• Journal of Korea Port Economic Association
• /
• v.32 no.4
• /
• pp.41-56
• /
• 2016

China is pushing a policy called China's Western Development in order to balance the continent's development level. They are connecting the rich natural resources of the mid-western areas and the capital of the eastern coastal areas of China. Since Korea depends on China the most for trade, it is necessary for Korea to always consider the trade scale and pattern changes of China. Response to changes in the transport and logistics system between the two countries is also demanded. This study aims to analyze the import and export trends between Korean and Chinese provinces of each item from the trade scale point of view. China's global trade routes reorganization and China's western development are considered and the corresponding direction is presented accordingly. The study also suggests strategies to expand the import and export scale with China based on the analysis.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.3 no.2 s.9
• /
• pp.111-118
• /
• 2003

Korea High-Speed Railway has various safety systems to secure safe and stable transportation and makes assurance doubly sure to minimize casualty and property damage caused by natural disasters. But, there is no regulation that reflects domestic railway line, climate, topographical and geological characteristic in introducing the foreign regulations yet. Therefore, it is necessary for us to modify a regulation which is suitable to domestic high-speed railway. In this study, it is possible to establish more reasonable boundary rainfall by grasping and improving the troubles with existing boundary rainfall that is scheduled to be utilized for high-speed rail-transport operation control under rainfall. Also, it is possible to insure the safety of train by four steps such as 'normal operation', 'warning issue', 'train speed control' and 'train stop' using the established boundary rainfall. It will go far toward minimizing the occurrence of natural disasters.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.18 no.2_spc
• /
• pp.275-289
• /
• 2020

In 2017, multimodal transportation tests for evaluating road, sea, and rail transport were performed by research institutes in the US, Spain, and the Republic of Korea. In this study, acceleration and strain data determined through road and sea tests were analyzed. It was investigated whether the load generated for each transport mode was amplified or attenuated according to the load transfer path. From the results, it was confirmed that the load transfer characteristics differed according to the transportation mode and loading path. The effects of strain determined through each test on the structural integrity of the spent nuclear fuel were also investigated. It was found that the magnitude of the measured strain had a negligible effect on the structural integrity of the spent nuclear fuel, considering its fatigue strength. The results for the acceleration and strain data analyses obtained in this study will be useful for scheduled domestic transportation tests under normal transport conditions.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.31-38
• /
• 2008

This Study discussed the roll forming process analysis of levitation rail for urban Maglev vehicle. To verify validity of roll forming process, we analyzed roll forming process for track shoe which is similar to levitation rail. The analysis process was composed of 12 passes and was performed for only 8 passes except overlapping passes. In the variation of temperature with each pass, surface temperature of the structure was cooled from initial $1200^{\circ}C$ to $1010^{\circ}C$ during 30 second before first pass, and central temperature and surface temperature was cooled to $980^{\circ}C$ and $900^{\circ}C$ in final pass, respectively. A length of structure after final pass is about 5 times longer than that before roll forming process. A strain of structure had a higher value in the inner part of the track shoe and show from minimum 2.5 to maximum 6.5. A torque applying on roll appear high in 2, 3 and 4 passes and a maximum value was $27,000ton{\cdot}mm$. Also it was analyzed that a load to the normal direction needs maximum 300ton.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.220.2-220.2
• /
• 2011

Biodiesel and biodiesel blend fuel are receiving increasing attention as alternative fuels for diesel engines without substantial modifications. Biodiesel fuels and blending have been widely studied and applied in diesel engine because of biodiesel's lower sulfur, lower aromatic hydrocarbon and higher oxygen content. Biodiesels have the potential to be oxidized in different condition. It has reported that oxidation deterioration of biodiesel is different in the condition of storage and oxidation causes chemical property change of methyl esters. Sunlight intensity, temperature, material of container and contact surface with oxygen are key dominant factors accelerating oxidation deterioration. In this study, we chose temperature among key oxidation conditions and metal container filled with biodiesel was heated at about $110^{\circ}C$ for 10 days in order to accelerate oxidation deterioration. To better understand the effect of biodiesel blends on emission, steady state tests were conducted on a heavy duty diesel engine. The engine was fueled with Ultra Low Sulphur Diesel(ULSD), a blend of 10% and 20%(BD10, BD20) on volumetric basis, equipped with a common rail direct injection system and turbocharger, lives up to the requirements of EURO 3. The experimental results show that the blend fuel of normal biodiesel with BD10 and BD20 increased NOx. The result of PM was similar to diesel fuel on BD10, but the result of PM on BD20 was increased about 63% more than its of diesel. The blend fuel of Oxidation biodiesel with BD10 and BD20 increased NOx as the results of normal biodiesel. But PM was all increased on BD10 and BD20. Especially THC was extremely increased when test fuel contains biodiesel about 140% more than its of diesel. Through this study, we knew that oxidation deterioration of biodiesel affects emission of diesel engine.

