• 한국해양학회지:바다
• /
• 제12권3호
• /
• pp.159-169
• /
• 2007

가두리 양식으로 인해 과잉 공급된 유기물은 연안의 저서생태계를 교란시키는 주요인의 하나로 알려져 왔다. 이 연구는 2003년 6월과 8월 가두리 밀집해역인 통영연안의 두 양식장(A, B)에서 가두리 양식으로 인한 유기물 오염이 저서동물군집, 특히 저서다모류군집에 미치는 영향 정도와 범위를 알아보기 위해 수행되었다. 다모류가 저서동물 군집의 개체수 조성에서 차지하는 비율은 각 조사선에서 $81%{\sim}87%$로 매우 높았다. 가두리로부터 거리가 증가함에 따라 다모류군집의 종 수, 밀도, 다양도 그리고 우점종의 분포 양상은 현격히 변하였다. 가두리로부터 10 m 이내에서는 유기물 오염지표종인 Capitella capitata가 우점하였으며, 종 수도 가장 낮아 군집이 유기물에 의해 심하게 교란 받고 있는 것으로 나타났다. 특히, C. capitata는 가두리 양식장의 밀집도가 상대적으로 높고 지형학적으로 보다 은폐된 양식장 A에서 최대 $18,410\;ind.m^{-2}$의 고밀도 출현 양상을 보였으며, 두 양식장의 거리에 따른 개체밀도와 다양도 패턴의 전체적인 차이를 좌우하였다. C. capitata의 개체수가 급감한 10 m 지점 이후 15 m까지 구간에서는 종 수가 급격히 증가하였다. 이런 종 수 및 밀도의 급격한 변화는 이 구간이 심한 유기물 오염 상태(highly polluted)에서 약한 유기물 오염 상태(slightly polluted)로 전환되는 추이점(ecotone point)임을 말해준다. $15{\sim}60m$ 구간에서는 종 수와 밀도의 추가적인 증가와 유지가 관찰되는 약한 유기물 오염 상태의 점이역(transitional zone)이 형성되었으며 군집의 주 구성원은 Lumbrineris longifolia, Aphelochaeta monilaris 등과 같은 잠재적 유기물 오염지시종들 이었다. K-우점도 곡선과 다차원 척도법의 결과도 앞의 군집변화와 일치하였다. 이 연구에서 저서다모류군집에 대한 유기물 오염의 영향은 가두리로부터 떨어진 거리, 가두리가 위치한 해역의 지형학적 특성 및 가두리 양식장의 밀집도에 의해 좌우되었다.

