• 한국연초학회지
• /
• 제22권2호
• /
• pp.170-175
• /
• 2000

This study was carried out to compare the quality of licorices from various cultivating areas. licorice samples used in this study were collected from North-east and Sinkiang area in China, Mongolia, Uzvekistan and Kazahstan. The chemical components of licorice samples were analyzed and the signal patterns of the electracts were detected by the electronic nose. Contents of glycyrrhizin and glicyrrhizic acid, the key components of licorice were distributed in the region of 16.7～25.2% and 5.8～10.2%, respectively and were various according to the samples of the collected areas. In glycyrrhizin contents, root of Sinkiang showed the lowest value of 16.7%, and that of North-east the highest of 25.2%. In glycyrrhizic acid contents, root of Sinkiang showed the lowest of 5.8 %, and Kazahstan showed the highest of 10.2 %. Composition ratio of glycyrrhizin to glycyrrhizic acid was not always limear. As other components is other components affecting quality, contents of ash, starch and gums were 2.4～3.7%, 0.2～3.9%, respectively. When the headspace volatiles of licorices were analyzed using Electronic Nose System and the obtained data were interpreted using statistical method of MANOVA, characteristic patterns of licorices were different from each other according to collected area and its p value showed 0.0001. These results suggest that licorices may be discriminated from the collected areas by using Electronic Nose System.

• 대한두개안면성형외과학회지
• /
• 제21권1호
• /
• pp.69-72
• /
• 2020

Hemangioma is a benign vascular tumor that grows by endothelial cell hyperplasia. It occurs most frequently in the head and neck region. Nose reconstruction is tricky because of its unique three-dimensional structure and different tissue components. We report a case of successful reconstruction of near-total nose defect using the paramedian forehead flap combined with a nasolabial flap, immediately after excision of nasal hemangioma. A 49-year-old male patient was presented with a huge mass at the nose. Preoperative magnetic resonance imaging showed prominent vascular channels extending to the forehead and cheek. Complete resection of the mass was performed, which resulted in an eccentric defect. The right paramedian forehead flap and the left nasolabial flap were designed and transferred to the defect. Flap division was performed 1 month later. The patient is satisfied with the overall appearance and did not develop any functional deficit.

• Structural Engineering and Mechanics
• /
• 제31권1호
• /
• pp.39-56
• /
• 2009

Vibration is an undesirable phenomenon in a dynamic system like lightly damped aerospace structures and active vibration control has gradually been employed to suppress vibration. The objective of the current investigation is to introduce an active torsional magneto-rheological (MR) fluid based damper for vibration control of a typical nose landing gear. They offer the adaptability of active control devices without requiring the associated large power sources. A torsional damper is designed and developed based on Bingham plastic shear flow model. The numerical analysis is carried out to estimate the damping coefficient and damping force. The designed damper is fabricated and an experimental setup is also established to characterize the damper and these results are compared with the analytical results. A typical FE model of Nose landing gear is developed to study the effectiveness of the damper. Open loop response analysis has been carried out and response levels are monitored at the piston tip of a nose landing gear for various loading conditions without damper and with MR-damper as semi-active device. The closed-loop full state feedback control scheme by the pole-placement technique is also applied to control the landing gear instability of an aircraft.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.282-291
• /
• 2010

In line with current speed-up of railroad, a slab track has been increasingly adopted in a bid to secure the safety of track structure as well as to reduce the maintenance cost, and furthermore, the need for commercialization of domestically-developed swing-nose crossing turnout on slab track has been on the rise. For commercialization of swing-nose crossing turnout on slab which was developed in Korea, a technical and systematic performance evaluation system, considering local environment, shall be established and then the performance evaluation shall be accordingly implemented. This paper was intended to summarize the performance evaluation system, referring to the data available at home and abroad and the results of performance evaluation for domestically-developed swing-nose crossing turnout on slab track carried out to date based on that system. A performance evaluation system comprises the technical requirement appropriateness evaluation(component performance evaluation and design verification), laboratory test and on-site test. For domestically-developed swing-nose crossing turnout on slab track, appropriateness evaluation and laboratory test have been completed and the on-site test of those installed on the 2nd phase of Kyung-Bu HSR is underway now.

• 센서학회지
• /
• 제27권4호
• /
• pp.227-231
• /
• 2018

Indoor air pollution has become a serious issue, affecting the health and comfort of building occupants. Volatile organic compounds (VOCs) are among the most common indoor contaminants, and are released from numerous indoor emission sources. Among the VOCs, formaldehyde and toluene are toxic chemicals at low levels and are frequently detected indoors. Exposure to formaldehyde and toluene can irritate sensitive tissue and may increase the risk of cancer. Therefore, monitoring formaldehyde and toluene is critical for the health and comfort of residents. In addition, as human indoor activities can generate VOC gases, analysis of their influence on VOCs is needed. In this study, we compared electronic nose (E-Nose) data for formaldehyde and toluene with E-Nose data for indoor mixture gas with consideration for human indoor activities.

