• 항공우주기술
• /
• 제4권1호
• /
• pp.150-161
• /
• 2005

발사체의 노즈 페어링 벤트 홀 크기 결정 기법의 정확도를 검증하기 위한 시험을 수행하였다. 한국항공우주연구원 우주비행시험그룹이 보유한 열진공 챔버(Bake-Out Chamber)를 이용하여 챔버 내부 압력을 대기압에서 진공으로 떨어뜨렸으며, 그 속에 다양한 벤트홀이 설치된 모델을 넣고 모델 내외부의 압력 및 온도 변화를 측정하였다. 시험 과정에서 나타난 시험 설비 및 측정 장비의 특성을 검토하고 이들이 얻어진 시험 데이터의 정확도 및 신뢰도에 미치는 영향을 분석하였다. 설비 및 측정 장비의 한계 내에서 최대한의 정확도를 얻을 수 있도록 데이터를 처리하였으며, 이렇게 얻어진 시험 결과로부터 벤트 홀 면적 및 배치에 따르는 영향을 분석하였다.

• Journal of Yeungnam Medical Science
• /
• 제5권1호
• /
• pp.135-139
• /
• 1988

저자들은 비강에서 발생한 원발성 악성 흑색종 4례를 경험하고 그 예가 드물다고 생각되어 문헌고찰도 함께 하였다.

• 한국생활과학회지
• /
• 제23권3호
• /
• pp.529-544
• /
• 2014

The purpose of this study is to investigate the effect and potential problem of before and after technique in cosmetic surgery advertisements. This study would draw the positive and negative aspects in executing before and after technique by segmenting the surgical part(eyes, nose, and breast). And this study compared before and after technique with after technique and doctor(expert) endorser. Independent variables of this study are advertisement technique(before and after/after/doctor) and the kind of surgery(double eyelid surgery/ rhinoplasty/mastoplasty). Dependent variables of this study are general attitude toward advertising, hospital believability, ethical judgement toward advertising, intention to cosmetic surgery. This study is run as $3{\times}3$factorial design with 30 subjects per cell, resulting in a total sample size of 270. The result of this study shows that advertising technique in cosmetic surgery advertisement important variable to mediate the effect. This study found that before and after technique was more effective than any other techniques. Also, this study found that the kind of surgery variable should be considered in the execution of cosmetic surgery advertisement. Therefore, the result suggests that the kind of surgery and advertisement technique should be spontaneously considered by cosmetic surgery clinic and advertising regulation organizations for the effective communication way and consumer protection.

• 제어로봇시스템학회논문지
• /
• 제7권4호
• /
• pp.309-318
• /
• 2001

In this paper, we describe methods that analyze a human gesture. A human interface(HI) system for analyzing gesture extracts the head and hand regions after taking image sequence of and operators continuous behavior using CCD cameras. As gestures are accomplished with operators head and hands motion, we extract the head and hand regions to analyze gestures and calculate geometrical information of extracted skin regions. The analysis of head motion is possible by obtaining the face direction. We assume that head is ellipsoid with 3D coordinates to locate the face features likes eyes, nose and mouth on its surface. If was know the center of feature points, the angle of the center in the ellipsoid is the direction of the face. The hand region obtained from preprocessing is able to include hands as well as arms. For extracting only the hand region from preprocessing, we should find the wrist line to divide the hand and arm regions. After distinguishing the hand region by the wrist line, we model the hand region as an ellipse for the analysis of hand data. Also, the finger part is represented as a long and narrow shape. We extract hand information such as size, position, and shape.

• 한국정밀공학회지
• /
• 제16권4호통권97호
• /
• pp.148-154
• /
• 1999

This study was carried out to verify grinding performance of dental diamond bur and investigate the possibility of AE application in dentistry field. Workpieces were made of acryl and bovine respectively for the experiments in this study. Grinding test was conducted to get the data of grinding resistance and specific grinding energy of four different types of diamond bur by using tool dynamometer. AE signal was acquired to verify grinding process in the AE measuring system. Tool wear was observed to find parameters about grinding characteristics of diamond bur by means of SEM picture. It was found that the wear of dental diamond bur could be detected with polishing of grinding material, removal of adhesive parts, wear of particles neighboring cutting nose, loss of material and elevation of temperature. The wear of B, C, D type diamond bur is due to wear and fracture of grain size. Abnormal state can be found through the behavior of AE signal in the grinding working. As a result, it is expected that forecast of abnormal state is possible using AE equipments under real time process.