• 한국양식학회지
• /
• 제2권2호
• /
• pp.53-90
• /
• 1989

식욕에 부합되는 적정양의 먹이 섭취는 잉어의 성장을 증가시키고, 동시에 먹이의 허비를 막으며, 그로 인해서 사육수질의 오염을 막는 부수적인 효과도 가지게 된다. 이 목적을 달성하기 위하여 식욕 유발과 그에 따른 빠른 성장의 중요한 요인으로서 용존산소에 관한 정밀한 연구가 필요하다. 수온 $25^{\circ}C$ 하에서 잉어(이스라엘계)의 미성어, 67g, 200g, 400g, 600g 및 800g 되는 실험군으로서, 용존산소를 2.0-6mg/$\iota$ 사이에서 사료를 체중의 $1\%$부터 먹을 수 있는 양까지에 걸쳐서 사육실험연구를 하였다. 어체가 작을수록 동일한 용존산소 조건에서는 보다 높은 식욕과 보다 많은 먹이 섭취량을 나타내었다. 어체가 클수록 낮은 용존산소양에서는 생활 능력이 약해지고, 먹이 섭취량이 증가하면 내성은 더욱 줄어졌다. 성장률(일간 성장률)은 낮은 용존산소에 의해서 영향을 받지 않는 한, 먹이의 섭취량이 많을수록 증가하였다. 최고성장률은 67 g 어에서는 D.O. 5.0 mg/$\iota$에서 1일 먹이 량이 체중의 $7\%$ 일때 일간성장률 $\5.05%$였고, 200g 어에서는 D.O. 5.5/$\iota$ 에서 먹이량 $6\%$일때 1일 성장률이 $3.75\%$였다. 400g 어에서는 D.O. 6.0 mg/$\iota$에서 먹이량이 $5\%$ 일때 1일 성장률 $3.37\%$ 였으며, 600g 어에서는 D.O. 5.5 mg/$\iota$에서 먹이량이 1일 $4\%$였을 때 1일 성장률 $2.82\%$였다. 800g 어에서는 D.O. 5.0mg/$\iota$에서 먹이량이 1일 $3\%$었을 때 1일 성장율이 $1.95\%$였다. 정상적인 생활 및 성장 기능발휘 가능 D.O. 농도로부터 최고 먹이 섭취가능양에 부합되는 D.O. 농도까지 사이에서 먹이 전환효율(사료가 어체로 바뀌는 효율)은 처음 D.O.가 증가함에 따라 높아지고, 최고치에 이른 뒤, D.O.가 더욱 더 높아짐 에 따라 먹이 전환효율은 다시 감소하기 시작한다. 이 최고 사료효율은 작은 어체에서는 큰 어체 보다 높은 먹이 섭취량에서 나타난다 (물론 먹이 섭취량에 부응하는 D.O.량이 갖춰졌을때). 즉 최고 먹이 전환효율은 67g 어에서 D.O. 3.0-4.0 mg/$\iota$에서 먹이 섭취량 $4\%$때 였으며, 200g 어에서는 D.O. 3.0-4.5mg/$\iota$에서 먹이 섭취량 $3\%$때였고, 400 g 어에서는 D.O. 4.0-4.5mg/$\iota$에서 먹이 섭취량 $2\%$때였다. 600g 및 800 g 어에서는 가장 낮은 D.O.에서 먹이 섭취량 $1\%$ 때였다. 적절하지 못한 낮은 D.O. 함량에서는 정상적인 조건하의 개체보다 먹이 섭취량이 감소하며, 또 먹이가 소화관을 빨리 통과하고, 똥의 양이 증가하는 것을 관찰할 수 있었다. 그리고, 견디지 못할 만큼 낮은 D.O.하에서는 먹이를 토하고, 체색이 옅은 황색으로 변하거나, 또는 회색의 얼국진 반점으로 변하기도 했다. 이 모든 현상들이 먹이 전환효율의 감소로 이어졌다. 반면에 아주 높은 D.O.하에서는 강한 활동을 하였으며, 어체 크기가 같고 먹이의 양도 같았지만 D.O.가 약간 낮은 상에 비교하여 먹이 전환효율이 떨어지는 경향이 나타났다. 모든 크기에서 먹이량을 체중의 $1\%$만 주었을 때는 D.O. 량이 2.0-2.5mg/$\iota$ 이면 적절하였다. 먹이량을 증가시키면 어체의 정상활동을 유지시키기 위하여 보다 높은 D.O.가 필요하였다. 67g 어에서는 D.O. 2.0-2.5mg/$\iota$이면 체중의 $2\%$이상 먹이량을 충분히 지탱할 수 있었으나, 먹이를 $5\%$로 증가시키면 D.O. 3.0-4.0 mg/$\iota$일 때 식욕이 보다 왕성하고 높은 성장을 가져 왔다. 먹이량이 $5-7\%$에서는 4.0 mg/$\iota$ 이상의 D.O.라야 식욕을 유지시킬수 있다. 200g 어에서는 먹이량이 체중의 $2-3\%$ 일때는 D.O. 3.5-4.5mg/$\iota$에서 가장 높은 성장률을 보였으나 먹이량이 체중의 $3-6\%$로 올라가면 D.O. 함량이 4.5mg/$\iota$을 넘어서야만 어류의 생활기능 발휘에 부응될 수 있었다. 400 g, 600 g 및 800 g 어에서는 먹이량이 체중의 $2\%$를 넘을 때는 ($4\%$ 및 $5\%$까지 실험) 모두 D.O. 함량이 4.5 mg/$\iota$를 넘어야 했다.