• Journal of the Korean Society for Railway
• /
• v.19 no.1
• /
• pp.97-108
• /
• 2016

Over 80% of Korea's cargo transport relies on public roads. Such over-reliance has created a range of social problems including environmental damage. Korea thus faces an urgent need to establish an alternative mode of cargo transportation. In view of the changing international logistics environment, railway is clearly a superior mode of transport. The prerequisite task today for Korea is to enhance the competitiveness of inland railway by switching to railway and spurring new demand for cargo. This study examines inland railway cargo transport from the demand perspective. Specifically, through the use of a survey, the study identifies key factors influencing the decisions of container shippers regarding the use of railway for cargo transport. The survey responses were statistically tested using Smart PLS structural equation modeling. The results indicate that attitude toward railway use had the strongest influence on choice, while the key variable affecting attitude formation was cost.

• Journal of the Korean Society for Railway
• /
• v.20 no.2
• /
• pp.223-233
• /
• 2017

The railway turnout system is one of the most important systems that set train routes. Turnout system integrity should be guaranteed for robust train operation. To diagnose the turnout system status, LVDT and accelerometers are installed on a turnout system in a high speed line. The LVDT and accelerometers produce signals containing physical meaning of the turnout systems. The LVDT produces the displacement of the rail gauge and vibration when point moving or a train passes on turnout systems and the accelerometer produces impact forces induced by wheel sets. We performed data extraction from the measured signals and parameterized the extracted signals into meaningful quantities. The parameters are used for classifying whether the turnout status is normal. We proposed two methods for the classification, one uses probabilistic distribution and the other artificial neuron networks. The probabilistic distribution is used for the parameter being classified by the quantities and the artificial neuron networks for the form classification. Finally, we show how to learn the normal status of a turnout system.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.1080-1084
• /
• 2011

Urban maglev should have such characteristics as not only environmentally friendliness and excellent driving capability but also curve negotiation performance because its routes have many sharp curves. Due to normal mechanism of urban maglev its relative displacements of secondary spring are bigger than conventional railway vehicle and the centering force of levitation magnet is smaller than wheel-on-rail system. These features of maglev affect the curving negotiation and so the additional steering device is to be required on Urban maglev to improve the running performance at sharp curve of less than about R50m. Some developed urban maglev had the passive steering device which consists of mechanical linkage or hydraulic cylinder and closed-route piping. But it has drawback as complexity of layout of understructure of vehicle and functional limitation of passive mechanism regarding transient curve. These demerits could be solved by using active steering system. But it has a weak point that an active device should have actuators and additional inverter or hydraulic power source. In this paper, the semi-active steering system for urban maglev is to be introduced.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.793-799
• /
• 2011

A comprehensive analysis of wheel force spectrum is conducted to provide the KTX safety evaluation with structural behaviour of Pre-Stressed Concrete (PSC) box bridge due to various high speeds. The wheel spectrum for KTX locomotive running over road and PSC bridge tracks is compared using irregular track responses with numerical models of 170m approach road track and 40m span length of PSC box bridge The high-speed railway locomotive is used as 38-degree of freedom system. Three displacements (vertical, lateral, and longitudinal) and three rotational components (pitching, rolling, and yawing) for one car-body and two bogies are considered in the 38-degree of freedom model. Three dimensional frame element of finite element method (FEM) is used to model of the simply supported PSC box bridge. The irregulation of rail-way is derived using the experiential spectrum density function under assumption of twelve level tracks conditions based on the normal probability procedure. The dynamic analyses by Runge-Kutta method which are able to analyze the high frequency wheel force spectrum. A dynamic behaviour of KTX due to high speeds until 450km/h developing speed with relative time is analysed and compared the characteristics running over the road and PSC box bridge tracks. Finally, the KTX integrated evaluation method of safety between high speed train and bridge is presented.

• Journal of the Korea Society for Simulation
• /
• v.28 no.4
• /
• pp.11-20
• /
• 2019

This paper presents a HILS(Hardware-In-the-Loop Simulation) approach for the verification of the OHT (Overhead Hoist Transport) controller in a semiconductor FAB. Since hundreds of OHTs can run simultaneously on the OHT network of a FAB, the full verification of the OHT controller is very essential to guarantee the stableness of the material handling system. The controller needs to fully consider not only normal situations but also abnormal situations that are difficult to predict. For the verification of the controller, we propose a HILS approach using a virtual environment including OHTs on a rail network, which can generate abnormal situations. The proposed HILS approach has been implemented and tested with various examples.