• 한국군사과학기술학회지
• /
• 제19권5호
• /
• pp.638-644
• /
• 2016

In this research, theoretical study on empirical analysis method to estimate waterdrop's deformation by shock wave is presented. Flow field is calculated using theoretical and empirical relations. Waterdrop's deformation including movement, size, mass, and orientation is modeled using empirical relations derived from existing experimental data. Developed method is applied to specific flight examples with arbitrary flight speed and vehicle's configuration. The flight speed is assumed to Mach number of 2 and 4. The diameter of waterdrop is varied from 1 to 5 mm. Waterdrops along the stagnation line in front of hemispherical nose with the radius of 50 mm and around a cone-shaped side wall with the half angle of 20 degree are considered. It is found that the maximum diameter of the waterdrop is increased up to 2.77 times the initial diameter. The mass is conserved more than 66.7 %. In the case of a cone-shaped side wall, waterdrop's orientation angles defined from the flight direction when the Mach number is 2 and 4 are calculated as 33.0 and 25.6 degree, respectively.

• 치과방사선
• /
• 제26권2호
• /
• pp.65-73
• /
• 1996

The purpose of this study was to evaluate the clinical and computed tomographic features of 7 cases of maxillofacial gunshot injuries in the suicidal patients visited the emergency room, Capital Armed Forces General Hospital. The obtained results were as follows : 1. The gunshot wounds were directed from submental area to dorsum of nose(3 cases), frontal area(1 case), orbit(1 case), infraorbital area (1 case), and lateral to nasal wing(l case). The shape of inlet in gunshot wounds were round (diameter: l-3cm) and that of outlet were oval shape(size : inlet

• 한국기계가공학회지
• /
• 제18권2호
• /
• pp.44-51
• /
• 2019

With the goal of tissue regeneration for organs damaged through an accident or a disease, research on tissue engineering has been conducted to produce 3-D scaffolds that can support the cells in the attachment and growth for the cell proliferation and differentiation. A scaffold requires a suitable pore size and porosity to increase the nutrient circulation or oxygen supply for the attachment and growth of cells. The existing production methods such as solvent-casting particulate leaching, phase separation, and fiber bonding have certain disadvantages. With these methods, it is difficult to obtain a free desired shape. In addition, certain pore sizes and interconnectivities among the pores may not be guaranteed. To solve these problems, this study has fabricated a scaffold with a 3-D shaped nose using Alginate, which is a natural polymer obtained through Fused Deposition Modeling (FDM), one of the CAD/CAM-based Solid Freeform Fabrication (SFF) methods.

• Medical Lasers
• /
• 제8권2호
• /
• pp.43-49
• /
• 2019

The plume produced by vaporizing tissue with a laser contains a variety of contaminants called laser-generated air pollutants (LGACs). LGACs consist of a mixture of toxic gas components, biomicroparticles, dead and living cells, and viruses. Toxic odors and thick smoke from surgical incisions and the coagulation of tissues can irritate eyes and airways, as well as cause bronchial and pulmonary congestion. Because of the potential risk of the smoke, it is advisable to appropriately remove it from the surgical site. We recommend using a smoke evacuator to remove the smoke. Suction nozzles should be placed as close as possible to the surgical site in a range of 2 cm or less. In-line filters should be used between the inlet and outlet of the surgical site. All air filtration devices should be capable of removing particles below 0.1 microns in size. The filter pack should be handled according to infection control procedures in the operating room. The laser mask can be an auxiliary protective device if it is properly worn. Some smoke inhaled under the nose wrap or over the side of the mask will not be filtered. As in electrosurgical operations, a suitable mask should be worn while smoke is present.

• 한국안광학회지
• /
• 제1권1호
• /
• pp.73-84
• /
• 1996

소아용 안경의 temple부분은 알맞는 탄력성이 있고 bridge부분은 충분한 견고성이 있어야 하여, 옥형 사이즈나 temple의 길이는 적어도 3-4종류가 있는 안경테로 하여야 한다. 또 pad는 높아와 폭 및 각도 조정이 가능한 것을 선택해야 하며, pad와 temple의 접촉에 대한 보정력이 충분한 것을 선택해야 한다. pad의 fitting은 비능부(鼻陵部)에 작용하는 안경중량의 크기가 압력에 비례하므로 pad의 전면(全面)이 비능부(鼻陵部)에 균일하게 접촉할 수 있도록 fitting해야 하며, pad는 접촉면이 넓은 것이 좋다. 렌즈의 선택시 주의할 점은 렌즈의 도수가 강해 질수록 안경 총중량에 차지하는 렌즈중량의 비율이 커지므로 무게는 될 수 있는대로 가벼운 것을 선택해야 하고, 최소직경 생지렌즈로 하는 것이 좋으며, 깨어지지않고, 안전성이 뛰어난 프라스틱 렌즈를 사용하는 것이 적합하다.