37-44
• /
• 2008

Charpy V-Notch test is commonly used to evaluate fracture toughness. However, since the region to be evaluated is limited to bulk material due to the specimen size required, individual evaluation of micro-structures on weldment is very difficult. In this study, ASP(Advanced Small Punch) test was carried out to evaluate material degradation and fracture toughness on the B.M, W.M and each micro-structures of HAZ for X20CrMoV121 and 2.25Cr1Mo steels with artificial aging time. In addition, to evaluate fracture toughness and material degradation of B.M and W.M of X20CrMoV121 steels with aging times, CVN (Charpy V-notch) test was performed. And then the correlation between ASP and CVN test on X20CrMoV121 steels was obtained. Furthermore, through this correlation, material degradation property of each micro-region of the HAZ in weldment, which was impossible to be evaluated by the CVN test, can be estimated and determined.

• 대한기계학회논문집
• /
• 제6권2호
• /
• pp.107-112
• /
• 1982

In order to analyze and investigate in the fatigue behavior of the notched specimens under the two level stressing, the U-notched specimens of structural carbon steel which is generally used is prepared. The obtained results are summarized as follows; (1) The fatigue limit of the U-notched specimens is lower than that of the unnotched. The fatifue notch factor (.betha.) of the U-notched specimens is 1.44 for mild steel and 1.52 for harden steel. The notch sensitivity (q) is 0.68 for mild steel and o.8 for harden steel. That is, these facts show that harden steel is more sensitive to the notch than mild steel. (2) The fatigue life time of the U-notched specimens under the overstressing is shorter than under the constant stressing, and the degree of fatigue life time decrease is different to each stress level; the degree for the high stress level is more than for the low stress level. (3) The fatigue life time of the U-notched specimes under the understressing is longer than under the constant stressing, and the degree of fatigue life time increase for the low stress level is more than for the high stress level.

• International Journal of Internet, Broadcasting and Communication
• /
• 제13권1호
• /
• pp.161-167
• /
• 2021

This paper proposes a new personalized HRTF estimation method which is based on a deep neural network (DNN) model and improved elevation reproduction using a notch filter. In the previous study, a DNN model was proposed that estimates the magnitude of HRTF by using anthropometric measurements [1]. However, since this method uses zero-phase without estimating the phase, it causes the internalization (i.e., the inside-the-head localization) of sound when listening the spatial sound. We devise a method to estimate both the magnitude and phase of HRTF based on the DNN model. Personalized HRIR was estimated using the anthropometric measurements including detailed data of the head, torso, shoulders and ears as inputs for the DNN model. After that, the estimated HRIR was filtered with an appropriate notch filter to improve elevation reproduction. In order to evaluate the performance, both of the objective and subjective evaluations are conducted. For the objective evaluation, the root mean square error (RMSE) and the log spectral distance (LSD) between the reference HRTF and the estimated HRTF are measured. For subjective evaluation, the MUSHRA test and preference test are conducted. As a result, the proposed method can make listeners experience more immersive audio than the previous methods.

• Journal of Welding and Joining
• /
• 제4권3호
• /
• pp.26-31
• /
• 1986

(1) Implant 용접저온귀열시험은 용접 열cycle에 따른 금속조직의 경향과 구속상태의 경향을 분 리하여 평가할 수 있는 사용한 시험법이다. (2) 한계파단응력(.sfgma.$_{cr}$ .)은 재료의 탄소다량( $C_{eq}$ .) 및 융접부 광산성수소량 ( $H_{D}$)과 밀접한 관계를 가지며 $C_{eq}$ . 및 $H_{D}$가 작을수록 .sfgma.$_{cr}$ .가 높다. (3) 시험편의 notch형상이 circular이든 spiral이든 한계파단응력은 동일하다. (4) 시험편의 파단은 notch로 부터 발생하기 시작하여 그 부분에서는 수소포화 의벽개파면은 나타낸다.