• 한국환경보건학회지
• /
• 제32권5호
• /
• pp.412-417
• /
• 2006

A self-administrated non-malignant respiratory symptoms questionnaire was sent to 1,099 citizens who take subway running in Seoul city. Symptom prevalence rate was high: 70.6% of subjects reported 'chest tightness', 43.4%, 'dysphnea'; 76.2%, 'dry cough'; 49.5%, 'runny nose'; 94.4%, 'drowsiness' when they take subway. The groups responding significant higher respiratory and drowsiness symptoms were 'young passengers' (vs elderly passengers), 'the female' (vs male), 'using subway everyday' (vs often), 'using subway for rush-hour time' (vs other than rush-hour), 'using transfer subway' (no transfer), 'using underground track' (vs ground track). Logistic. regression model was employed to find personal and subway characteristics affecting non-malignant respiratory symptoms. This study concluded that respiratory diseases history such as asthma, rhinitis, sinusitis, hypersensitivity pneumonitis significantly affect 'dry cough' and 'runny nose'. Thus, passengers with respiratory diseases history shows 2.8 times greater 'dry cough' than and 3.4 times greater 'runny nose' than those passengers without respiratory diseases history felt. This results indicated that several measures have to take to protect sensitive groups such as passengers with respiratory diseases, children and elderly people. Also passenger who use to transfer shows 1.7 times higher runny nose symptoms than that passenger who do not transfer felt.

• 소성∙가공
• /
• 제16권8호
• /
• pp.582-589
• /
• 2007

This paper is related to an analysis on the surface expansion in backward can extrusion process using spherical punches. It is generally known that the backward can extrusion process usually experiences severe normal pressure and heavy surface expansion. This is a reason why the backward can extrusion process is one of most difficult operations among many forging processes. Different punch nose radii have been applied to the simulation to investigate the effect of punch nose radius on the surface expansion, which is a major effort in this study. AA 2024 aluminum alloy is selected as a model material for investigation. Different frictional conditions have also been selected as a process parameter. The pressure applied on the punch has been also investigated since heavy surface expansion as well as high normal pressure on the tool usually leads to severe tribological conditions along the interface between material and tool. The simulation results are summarized in terms of surface expansion at different reduction in height, deformation patterns including strain distributions and maximum pressure exerted on the workpiece and punch, the effect of punch nose radius and the frictional condition on the surface expansion and the location and magnitude of maximum pressure exerted, respectively.

• 동아시아식생활학회지
• /
• 제18권1호
• /
• pp.14-21
• /
• 2008

Flavor is one of the most important factors for determining wine characteristics and quality. Flavor pattern of wines(brewed from America, France, Italy, Chile, and Australia) was analyzed by the electronic nose that is equipped with 12 metal oxide sensors. In the results, the flavor pattern of wines was discriminated according to their origins by the principal component analysis(PCA). Each proportion of the first principal component score in the PCA plot was 94.79%(America), 73.62%(France), 99.06%(Italy), 96.74%(Chile), and 96.53%(Australia), respectively. Consequently, the imported wines could be practically differentiated into one from the other origins by volatile properties, suggesting that electronic nose could be successfully used for easy screening and quality evaluation of wines.

• 농업과학연구
• /
• 제38권4호
• /
• pp.761-767
• /
• 2011

The objective of this study was to predict total bacteria count of pork meats by using the portable electronic nose systems developed throughout two stages of the prototypes. Total bacteria counts were measured for pork meats stored at $4^{\circ}C$ for 21days and compared with the signals of the electronic nose systems. PLS(Partial least square), PCR (Principal component regression), MLR (Multiple linear regression) models were developed for the prediction of total bacteria count of pork meats. The coefficient of determination ($R_p{^2}$) and root mean square error of prediction (RMSEP) for the models were 0.789 and 0.784 log CFU/g with the 1st system for the pork loin, 0.796 and 0.597 log CFU/g with the 2nd system for the pork belly, and 0.661 and 0.576 log CFU/g with the 2nd system for the pork loin respectively. The results show that the developed electronic system has potential to predict total bacteria count of pork meats.

• 한국식품과학회지
• /
• 제35권4호
• /
• pp.648-652
• /
• 2003

본 실험은 순수참기름과 혼합참기름의 구별 및 순도판별을 용이하게 하기 위한 분석방법을 제시하고자 실행되었다. 순수참기름과 옥수수기름을 95 : 5, 90 : 10, 80 : 20(w/w)의 비율로 각각 비율을 달리해서 혼합참기름을 제조한 후 GC, SPME-GC/MS, 전자코를 이용한 분석을 실시하였다. 지방산조성(mole%)을 비교한 결과 옥수수기름이 10%이상 함유된 혼합참기름과 순수참기름 간에는 stearic acid와 linoleic acid의 함량의 변화로 구별이 가능하였으나 5%내로 옥수수유가 함유된 혼합참기름과 순수참기름과의 구별은 용이하지 않았다. 향기성분동정을 위해 SPME-GC/MS 분석을 실시한 결과순수참기름과 혼합참기름은 같은 향기성분 패턴을 보여 구별하기 어려웠다. 반면, MOS 유형의 전자코를 이용하여 향기성분패턴 분석결과 제1주성분 값의 기여율이 98.76%로 구별이 가능하였으며 이로써 신속하고 편리하게 비파괴적 분석 방법인 전자코를 활용하여 순수참기름과 혼합참기름을 구별할 수 있었다.