• 제목/요약/키워드: Normal wave condition

검색결과 61건 처리시간 0.019초

Experimental study on wave forces to offshore support structures

  • Jeong, Youn-Ju;Park, Min-Su;You, Young-Jun
    • Structural Engineering and Mechanics
    • /
    • 제60권2호
    • /
    • pp.193-209
    • /
    • 2016
  • In this study, wave force tests were carried out for the four types of offshore support structures with scale factor 1:25 and wave forces to the support structure shapes were investigated. As the results of this study, it was found that, as the wave period increased at the normal wave condition, wave force decreased for the most cases. Extreme wave force was affected by the impact wave force. Impact wave force of this study significantly effect on Monopile and slightly on GBS and Hybrid type. Accordingly, Hybrid type indicated even lower wave force at the extreme and irregular wave conditions than the Monopile although Hybrid type indicated higher wave force at the normal wave condition of the regular wave because of the larger wave area of wave body. In respects of the structural design, since critical loading is extreme wave force, it should be contributed to improve structural safety of offshore support structure. However, since the impact wave force has nonlinearity and complication dependent on the support structure shape, wave height, wave period, and etc., more research is needed to access the impact wave force for other support structure shapes and wave conditions.

완도 해역의 해수면 조건에 따른 파랑 변형 특성 (Characteristics of Wave Propagation by Water Level Conditions at Wando Sea Area: Numerical Modeling)

  • 전용호;윤한삼;김동환;김원석;김헌태
    • 수산해양교육연구
    • /
    • 제25권1호
    • /
    • pp.1-11
    • /
    • 2013
  • The aim of this study was estimated the characteristics of the wave propagation by the water level conditions using a numerical modeling method at the Wando sea area. For three cases numerical simulation on the condition of incident and incoming of the deepwater design wave and the season normal wave, the spatial distribution of the incident wave at study area were investigated. And the calculated numerical modeling results were compared with measured field wave data. According to on-site wave data measured for 18 days, the range of the significant wave height and period were 0.10~1.14 m, 4.35~8.74 sec, respectively, and the maximum wave height were 0.15~1.66 m. From the results of numerical model for offshore design wave incident, the wave height attacked from Southern-East direction at this study area were over maximum 10.5 m because of rapidly change of water depth. Numerical modeling by three water level conditions of Approxmate Lowest Low Water Level(Approx. L.L.W), Mean Sea Level(M.S.L) and Approximate Highest High Water Level(Approx. H.H.W) were practiced. From the results for the case of Approx. H.W.L, variations of wave height at the back area of islands were about 1.6 m at maximum value for the case of deepwater design wave incoming. The significant wave heights of winter season were bigger than summer under normal wave condition, the incident wave height over 5.5 m decreased by shielding effect of islands. The change of maximum wave height at summer season were distinct than winter and was about 1.2 m and 0.8 m, respectively.

항주파 관측에 관한 연구 (A Study on the Measurement of Ship Wave)

  • 정대득
    • 해양환경안전학회지
    • /
    • 제14권4호
    • /
    • pp.297-301
    • /
    • 2008
  • 선박의 항주에 의해 발생하는 항주파의 현장관측을 수행하였다. 파랑데이터는 선박의 항로에서 625m 이격된 지점에서 초음파식 파고계를 이용하여 12시간동안 5Hz로 관측하였다. 관측데이터 분석결과 이 해역의 파랑은 정상적인 기상상태에서는 항주파가 현저한 원인으로 분석되었으며, 대형여객선과 쾌속여객선의 항주파가 중첩될 때 최대파고 82.6cm로 관측되었다. 불규칙하지만 현저한 방향특성을 가지는 개방수역의 풍파와 비교하여 항내의 항주파는 매우 복잡한 형태를 나타냈다.

  • PDF

항주파 관측에 관한 연구 (A Study on the Measurement of Ship wave)

  • 정대득
    • 해양환경안전학회:학술대회논문집
    • /
    • 해양환경안전학회 2007년도 추계학술발표회
    • /
    • pp.29-33
    • /
    • 2007
  • 선박의 항주에 의해 발생하는 항주파의 현장관측을 수행하였다. 파랑데이터는 선박의 항로에서 625m 이격된 지점에서 초음파식 파고계를 이용하여 12시간동안 5Hz로 관측하였다. 관측데이터 분석결과 이 해역이 파랑은 정상적인 기상상태에서는 항주파가 현저한 원인으로 분석 되었으며, 대형여객선과 쾌속여객선의 항주파가 중첩될 때 최대파고 82.6cm로 관측되었다. 불규칙하지만 현저한 방향특성을 가지는 개방수역의 풍파와 비교하여 항내의 항주파는 매우 복잡한 형태를 나타냈다.

  • PDF

BLOW-UP RATE FOR THE SEMI-LINEAR WAVE EQUATION IN BOUNDED DOMAIN

  • Liang, Chuangchuang;Wang, Pengchao
    • 대한수학회보
    • /
    • 제52권1호
    • /
    • pp.173-182
    • /
    • 2015
  • In this paper, the blow-up rate of $L^2$-norm for the semi-linear wave equation with a power nonlinearity is obtained in the bounded domain for any p > 1. We also get the blow-up rate of the derivative under the condition 1 < p < $1+\frac{4}{N-1}$ for $N{\geq}2$ or 1 < p < 5 for N = 1.

