• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2006년 제4회 한국유체공학학술대회 논문집
• /
• pp.269-272
• /
• 2006

The heat and smoke which generated by subway under fire is one of the most harmful factor in air tighten underground station. To prevent this, Trackway Exhaust System(TES) can be used. The heat released from the train running in the tunnel raises the temperature at the platform and the trackway, and thus proper ventilation system is required for comfortable underground environment. When the fire is occurred, TES is operated as smoke exhaust mode from normal ventilation mode. In the present study, the subway station which is one of the line number 9 in Seoul subway is modeled, and fired situation is simulated with several ventilation mode of ventilation system in trackway. For this simulation whole station is modeled. Non steady state 3D simulation which considered train under fire is entering to the station is performed. Temperature and smoke distribution in platform and trackway are compared. To represent heat by fire, heat flux was given to the fired carriage, also to describe smoke by fire, concentration of CO is represented. As the result of present study, temperature and smoke distribution is different as the method of ventilation in trackway and platform is changed. In over side of trackway, the fan must be operated as exhaust mode for efficient elimination of heat and smoke, and supply mode of fan operation in under side shows better distribution of heat and smoke. The ventilation system which is changed from ventilation mode to exhaust mode can be applied to control heat and smoke under fire.

• 대한기계학회논문집B
• /
• 제26권11호
• /
• pp.1622-1629
• /
• 2002

To enhance isothermal characteristics of glass-farming surface, a rectangular parallelepiped heat pipes was fabricated, tested, and analyzed. The working fluid was sodium and the wall material was stainless steel 304. The dimension of the heat pipe was 210 (L) $\times$ 140(W) $\times$ 92(H)mm. A lattice structure covered with screen mesh was inserted to promote return of working fluid. The bottom side of heat pipe was heated electrically and the top side was cooled by liquid circulation. The temperature distribution at the bottom surface was of major concern and was monitored to determine isothermal characteristics. A frozen start-up of rectangular parallelepiped liquid metal heat pipe was tested. The operating mode of the sodium heat pipe was affected by the temperature of cooling zone, input heat flux, and the operating temperature of heat pipe. The heat pipe operated in a normal fashion as long as the heat flux was over 5.78W/cm$^2$, and the inside wall temperature of condenser part was above 95$^{\circ}C$ The maximum temperature difference at the bottom surface was observed to be 32$^{\circ}C$ when the operating temperature of the heat pipe was operating normally around 50$0^{\circ}C$. The result showed that a sodium heat pipe was very effective in reducing significantly the temperature difference in the glass-forming surface.

• Structural Engineering and Mechanics
• /
• 제65권3호
• /
• pp.291-302
• /
• 2018

Rigid body spring method (RBSM) is an effective tool to simulate the cracking process of structures, and has been successfully applied to investigate the behavior of reinforced concrete (RC) members. However, the theoretical researches and engineering applications of this method mainly focus on two-dimensional problems as yet, which greatly limits its applications in actual engineering projects. In this study, a three-dimensional (3-D) RBSM for RC structures is proposed. In the proposed model, concrete, reinforcing steels, and their interfaces are represented as discrete entities. Concrete is partitioned into a collection of rigid blocks and a uniform distribution of normal and tangential springs is defined along their boundaries to reflect its material properties. Reinforcement is modeled as a series of bar elements which can be freely positioned in the structural domain and irrespective of the mesh geometry of concrete. The bond-slip characteristics between reinforcing steel and concrete are also considered by introducing special linkage elements. The applicability and effectiveness of the proposed method is firstly confirmed by an elastic T-shape beam, and then it is applied to analyze the failure processes of a Z-type component under direct shear loading and a RC beam under two-point loading.