• 대한간호학회지
• /
• 제22권1호
• /
• pp.81-115
• /
• 1992

The problem addressed by this study was to determine the effect of nurse - patient agreement on the means to achieve nursing goals in the early postpartum period of primiparous mothers. It was hypothesized that the experimental treatment would result in hegher self-confidence and satisfaction in maternal role performance. This purpose was to contribute to the planning of nursing care to enhance self- confidence and satisfaction in maternal role performance and to the development of relevant nursing theory. Especially, the early postpartum period is crucial toward in recovery from childbirth and attainment of the maternal role. Maternal role attaintment is a complex social and cognitive process of stimulus -response accomplished by learning. Most women attain the maternal role sucessfully. But, some primiparous mothers experience difficultites in attainment of the maternal role due to lack of experience and knowledge. Self-confidence and satisfaction in maternal role performance are important factors in attainment and adjustment to the maternal role (Mercer, 1981a, 1981b ; Lederman, Weigarten, and Lederman, 1981 :Bobak and Jensen, 1985). Nursing is defined as behaviors of nurses add patients that attain nursing goals through action, reaction, interaction, and transaction. For attainment of nursing goals, active participating transactions must occur by agreement on the means to achieve those goals through nurse -patient mutual goal setting and establishment of their active relationships(King, 1981, Ha, 1977). Based on King's theory of goal attainment (1981), this stuy was planned as a non-equivalent control group, non -synchronized quasi -experimental design using agreement on the means to achieve nursing goals in early postpartum as the experimental treatment. The data were collected from July 20 to Sep. 1, 1991 by questionnaires with 60 primiparous mothers planing to breast feed after normal deliveries at W hospital in Pusan, Korea. The subjects were divided into a control group(conventional group) -those admitted from July 20 to Aug. 12, and an experimental group(agreement group) - those admitted from Aug. 13 to Sep. 1. The instument for agreement on the means to nursing goals in the early postpartum period included five steps - identification of disturbances of problems through action, reaction, and interaction with primiparous mothers : mutual early postpartal nursing goal setting : exploration of the means to achieve goals ; agreement on the means (self- care, ealry maternal -infant contact, performance of mothering behavior, and communicating about the infant's behavior and health condition) : implementation of the means. This instrument was developed on the basis of King's elements that lead to transactions in nurse-patient interactions. Lederman et al's (1981) scale for Confidence in ability to cope with tasks of motherhood and Lederman et al's(1981) scale for Mother's satisfaction with motherhood and infant care were used to measure self-confidence and satisfaction in maternal role performance ·with the subjects immediately after admission and on the day of discharge. Self-care performance in the experimental group was measured by self -evaluation tool developed by the investigator from the literature concerned. The tools to measure Pelf-confidence and satisfaction in maternal role performance, and the tool to measure self-evaluation of self-care performance were tested for internal reliability. Cronbach's Alphas were 0.94, 0.94, and 0.63. The data were analysed by using in S.P.S.S. computerized program and included percentage, x²-test, t-test, ANOVA, and Pearson Correlation Coefficient. The conclusions obtained from this study are summerized as follows : 1. The degree of self-confidence in maternal role performance of the total subjects group measured before the experimental treatment was above average with a mean score of 2.77(range 2.14-3.64). Out of 14 items, those with relatively high mean scores were ‘I would like to be a better mother than I am’(3.95), and ‘I have my doubts about whether I am a good mother’(2.87). Those with low mean scores were ‘I know that my baby wants most of the times’(2.28), ‘When the baby cries, I can tell what she /he wants’(2.37), and ‘I have confidence in my ability to care for the baby’(2;50). That is, the self - confidence of