• The korean journal of orthodontics
• /
• v.28 no.6 s.71
• /
• pp.975-979
• /
• 1998

Our Goal of modified segmental osteotomy on maxilla accompanied by mandibular anterior subapical osteotomy was to get the best results from patients of bi-alveolar or bi-maxillary protrusion. In this study, cephalometric and photo (en face, profile) analysis have been compared to define the soft tissue change after surgery. Lip protrusion was efficiently reduced and nasolabial angle was much obtused. Although nose was a little widened, it was quite acceptable. Blood circulation on osteotomized segment was well maintained. This relatively simple methods could be successfully applied to many patients.

• International Journal of Precision Engineering and Manufacturing
• /
• v.9 no.4
• /
• pp.32-38
• /
• 2008

This paper describes a fast tool control (FTC)-based diamond turning process for fabricating large-area high-quality micro-lens arrays. The developed FTC unit has a stroke of $48{\mu}m$ and a resonance frequency of 4.9 kHz. Micro-lens arrays were fabricated using a micro-cutting tool with a nose radius of $50{\mu}m$. The FTC unit was integrated with a force sensor so that the initial position of the micro-cutting tool with respect to the workpiece surface could be detected through monitoring the contacting force. The length and depth of the designed parabolic micro-lens profile were $190{\mu}m$ and $20{\mu}m$, respectively. A micro-lens array was fabricated on a cylinder surface over an area of ${\phi}55 mm{\times}40 mm$.

• The korean journal of orthodontics
• /
• v.18 no.1 s.25
• /
• pp.127-139
• /
• 1988

Esthetic is one of the prime goal of the orthodontic treatment. It is represented by the word of harmony or balance. There is no absolute esthetic norm but it is important to study about it in orthodontic and orthognatic surgical treatment planning. The purpose of this study is to obtain the norm of Korean female adolescents who were candidates of 1986, 1987 Miss Korea Beauty Contest. The 77 individual samples were selected and studied by cephalometric analysis. Obtained results were as follows: 1 Korean esthetic norm was obtained. 2. Simple correlation coefficient was obtained between each measurements. 3. Holdaway ratio of Korean beauty was 3.3 : 1. 4. To compare with caucasian, profile of Korean beauty had less prominant nose, more prominant lip and deeper sulcus depth.

• Journal of Multimedia Information System
• /
• v.8 no.2
• /
• pp.85-92
• /
• 2021

In a face, there is much information of person's identity. Because of this property, various tasks such as expression recognition, identity recognition and deepfake have been actively conducted. Most of them use the exact frontal view of the given face. However, various directions of the face can be observed rather than the exact frontal image in real situation. The profile (side view) lacks information when comparing with the frontal view image. Therefore, if we can generate the frontal face from other directions, we can obtain more information on the given face. In this paper, we propose a combined style model based the conditional generative adversarial network (cGAN) for generating the frontal face from multi-view images that consist of characteristics that not only includes the style around the face (hair and beard) but also detailed areas (eye, nose, and mouth).

• The korean journal of orthodontics
• /
• v.27 no.6 s.65
• /
• pp.881-889
• /
• 1997

The purpose of this study was to compare four groups of Oriental young adults (169 males and 174 females) with normal occlusion and well balanced faced. Lateral cephalograms of 100 Koreans, 100 Chinese, 72 Vietnamese and 71 Japanese were digitized and six profile measures were computed. Analyses of variance showed that total facial profile(Gl'-Pr'-Pg') of Chinese was significantly less convex than the profile of Koreans or Vietnamese. Facial profile(Gl'-Pr'-Pg') of Chinese was also significantly less convex than that of Vietnamese. Holdaway's soft tissue angle(Pg'-LS:N-B) was significantly greater in Vietnamese than Chinese and Koreans, who were in turn greater than Japanese. The upper lip of Vietnamese is significantly closer to Ricketts' esthetic plane, than Chinese; Koreans and Japanese are significantly further behind the plane than Chinese. The lower lip of Koreans and Japanese was close to the esthetic plane, while Chinese and Vietnamese were approximately 2mm ahead. The nasolabial angle was significantly smaller for Chinese and Japanese than Koreans and Vietnamese. Sex differences were primarily dependent on the nose; total facial convexity and the nasolabial angle wert significantly larger in females than males. The results of this study demonstrate that a single standard of facial Profile is not sufficient or appropriate for Oriental patients.

• Food Science of Animal Resources
• /
• v.38 no.5
• /
• pp.1019-1028
• /
• 2018

The crust that inevitably forms on dry-aged beef is usually trimmed and discarded before sale. The aim of this study was to explore methods for utilizing this crust in processed meat products. Four sirloins were dry-aged for 28 d at $4^{\circ}C$ (75% relative humidity). The crust obtained from the surface of the sirloins after completion of dry aging was lyophilized. Patties were prepared without added crust (control) or with 5% w/w crust, aerobically packaged, and stored at $4^{\circ}C$ for 7 d. Electronic nose analysis indicated that the volatile profile differed significantly between the patties with and without crust. Compared to the control patties, patties containing crust had higher flavor, tenderness, juiciness, and acceptability scores in a sensory panel evaluation (all p<0.05). In addition, patties with crust were less hard, gummy, and chewy than the control patties after 3 and 7 d of storage (all p<0.05). The number of total aerobic bacteria was higher in raw patties with crust than in the control patties during the storage (p<0.05). However, no pathogens were detected. 2-Thiobarbituric acid reactive substance values of patties containing crust were significantly lower than those of control patties after 2 and 6 d of storage (both p<0.05). Thus, crust from dry-aged beef can enhance the flavor by providing beefy and palatable flavor without a long period of dry aging.