• 대한전자공학회논문지TC
• /
• 제45권12호
• /
• pp.58-65
• /
• 2008

본 논문에서는 MANET(Mobile Ad hoc Network)에서 가상 위치 기반 라우팅을 위한 GDHT(Geographic Distributed Hash Table)를 적용하는 방법을 제안한다. 기존의 GDHT는 저장하고자할 데이터를 가상 2차원 직교좌표계에 균일하게 매핑 하였다. 그러나, 위치 기반 라우팅을 사용하는 네트워크에서 노드의 분포는 기존 GDHT의 가상 공간과 다르게 분포한다. 따라서, 기존의 GDHT를 바로 적용할 경우, 많은 데이터들이 네트워크의 외곽 또는 특정 노드에 위치하게 된다. 이는 데이터 또는 서비스 검색 거리 및 시간을 늘리는 문제를 발생시킨다. 또한, BVR(Beacon Vector Routing)이나 LCR(Logical Coordinate Routing) 좌표 요소 사이에는 서로 연관관계가 있기 때문에 일반적인 해쉬 함수를 적용할 경우, 존재할 수 없는 좌표에 매핑 될 가능성이 높아진다. 이러한 문제를 해결하기 위하여, 데이터들의 분포를 제어할 수 있도록 하고 좌표 요소 사이의 연관관계가 반영될 수 있는 "Geographic 해쉬 함수"를 제안한다. 분석과 시뮬레이션을 통하여 제안하는 방법이 데이터 분포를 제어할 수 있고, 데이터 검색 성능을 향상시킴을 보인다.

• Restorative Dentistry and Endodontics
• /
• 제20권2호
• /
• pp.655-669
• /
• 1995

Restorative procedures can lead to weakening tooth due to reduction and alteration of tooth structure. It is essential to prevent fractures to conserve tooth. Among the several parameters in cavity designs, cavity isthmus is very important. In this study, amalgam 0 cavity was prepared on maxillary first premolar. Two dimensional finite element models were made by serial photographic method and isthmus(1/4, 1/3, 1/2, 2/3 of intercuspal distance) were varied. Three or four-nodal mesh were used for the two dimensional finite element models. The periodontal ligament and alveolar bone surrounding the tooth were excluded in these models. 1S model was sound tooth with no amalgam cavity. B model was assumed perfect bonding between the restoration and cavity wall. Both compressive and tensile forces were distributed directly to the adjacent regions. A load of 500N was applied vertically at the first node from the lingual slope of the buccal cusp tip. This study analysed von Mises stress, 1 and 2 directional normal stress and Y and Z axis translation with FEM software Super SAPII Version 5.2 (Algor Interactive System Co.) and hardware 486 DX2 PC. The results were as :follows : 1. 1S model was slightly different with 1B model in stress distibution. 1S, 2B, 3B, 4B models showed similiar stress distribution. 2. 1S model and four B models showed similiar pattern in Y axis and Z axis translation. 3. 1S model and four B models showed the bending phenomenon in the translation. 4. As increasing of the width of the cavity, experimental group was similiar with the control group in stress distribution. 5. As increasing of the width of the cavity, experimental group was similiar with the control group in Y and Z axis tranlation.

• Nuclear Engineering and Technology
• /
• 제54권5호
• /
• pp.1674-1685
• /
• 2022

The ball valve is an important device in the pipeline transportation system of nuclear power plants. Its operational stability and safety directly affect the normal working of nuclear power plants. In this study, the transient numerical simulation of the opening and closing process of a ball valve was conducted on the basis of the flow interruption capability experiment of the ball valve by using the moving mesh method and inlet and outlet variable boundary conditions. The flow rate and pressure difference with time of the opening and closing process of the ball valve were studied. The internal flow characteristics of the ball valve under different relative openings were analyzed in conjunction with the typical back-step flow structure. Results show that the transient numerical results agree well with the experimental results. The internal flow characteristics of the ball valve are similar at the same opening during opening and closing process. At small opening, the spool and outlet channels easily form a back-step flow structure. The disappearance and generation of backflow vortices during opening and closing occur at 85% opening and 75% opening, respectively. With the decrease in opening degree, the difference in vortex core area in the flow channel of the ball valve spool in the opening and closing process gradually appears. The research results provide some reference value for the design and optimization of ball valves.

• 한국항공우주학회지
• /
• 제50권10호
• /
• pp.677-690
• /
• 2022

Actuator disk method 기반의 유동 해석자를 이용하여 수직 이착륙 복합형 비행체 중 하나인 이중 덕트 팬 항공기에 대한 공력해석을 수행하고 관련 지면 효과를 분석하였다. 회전 격자 기법을 이용한 해석결과와의 비교를 통해, 지면 효과 분석을 위한 해석자의 특성과 정확도를 함께 평가하였다. 지면과의 거리에 따른 공력 성능과 유동장 특성을 분석하였다. 지면과의 거리가 가까울수록 팬 추력은 증가하지만, 덕트, 동체, 날개의 수직력 감소로 인한 총 수직력 및 제자리 비행 효율의 저하를 확인하였다. 동체 하부의 유동장 분석으로부터 팬 후류와 지면 간의 상호작용에 의해 발생하는 지면 와류와 분수 유동을 확인하고, 이들이 비행체 공력 성능에 미치는 영향을 분석하였다. 속도 프로파일 비교/검토를 통해 비행체로부터의 거리와 방향에 따른 기체 주변 아웃워시의 강도와 특성을 분석하였다. 또한 콜렉티브 피치각에 따른 지면 효과의 영향을 확인하였다.