Primiparous mothers was considerably high in mothering, but rather low in activities concerning the infant care and understanding of the infant behavior. The degree of satisfaction in maternal role performance of the total subjects group measured before the experimental treatment was high with a mean score of 3.18(range 1.92-3.92). Out of 13 items, those with relatively high mean scores were ‘I am glad 1 had this baby now’(3.75), ‘I play with the baby between feedings when s/he is awake and quiet’(3.67), and ‘I enjoy being a mother’(3.27). Those with low mean scores were ‘I am upset about having too many responsibilities as a mother’(2.78), ‘It bothers me to get up for the baby at night’(2.82), and ‘I get annoyed if the baby frequently interrupts my activities’.(2.82), That is, the satisfaction of primiparous mothers was considerably high in mothering and infant care, but rather low in restraints in time or on the mother's self accomplishment and development. 2. Agreement on the means to achieve nursing goals in the early postpartum period included process of mutual goal setting, exploration of the means to achieve goals, and ahreement in concert means to achieve goals based on the mothers' condition, concerns, self-perception of the nurse - patient interactions. In the process of agreement, there was agreement that the means to achieve goals should be through trust and establishment of active relationships with the nurse through identification of problems according to planned nursing goals and active interaction, such as explanations, teaching, changing of opinions, acceptance or rejection of explanations, and proposing of questions. Therefore agreement on the means to achieve nursing goals in the early postpartum period appears to be an effective nursing intervention for primiparous mothers. 3. The degree of self- confidence in maternal role performance of the exprimental group was higher than that of the control group(t＝3.95, p＜0.01). Out of 14 items, those with higher score in the experimental group were ‘I would like to be a better mother than I am’(t＝1.93, p＜0.05), ‘I know that my baby wants most of the times’(t＝2.75, p＜0.01), ‘When the baby cries, 1 can tell what she/he wants’(t＝2.10, p＜0.05), ‘I have confidence in my ability to care for the baby’(t＝3.72, p＜0.01), ‘I trust my own judement in deciding how to care for the baby’(t＝1.96, p＜0.05), ‘I feel that I know my baby and what to do for him /her’(t＝2.44, p＜0.01), ‘I am concerned about being able to meet the baby's needs’(t＝2.87, p＜0.01), ‘I know what my baby likes and dislikes’(t＝3.26, p＜0.01), ‘I don't know to care for the baby as well as I should’(t＝2.07, p＜0.05), and ‘I am unsure about whether I give enough attention to the baby’(t＝3.04, p＜0.01), That is, the degree of self-confidence in mothering, activities concerning infant care, and understanding of infant behavior of the experimental group was higher than that of the control group. Therefore, the first hypothesis, that the degree of self-confidence in maternal role performance of the experimental group would be higher than that of the control group, was supported(t＝3.95, p＜0.01). 4. The degree of satisfaction in the maternal role performance of the exprimental group was higer than that or the control group(t＝2.31, p＜0.05). Out of 13 items, those with higher score in the experimental group were ‘I am glad I had this baby now’(t＝2.29, p＜0.05), ‘I enjoy taking care of the baby’(t＝2.4g, p＜0.01), ‘It is boring for me to care for the baby and do the same thing over and over’(t＝2.87, P＜0.01), ‘I am unhappy with the amount of time I have for activities other than childcare’(t＝2.51, p＜0.01), and ‘When bathing and diapering the baby, I would like to be doing something else’(t＝2.43, p＜0.01). That is, the degree of satisfaction in mothering, infant care, and restraints in time of on the mother's self accomplishment and development in the experimental group was higher than that of the control group. Therefore, the second hypothesis, that the degree of satisfaction in maternal role performance of the experimental group would be higher than that of the control group, was supported(t＝2.31, p＜0.05). 5. The third hypothesis, that the higher the degree of satisfaction in materenal role performance, the higher the degree of self-confidence in materenal role performance in the experimental group, was supported (r＝0.57, p＜0.01)

