• Clinical Pain
• /
• 제18권2호
• /
• pp.126-129
• /
• 2019

Bilateral femoral neck stress fractures have been rarely reported. When diagnosed, they are usually limited to athletes or military personnel. A 35-year-old man, previously healthy, visited the emergency department for right inguinal pain. On physical examination, no external wound, tenderness or limitation of motion were found in either lower extremity. Plain radiography showed normal findings but an magnetic resonance image showed a linear fracture in the femoral neck. In this case, bilateral femoral neck stress fractures were found in a young non-athlete adult with no prior medical history of related injuries. Surgery is generally not performed for stress fractures but considering the patient's early mobilization and the need for quick reintegration into society, surgery was done in this case.

• 한국융합학회논문지
• /
• 제11권10호
• /
• pp.377-385
• /
• 2020

본 연구는 신체를 왜곡되게 인지하고 있는 청소년의 성별에 따른 정서 관련요인을 파악하기 위한 목적으로 시행되었으며 제 15차(2019년) 청소년건강행태온라인조사 자료를 이차 분석한 연구이다. 본 연구의 대상자는 제 15차(2019년) 청소년건강행태온라인조사 전체 대상자 중 정상체질량 지수임에도 불구하고 자신의 체형을 살이 찐 편이라고 인지한 13-18세 청소년 9,635명으로 남자 3,640명과 여자 5,995명이었다. 주요 분석방법은 신체인지왜곡을 가진 청소년의 성별에 따른 정서와 일반적, 신체적 및 심리적 요인간의 관계는 복합표본통계의 로지스틱 회귀분석을 통해 분석하였다. 주요 결과는 패스트푸드를 많이 섭취할수록 남녀 모두 스트레스와 슬픔과 절망감이 높았으며 대부분 유의하였다(p<.05). 또한 신체활동을 안하는 경우 남녀 모두 스트레스를 더 받았으며 슬픔과 절망감은 신체활동을 안하는 경우 더 적게 인지하는 것으로 나타났다(p<.05). 본 연구결과는 신체인지 왜곡 청소년을 위한 중재 개발에 기초자료로 활용될 수 있다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제35권7호
• /
• pp.930-937
• /
• 2011

The characteristics of mean velocity and turbulence have been analyzed in the circular open channel flow using PIV measurement data for a wide range of water depth. The measured data are fitted to a velocity distribution function over the whole depth of the open channel. Reynolds shear stress and mean velocity in wall unit are compared with the analytic models for fully-developed turbulent boundary layer. Both the mean velocity and Reynolds shear stress have different distributions from the two-dimensional boundary layer flow when the water depth increases over 50% since the influence of the side wall penetrates more deeply into the free surface. The cross-stream Reynolds normal stress also has considerably different distribution in view of its peak value and decreasing rate in the outer region whether the water depth is higher than 50% or not.

• 전기학회논문지P
• /
• 제57권3호
• /
• pp.332-337
• /
• 2008

We analyzed carbonization pattern and crystal structure of polyvinyl chloride wire by thermal stress. Copper that is oxidized at normal temperature is a reddish brown. If under the thermal stress range of 500 to 700 [$^{\circ}C$], carbonization and exfoliation occurrence. Section structure of electric wire is same as arrangement of particle in metallograph analysis. But, as thermal stress increases, size of particle is enlarged. Electric wire displays elongation structure in SEM image analysis and elongation structure collapses when receive thermal stress at 300 [$^{\circ}C$]. In EDX analysis, we get the spectra of CuL, CuK, OK, and ClK. FT-IR analysis was shown new spectra with in range of $1,440{\sim}1,430\;[cm^{-1}]$, 1,340 [$cm^{-1}$], 1,240 [$cm^{-1}$].

• 터널과지하공간
• /
• 제4권3호
• /
• pp.274-286
• /
• 1994

Direct shear tests were on ducted in a laboratory setting in order to investigate the shear strength and deformation behavior of rock joints. Also, the characteristics of acoustic emissions (AE) during shearing of rock joints were studied. The artificial rock joints were created by splitting the intact blocks of Hwangdeung granites and Iksan marbles. Joint roughness profiles were measured by a profile gage and then digitized by Image analyzer. Roughness profile indices(Rp) of the joints were calculated with these digitized data. Peak shear strength, residual shear strength, shear stiffness and maximum acoustic emission(AE) rate were investigated with joint roughness. The peak shear strenght, the residual shear strength and the shear stiffness were increased as roughness popfile index or normal stress increased in the shear tests of granites. In the tests of marble samples, the shear deformation characteristics were not directly affected by joint roughness. As the result of two directional shear tests, the shear characteristics were varied with shear direction. AE count rates were measured during the shear deformation and the AE signals in several stages of the deformation were analyzed in a frequency domain. The AE rate peaks coincided with the stress drops during the shear deformation of joint. The dominant frequencies of the AE signals were in the vicinity of 100 kHz fo rgranite sample and 900 kHz for marble samples. The distribution of amplitude was dispersed with increasing normal stress.

• Computers and Concrete
• /
• 제33권1호
• /
• pp.41-53
• /
• 2024

Under constant and cyclic axial compression, square composite short columns reinforced with Self Compacting Concrete (SCC) added with scrap rubber infilled inside steel tubes and with different types of concrete were cast and tested. The test is carried out to find the effectiveness of utilizing an aggregate manufactured from industrial waste and to address the problems associated with the need for alternative reinforcements along with waste management. The main testing parameters are the type of concrete, the effect of fiber inclusion, and the significance of rubber-infilled steel tubes. The failure modes of the columns and axial load-displacement curves of the steel tube-reinforced columns were all thoroughly investigated. According to the test results, all specimens failed due to compression failure with a longitudinal crack along the loading axis. The fiber-reinforced column specimens demonstrated improved ductility and energy absorption. In comparison to the normal-weight concrete columns, the lightweight concrete columns significantly improved the axial load-carrying capacity. The addition of basalt fiber to the columns significantly increased the yield stress and ultimate stress to 9.21%. The corresponding displacement at yield load and ultimate load was reduced to 10.36% and 28.79%, respectively. The precision of volumetric information regarding the obtained crack quantification, aggregates, and the fiber in concrete is studied in detail through image processing using MATLAB environment.