• Applied Microscopy
• /
• 제24권2호
• /
• pp.78-92
• /
• 1994

Lysozyme has been reported to be present in the secretory granules of the Paneth cell, and lysozyme immunoreactivity has been detected by immunogold method in Paneth cells of the intestine of human, mouse and rat. The present study was aimed at clarifying the intracellular distribution and changes of the lysozyme immunoreactivity in rabbit Paneth cell after common bile duct ligation of rabbit, using the electron microscope immunogold technique. Healthy adult rabbits weighing about 2kg body weight were divided into normal and bile duct ligated groups. Common bile duct ligation was performed aseptically under ether anesthesia. Experimental animals were sacrificed on the 1st, the 3rd, the 5th, the 7th and the 14th day after the operation. Mucosal specimens from the intestinal gland of ileum were fixed in 2.5% glutaraldehyde-1.5% paraformaldehyde, followed by 1% osmium tetroxide, embedded in araldite mixture, cut with LKB-V ultratome. Ultrathin sections were placed on parlodion coated nickel grids (200mesh). The section-bearing grids were floated upside down on the added substance in a moist chamber at room temperature except for the primary antibody step, which was at $4^{\circ}C$. Sections were etched with a saturated solution of sodium m-periodate for 60min. After etching, sections were pretreated with 0.02M tris buffered saline (TBS), pH 8.4, with 1% bovine serum albumin (BSA, Sigma) for 60min, then treated polyclonal rabbit anti-human lysozyme (Dakipatts) diluted 1 : 50 in TBS with 0.1% BSA for 20hr. Subsequently, grids were incubated 60min in biotinylated goat anti rabbit IgG (Amersham) diluted 1 : 100 in TBS with 0.1% BSA. After this, sections were incubated 60min on streptavidin gold G10 (Amersham) diluted 1 : 50 in TBS with 0.1% BSA. After each step, the grids were briefly rinsed with TBS with 0.1% BSA. After the strepavidin gold step, the sections were jet washed with distilled water. Counterstain of the sections performed by uranyl acetate and lead citrate, and observed with JEM 100 CX II electron microscope. Observed results were as follow; 1. Secretory granules of mouse Paneth cells have a lysozyme immunoreactivity and also eosinophil leucocyte of rabbit applied for the positive-control stain, are well labeld with gold particles. 2. Normal rabbit Paneth cells have a lysozyme immunoreactivity restricted on the secretory granules. 3. Amount lysosomes containing myelin figures in the Paneth cells were significantly increased from 5th day after the common bile duct ligation. 4. Immunoreactivity of Paneth cell secretory granules were more activated on the 3rd day after the common bile duct ligation as compared with those of the normal animal. But the lysozyme immunoreactivity were decreased from the 5th day after the common bile duct ligation. 5. Considering the above finding, lysozyme contained Paneth cell are affected following of common bile duct ligation, whereas lysosomes containing myelin-figure do not exhibit any immunoreactive relationship with those of secretory granules.