• 자원환경지질
• /
• 제45권3호
• /
• pp.317-333
• /
• 2012

전기 고생대 태백산분지 영월층군은 탄산염-규산쇄설성 퇴적암 복합체로서 하부로부터 삼방산층, 마차리층, 와곡층, 문곡층, 영흥층으로 이루어져있다. 영월층군에 대한 순차층서학적 분석에 따르면 중기 캠브리아기에 일어난 범람에 의해 최하부의 규산쇄설성 사질 퇴적암이 우세한 삼방산층이 퇴적되었다. 이어지는 후중기 캠브리아기 ~ 전후기 캠브리아기에 지속적으로 발생한 빠른 해수면 상승으로 마차리층 하부에는 셰일, 입자암, 각력암층을 협재한 사면 혹은 심부 램프 시퀀스가 형성되었다. 후기 캠브리아기 동안 지속된 해수면 상승은 실질적인 퇴적가능공간을 창출하였고, 조하대 환경에 탄산염 퇴적물 공장이 만들어졌으며, 탄산염 대지에는 마차리층을 구성하는 탄산염암이 우세한 조하대 시퀀스가 형성되었다. 마차리층 상부의 와곡층은 후후기 캠브리아기의 완만한 해수면 상승국면에서 만들어진 탄산염 램프 시퀀스로 해석되며, 퇴적 당시에는 리본 탄산염암과 탄산염 역암을 포함하는 이회암으로 구성되었던 것으로 보인다. 와곡층은 퇴적직후에 일차적으로 캠브리아기와 오르도비스기 사이의 해수면 하강국면에서 불안전 백운암화 과정을 거치고, 후에 심부 매몰 속성환경에서 광범위한 백운암화 작용을 받은 것으로 해석된다. 전기 오르도비스기에도 세계적인 해수면 상승과 해침은 지속되었으며, 영월층군의 조하대 램프 퇴적환경은 그대로 유지되어 탄산염 역암층을 협재하는 석회이암과 이회암이 교호하는 전형적인 램프 시퀀스인 문곡층이 형성되었다. 문곡층은 중기 오르도비스기에 퇴적된 것으로 알려진 영흥층에 덮여 있다. 영흥층은 주로 윤회층리를 보이는 조석대지 탄산염암으로 이루어져 있으며, 문곡층의 최상부에서 조하대 퇴적환경이 영흥층의 조석대지 퇴적환경으로 변화한다. 세계적 1차 규모 순차 경계면인 소크(Sauk)와 티피카누(Tippecanoe) 시퀀스의 경계는 영흥층 중부에서 관찰되는 최소퇴적가능공간 부근에서 인지된다. 중기 오르도비스기 초기의 세계적 해수면 하강과 이어지는 해수면의 급격한 상승은 영흥층의 전반적인 상향 천해화 윤회층의 전진퇴적체를 형성하였다. 영월층군이 퇴적된 영월 탄산염 대지의 상대적 해수면 변동곡선을 복원해 보면 같은 태백산 분지의 태백층군이 퇴적된 태백 탄산염 대지의 해수면 변동 곡선과 유사함을 확인할 수 있다. 이것은 두 개의 탄산염 대지가 유사한 조 구조적 운동 역사를 갖는다는 것을 의미하며, 이러한 유사성은 영월층군이 형성된 영월 탄산염 대지가 비록 태백층군이 퇴적된 태백 탄산염 대지와 상이한 퇴적시스템을 갖기는 하지만 상대적으로 가까운 지역에 속해 있었음을 암시한다. 퇴적층서 분석결과에 따르면 영월 탄산염 대지는 태백 탄산염 대지에 비해 상대적으로 열린 천해 환경이었을 것으로 추측된다. 고생대 후기와 중생대 전기에 걸쳐 발생한 북중국지괴와 남중국지괴의 충돌 시기에 영월 탄산염 대지와 태백 탄산염 대지가 복잡한 이동과정을 거쳐 현재의 태백산 분지에 모이게 된 것으로 해석된다.