• Current Research on Agriculture and Life Sciences
• /
• v.30 no.1
• /
• pp.51-59
• /
• 2012

Fresh oyster mushrooms (Pleurotus ostreatus) were gamma-irradiated at 0, 1, 2, and 3 kGy. The effects on various quality attributes were determined during storage at $5{\pm}1^{\circ}C$. Color changes were more prominent in the cap region than the stem part. At the start of storage increase of Hunter's L-value (lightness) was observed in the caps of 2 and 3 kGy-irradiated samples. The L-value was higher in the all irradiated samples during storage. The trend was different in the case of stem region, where L-value decreased upon irradiation, but remained high throughout storage. The ${\alpha}$-value declined, whereas the b-value increased following irradiation. Irradiation showed a dose-dependent effect on the firmness, which was clearer during storage, but the samples irradiated at 1 kGy maintained an overall better texture than other irradiated samples. The weight loss was also higher in the all irradiated samples during storage. The samples irradiated at 1 kGy showed good physical appearance without any fungal attack at the end of storage; however color change in cap region was quite apparent. The ultra-structural drastic effect of irradiation was understandable using scanning electron microscopy. E-nose analysis demonstrated a clear change in the volatile profiles of all irradiated samples. Although the effect of irradiation on quality characteristics was quite clear but the all irradiated samples were free from fungal attack that was observed in the case of control sample.

• The Korean Journal of Food And Nutrition
• /
• v.36 no.6
• /
• pp.496-505
• /
• 2023

This study explored a method to enhance the drying process usability of local mangoes by producing foam-mat dried powder under varying drying temperatures (50, 60, 70℃) and foam thicknesses (3, 6, 9 mm). The drying process period ranged from 60 to 390 minutes based on the set conditions, with higher temperatures and thinner foams accelerating drying. Powder chromaticity (L^*,(L^*, a^*, and b^*) demonstrated a declining trend with increasing drying temperature and foam thickness, exhibiting notable variance in chroma values. The water absorption index varied significantly, between 3.08 to 4.24, under different drying conditions, although the water solubility index remained consistent across foam-dried samples. Powder moisture content ranged from 2.53% to 3.83%, with hygroscopicity escalating with temperature and foam thickness. Vitamin C structure was compromised during the hot air drying process, especially at temperatures above 60℃. Electronic nose analysis distinguished foam-dried powder from freeze-dried powder; however, a thicker foam yielded a scent profile closer to that of freeze-dried powder. The findings provide fundamental data on mango foam drying, which is expected to improve processing and storage tech for local mangoes.

• The korean journal of orthodontics
• /
• v.49 no.1
• /
• pp.3-11
• /
• 2019

Objective: The purpose of this study was to investigate the influence of heritability on the craniofacial soft tissue cephalometric characteristics of monozygotic (MZ) twins, dizygotic (DZ) twins, and their siblings (SIB). Methods: The samples comprised Korean adult twins and their siblings (mean age, 39.8 years; MZ group, n = 36 pairs; DZ group, n = 13 pairs of the same gender; and SIB group, n = 26 pairs of the same gender). Thirty cephalometric variables were measured to characterize facial profile, facial height, soft-tissue thickness, and projection of nose and lip. Falconer's method was used to calculate heritability (low heritability, $h^2$ < 0.2; high heritability, $h^2$ > 0.9). After principal components analysis (PCA) was performed to extract the models, we calculated the intraclass correlation coefficient (ICC) value and heritability of each component. Results: The MZ group exhibited higher ICC values for all cephalometric variables than DZ and SIB groups. Among cephalometric variables, the highest ${h^2}_{(MZ-DZ)}$ and ${h^2}_{(MZ-SIB)}$ values were observed for the nasolabial angle (NLA, 1.544 and 2.036), chin angle (1.342 and 1.112), soft tissue chin thickness (2.872 and 1.226), and upper lip thickness ratio (1.592 and 1.026). PCA derived eight components with 84.5% of a cumulative explanation. The components that exhibited higher values of ${h^2}_{(MZ-DZ)}$ and ${h^2}_{(MZ-SIB)}$ were PCA2, which includes facial convexity, NLA, and nose projection (1.026 and 0.972), and PCA7, which includes chin angle and soft tissue chin thickness (2.107 and 1.169). Conclusions: The nose and soft tissue chin were more influenced by genetic factors than other soft tissues.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.5
• /
• pp.515-524
• /
• 2022

The turnout system of the sleeper floating tracks (STEDEF) on urban transit is a Anti-vibration track composed of a wooden sleeper embedded in a concrete bed and a sleeper resilience pad under the sleeper. Therefore, deterioration and changes in spring stiffness of the sleeper resilience pad could be cause changes in sleeper support conditions. The damage amount of manganese crossings that occurred during the current service period of about 21 years was investigated to be about 17% of the total amount of crossings, and it was analyzed that the damage amount increased after 15 years of use (accumulated passing tonnage of about 550 million tons). In this study, parameter analysis (wheel position, sleeper support condition, and dynamic wheel load) was performed using a three-dimensional numerical model that simulated real manganese crossing and wheel profile, to analyze the damage type and cause of manganese crossing that occurred in the actual field. As a result of this study, when the voided sleeper occurred in the sleeper around the nose, the stress generated in the crossing nose exceeded the yield strength according to the dynamic wheel load considering the design track impact factor. In addition, the analysis results were evaluated to be in good agreement with the location of damage that occurred in the actual field. Therefore, in order to minimize the damage of the manganese crossing, it is necessary to keep the sleeper support condition around the nose part constant. In addition, by considering the uniformity of the boundary conditions under the sleepers, it was analyzed that it would be advantageous to to replace the sleeper resilience pad together when replacing the damaged manganese crossing.