• 대한핵의학회지
• /
• 제25권2호
• /
• pp.192-199
• /
• 1991

Peripheral arterial disease, because of it's significant and prolonged morbidity and related mortality is a major medical and surgical problem. Contrast angiogram remains the essential standard for the anatomic demonstration of disease. It does not, however, provide data suitable for quantification or any evaluation of the microcirculation. For these reasons, radionuclide studies are playing an increasingly important role by not only confirming the diagnosis and offering objective data on the physiologic significance of anatomic lesions, but by offering prognosis of healing and prediction of therapeutic results. In addition, radionuclide procedures offer means to safely and repeatedly monitor response to therapy and long term follow up. The object of this study was to evaluate the clinical availability of $^{201}T1$ perfusion scan in patients with peripheral arterial diseases. We performed $^{201}T1$ perfusion scans in patients with five Buerger' s disease (10 legs), six DM gangrenes (12 legs) and classified three perfusion pattern groups. Finally we compared treatment modalities among each groups and compaired T1-201 perfusion scan findings with angiographic findings in six patients with Buerger's disease. The results were as follows: 1) Seven legs showed increased perfusion in stress image and normal or increased perfusion in resting image (type 1). Six legs showed decreased perfusion in stress image and improved in resting image (type II). Of total 13 legs, only 1 leg needed to amputation. 2) Three legs showed decreased perfusion in stress and resting image (type III), and subsequently all cases were received surgical amputation. 3) In six Buerger's disease patients, there were disagreements in two patients (2 legs) between $^{201}T1$ scan and angiography, in which angiograms were normal but $^{201}T1$ scans showed 'type II' perfusion patterns.

• 한국가시화정보학회:학술대회논문집
• /
• 한국가시화정보학회 2005년도 추계학술대회 논문집
• /
• pp.17-22
• /
• 2005

An experimental study was carried out to investigate the effect of local ultrasonic forcing on a turbulent boundary layer. Stereoscopic particle image velocimetry (SPIV) was used to probe the characteristics of the flow. A ultrasonic forcing system was made by adhering six ultrasonic transducers to the local flat plate. Cavitation which generates uncountable minute air-bubbles having fast wall normal velocity occurs when ultrasonic was projected into water. The SPIV results showed that the wall normal mean velocity is increased in a boundary layer dramatically and the streamwise mean velocity is reduced. The skin friction coefficient ($C_{f}$) decreases $60\%$ and gradually recovers at the downstream. The ultrasonic forcing reduces wall-region streamwise turbulent intensity, however, streamwise turbulent intensity is increased away from the wall. Wall-normal turbulent intensity is almost the same near the wall but it increases away from the wall, In tile vicinity of the wall, Reynold shear stress, sweep strength and production of turbulent kinetic energy were decreased. This suggests that the streamwise vortical structures are lifted by ultrasonic forcing and then skin friction is reduced.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.438-444
• /
• 2003

A new method to measure residual stress in micron and nano scale films is described. In the theory it is based on Linear Elastic Fracture Mechanics. And in the techniques it depends on the combined capability of the focused ion beam (FIB) imaging system and of high-resolution digital image correlation (DIC) software. The method can be used for any film material (whether amorphous or crystalline) without thinning the substrate. In the method, a region of the film surface is highlighted and scanning electron images of that region taken before and after a long slot, depth a, is introduced using the FIB. The DIC software evaluates the displacement of the surface normal to the slot due to the stress relaxation by using features on the film surface. To minimize the influence of signal noise and rigid body movement, not a few, but all of the measure displacements are used for determining the real residual stress. The accuracy of the method has been assessed by performing measurements on a nano film of diamond like carbon (DLC) on glass substrate and on micro film of aluminum oxide thermally grown on Fecrally substrate. It is shown that the new method determines the residual stress ${\sigma}_R=-1.73$ GPa for DLC and ${\sigma}_R=-5.45$ GPa for the aluminum oxide, which agree quite well with ones measured independently.

• 대한전자공학회논문지
• /
• 제22권4호
• /
• pp.101-112
• /
• 1985

움직이는 물체의 영상으로부터 그 물체의 운동을 해석하는 것은 매우 중요하다. 본 논문에서는 X-ray 영상을 이용하여 심장운동을 해석하는 알고리즘에 관하여 연구하였다. 관상동맥 혈관조영상을 이용하여 심장운동에 따른 국부적인 심근표면(Epicardial)의 변형과 심근두께의 변화 그리고 이에 작용하는 원주 방향 및 길이 방향의 응력을 추정하는 새로운 수학적인 방법을 개발하였다. 이 새로운 방법에서는 관상동맥의 분지점 영상의 시간에 따른 위치 변화를 심장운동 해석의 기본 data로 사용하였다. 4마리 개과 1사람의 관상동맥 조영상을 이용한 실제 실험결과로 부터 본 논문의 방법이 납으로 만든 marker를 붙여 얻은 결과와 비교하여 볼때 타당성이 있음을 알 수 있었다. 따라서 이 방법을 이용하면 관상동맥 혈관조영상으로 부터 기존의 혈관상태에 관한 정보 이외에도 국부 심근운동에 따른 변형 및 응력(stress)을 얻을 수 있게 된다.