• Restorative Dentistry and Endodontics
• /
• 제32권2호
• /
• pp.151-161
• /
• 2007

치아 우식증은 구강 영역에서 가장 흔한 질환이나 여러 가지 복잡한 요소가 작용하기 때문에 이에 대한 발생기전과 치료법에 대해서는 완전히 이해되지 않은 상태이다. 특히 초기우식의 재광화에 있어서 pH의 영향에 대하여 논란의 여지가 있다. 본 연구에서는 유산 완충용액을 이용하여 상아질에 인공 우식을 형성하고 이때의 무기질 소실을 측정하고, 탈회된 시편을 pH가 다른 세 가지 재광화 용액 (pH 4.3, 5.0, 5.5 군)으로 재광화시켰을 때 나타나는 무기질의 침착되는 양과 침착이 일어나는 부위를 Microradiograph를 이용하여 정량적으로 비교 분석하였다. 또한 주사전자현미경을 이용하여 수산화인회석 결정의 정상 상태 탈회된 상태, 그리고 재광화가 일어났을 때의 상태를 정성적으로 비교하여 다음과 같은 결과를 얻었다. 1. Microradiograph분석시 pH가 증가할수록 탈회된 상아질에서 재광화양이 유의차 있게 증가되는 경향을 보였고, pH가 낮아질수록 재광화가 일어나면서 더 깊게 탈회되는 양상을 보였으나, pH 5.5 군은 전반적으로 재광화가 일어나는 경 향을 보였다 (p<0.05). 2. 주사전자현미경 소견에서 상아질 우식의 재광화는, 유기기질 망을 둘러싸고 있는 수산화인회석 결정의 표면으로부터 진행되며 결국에는 탈회 시 파괴된 공간을 채워가는 양상으로 관찰되었다. 3. 재광화 5일 후 pH 4.3. 5.0군에서 무기질이 침착되어 수산화인회석결정이 정상보다 커졌으며, pH 5.5군에서 재광화된 부위의 결정은 정상으로 회복되는 양상을 보였다. 재광화 10일 후 pH 4.3, 5.0 군에서 재광화 5일 후에 정상보다 커졌던 결정들이 정상상아질의 결정 크기로 줄어들었으며 pH 5.5군에서는 결정의 크기가 2배정도 커진 경우도 관찰되었다. 본 실험의 결과에 의하면 상아질의 우식과 재광화 과정은 단순한 탈회와 재광화의 독립적인 과정이 아니고 동력학적으로 탈회와 재광화가 동시에 일어나는 과정이며, 이때 재광화는 기존의 수산화인회석 결정의 표면으로부터 진행되었다.

• 대한치과보철학회지
• /
• 제49권4호
• /
• pp.324-332
• /
• 2011

연구 목적: 다양한 물성의 층으로 제작된 마우스가드를 장착하였을 때 치아와 악골에 가해지는 힘의 유한요소 분석을 시행하기 위함이다. 연구 재료 및 방법: 연구대상의 모형을 교합기에 장착한 뒤 Signature Mouthguard System (Dreve dentamid GmbH., Unna, Germany)을 이용하여 맞춤형 구강보호장치를 제작하여 장착한 후 두정부에서 경추까지 1.0 mm로 컴퓨터 단층촬영을 시행하였다. 영상을 Cantibio BIONIX 프로그램을 이용하여 3차원 유한요소 모델을 생성한 뒤 HyperMesh 소프트웨어를 이용하여 데이터 분석을 시행하였다. 마우스가드는 층에 따라 다음과 같이 분류하였다. 1. 연질(Bioplast)(SG) 2. 경질(Duran)(HG) 3. 중질(Drufomat)(MG) 4. 연질+중질(SG + HG) 5. 경질 + 연질(HG + SG) 6. 연질 + 경질 + 연질(SG + HG + SG) 7. 경질 + 연질 + 경질(HG + SG + HG) 하중위치는 하악골의 전방 이부(F1), 하악 좌측 제1대구치 하방의 하악체 중앙(F2), 하악각의 전연(F3) 세점으로 하였고 FH Plane에 45도 방향으로 800N, 0.1초의 힘을 가하였다. 통계방법으로는 반복분산분석과 사후분석(다중비교분석(Multiple comparison test) DUNCAN test)을 이용하였다. SPSS 소프트웨어 (Ver.13, SPSS Inc., Chicago, IL, USA)를 사용하여 분석하였다. 결과: 치아와 상악골에서의 응력분포는 모든 하중위치에 대하여 연질층이 하악 치아에 접촉하는 구강보호장치가 적은 응력값을 나타냈으며, 과두에서의 응력분포는 모든 하중위치에 대하여 경질층이 하악 치아에 접촉하는 구강보호장치가 적은 응력값을 나타내었다. 두 연질층 사이에 경질층이 개재된 세층의 구강보호장치가 하중 시 상대적으로 고르게 응력이 분산되는 것으로 나타났다. 결론: 상하악 치아에는 연질층이 접촉하고 두 연질층 사이에 경질층을 삽입하는 형태의 구강보호장치가 악안면 외상 시 상대적으로 하중을 분산시키는데 가장 우수하다고 생각된다.