어항의 항내 정온도 평가사례 및 개선방안 (Improvement of the Estimation Method for Harbor Tranquility of Fishery Harbor)

  • 탁대호;김귀영;전경암;이대인
    • 해양환경안전학회지
    • /
    • 제21권6호
    • /
    • pp.637-644
    • /
    • 2015
  • 항내 정온도 평가는 이상파 및 평상파 조건에 대해 수행이 되어야 하나, 어항개발 시 이루어지는 평가는 이상파에 대해서만 수행되고 있다. 축산항, 교암항, 궁평항 및 시산항에 대한 사례를 통해 해역이용협의 시 정온도 평가에 대한 실태를 분석하였다. 대상항 모두 이상파에 대한 항내 정온도를 평가를 수행하였으나, 목표 정온도를 만족하지 못하였다. 평상파에 대한 정온도는 가동률로 평가하며, 가동률을 평가하기 위해서는 장기간의 파랑관측이 필요하나 수행되지 않고 있었다. 가동률에 대한 평가는 계획의 적정성과 관련 있는 평가항목이기 때문에 개발로 인한 해양환경에 미치는 악영향을 최소화할 수 있는 계획의 수립과 어업인들의 정주환경 개선을 평가하기 위해서는 수행이 필요하다. 정온도 평가를 위해서는, 정온도 평가에 대한 이해가 선행되어야 하고, 장기간의 파랑관측이 수행되어야 하며, 평상파 및 이상파에 대한 평가절차를 명확히 해야 한다. 그리고 실효적인 계획이 수립될 수 있도록 조석정보와 같은 파랑정보의 제공 및 정온도를 평가할 수 있는 가이드라인의 수립이 필요하다.

색각 시표에 따른 시피질 뇌파의 반응 상태 (Response State of EEG Wave Type on Visual Cortex According to Color Vision Target)

  • 김덕훈
    • 한국안광학회지
    • /
    • 제5권2호
    • /
    • pp.5-9
    • /
    • 2000
  • 시유발전위는 시피질 뇌파의 반응을 알 수 있는 전기 생리학적인 검사법이다. 이 검사는 눈의 기능을 타각적으로 검사하는 검사법이다. 본 연구는 색각에 대한 객관적인 검사를 위해 시유발전위를 사용하였다. 검사조건은 거리와 조명의 차이를 다르게 한 상태에서 실시하였다. 피검자는 한국인 성인으로 정상색각자를 대상으로 하였다. 수렴운동 상태에서 색각의 시표적에 따라서 시자극에 관계하는 시피질의 뇌파의 빈도는 델타파가 가장 많고, 다음으로 메타파, 세타파 그리고 알파파의 순으로 나타났다. 뇌파의 진폭에 대한 히스토그램은 거의 비정규분 포곡선을 가지며, 위상 분석에서는 대게 선형을 나타내었다. 시표의 종류에 따른 뇌파의 빈도는 비슷한 결과를 나타내었다.

  • PDF

Theoretical formulations of current and unique Rayleigh waves with impedance boundary condition embedding normal stress

  • Nguyen, Xuan Quynh;Lee, Dongkyu
    • Smart Structures and Systems
    • /
    • 제29권2호
    • /
    • pp.279-286
    • /
    • 2022
  • In this article, a novel propagation formulation of Rayleigh waves in a compressible isotropic half-space with impedance boundary condition is proposed by embedding the normal stress. In a two-dimensional case, it is assumed that a design boundary is free of normal traction and a shear traction depends on linearly a normal component of displacements multiplied by frequencies. Therefore, impedance boundary conditions affect the normal stress, where the impedance parameters correspond to dimensions of stresses over velocity. On the other hand, vanished impedance values are traction-free boundary conditions. The main purpose of this article is to present theoretically the existence and uniqueness of a Rayleigh wave formulation relying on secular equation's mathematical analyses. Its velocity varies along with the impedance parameters. Moreover, numerical experiments with different values for the velocity of Rayleigh waves are carried out. The present Rayleigh waves study is a fundamental step in analyzing the cause and effect of physical states such as building or structure damages resulting from natural dynamics. The results of the study generate a basic design formulation theory to test the effects of Rayleigh waves affecting structures when an earthquake occurs. The presence and uniqueness of the proposed formulation is verified by mutual comparisons of several numerical examples.

퍼지제어기를 이용한 초음파 모터의 온도특성에 관한 연구-주파수 제어 (A study on the characteristic or temperature for Ultrasonic Motor using Fuzzy Controller - with frequency control)

  • 서기열;차인수;박해암;최장균
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1996년도 하계학술대회 논문집 A
    • /
    • pp.597-599
    • /
    • 1996
  • This paper describes the bending traveling-wave type ultrasonic motor which generates the traveling wave by combining two standing waves with phase difference time and space. In $+20^{\circ}C{\sim}30^{\circ}C$, the USM motor operation character has represented normal condition. But the other temperature, (that is say, when long time operating condition) USM operation characteristic has abnormal condition, that is driving frequency, drive current and r.p.m is down. The recent USM has controller without temperature compensation. This study aimed at fuzzy controller which must follow the frequency at operation temperature and then r.p.m and torque increase.

  • PDF

퍼지제어기를 이용한 초음파 모터의 온도특성에 관한 연구 - 위상차 제어 (A Study on the characteristic of temperature for Ultrasonic Motor using Fuzzy Controller - with phase angle difference control)

  • 서기열;차인수;윤형상;유권종
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 1996년도 창립기념 전력전자학술발표회 논문집
    • /
    • pp.52-55
    • /
    • 1996
  • This paper describes the bending traveling-wave type ultrasonic motor which generates the traveling wave by combining two standing waves with phase difference time and space. In $+20^{\circ}C$~$30^{\circ}C$, the USM motor operation character has represented normal condition. But the other temperature, (that is say, when long time operating condition) USM operation characteristic has abnormal condition, that is driving frequency, drive current and r.p.m is down. The recent USM has controller without temperature compensation. This study aimed at fuzzy controller which must follow the phase angle difference 90$^{\circ}$at operation temperature and them r.p.m and torque increase.

  • PDF