• 대한방사선치료학회지
• /
• 제28권1호
• /
• pp.7-16
• /
• 2016

목 적 : 변형 근치적 유방절제술(modified radical mastectomy, MRM)후 흉벽에 전자선 치료를 받는 환자에게 3D-bolus와 step-bolus를 각각 적용하여 유용성을 비교 평가하였다. 대상 및 방법 : 본 연구는 광자선과 전자선을 이용한 역하키스틱법 방식으로 치료계획이 수립된 총 6명의 유방암 환자를 대상으로 하였다. 전방흉벽에 대한 전자선 처방선량은 회당 180 cGy로 3D 프린터(CubeX, 3D systems, USA)로 제작된 3D-bolus와 본원에서 자체 제작한 기존의 stepbolus를 적용하였다. 3D-bolus와 step-bolus에 대한 표면선량은 GAFCHROMIC EBT3 film (International specialty products, USA)을 이용하여, bolus의 다섯 측정지점(iso-center, lateral, medial, superior, and inferior)에 대한 선량 값을 통해 비교 분석하였다. 또한 3D-bolus와 step-bolus 적용에 따른 치료계획을 각각 수립하여 그 결과를 비교하였다. 결 과 : 표면선량은 3D-bolus 적용 시 평균 179.17 cGy이고 step-bolus는 172.02 cGy였다. 처방선량 180 cGy에 대한 평균 값의 오차율은 3D-bolus 적용 시 -0.47%이고 step-bolus는 -4.43%였다. 측정지점 iso-center에서의 오차율은 3D-bolus 적용 시 최대 2.69%의 차이를 보였고, step-bolus는 5.54%였다. 치료의 오차범위는 step-bolus에서 약 6%이고, 3D-bolus는 약 3%였다. 치료계획을 통해 비교한 흉벽의 평균 표적선량은 0.3%로 큰 차이를 나타내지 않았다. 그러나 폐와 심장의 평균 표적선량은 step-bolus에 비해 3D-bolus에서 -11%와 -8%로 감소하였다. 결 론 : 본 연구 결과로 볼 때 흉벽에 대한 피부표면의 접촉면이 고려된 3D-bolus는 step-bolus에 비하여 환자 피부에 잘 밀착되고, 정밀한 흉벽두께 보상이 가능하기 때문에 선량 균일성이 향상됨을 확인하였다. 또한 흉벽에 대한 선량은 동일하지만 인접장기의 선량을 감소시켜 정상조직을 더 많이 보호함으로써 3D-bolus가 임상적으로 유용한 보상체로 사용될 것으로 사료된다.

• 대한소아치과학회지
• /
• 제26권2호
• /
• pp.339-349
• /
• 1999

본 연구에서는 수복에 따른 치질 내부 구조물의 열적변화를 평가하기 위하여 와동이 형성된 인공 치아모형에 아말감충전, 아말감과 스테인레스 스틸관 수복, 금인레이와 금관수복, ZOE 이장 및 아말감충전 등으로 수복한 후 온도변화를 관찰하였다. 각 실험군에 $4^{\circ}C$와 $60^{\circ}C$로 2초와 4초 동안 자극을 가한 후 치아내부의 온도분포를 2차원적으로 분석하였고, 치수 중앙부에서 외측으로 층을 형성하여 3차원적인 해석을 시행한 결과, 다음과 같은 결론을 얻었다. 1. $4^{\circ}C$의 자극이 2초간 가해진 아말감 충전 경우, 아말감 충전과 스테인레스 스틸관을 장착한 경우에서는 $1^{\circ}C$ 내외의 차이를 보였으며, 치수와 상아질 경계면에서 3초 경과시에 $29^{\circ}C$까지 급격한 온도 하강을 보였으며 9초 후에 $25^{\circ}C$에 도달하였다. 또한 금으로 수복한 경우에서는 3초 후 $25^{\circ}C$까지 하강하여 그 온도를 유지하였으며, ZOE 이장 경우에서는 최저온도가 $4^{\circ}C$ 이상 높게 나타났다. 2. $4^{\circ}C$ 자극을 4초간 가한 경우에서는 9초 후에서 2초 자극시보다 $2-3^{\circ}C$ 낮았으며, 금 수복 경우에는 5초 후에 $21^{\circ}C$의 최저온도를 보인 후 점차 회복되었다. 3. 아말감 충전 및 스테인레스 스틸관을 같이 장착한 경우에 $60^{\circ}C$, 2초간 자극에는 3초 후 $40^{\circ}C$의 온도로서 상승하였으나 9초 후에 $30^{\circ}C$로 하강 하였으며, 금 수복에서는 2초 후 $41^{\circ}C$까지 온도가 상승하였고, 9초 후 $28^{\circ}C$를 보여 $13^{\circ}C$의 차이가 있었다. ZOE 이장 경우에는 온도차이가 $5^{\circ}C$로서 안정된 양상을 보였다. 4. $60^{\circ}C$, 4초 자극에 대한 아말감 충전 및 스테인레스 스틸관을 같이 장착한 경우에서 5초 후 $42^{\circ}C$, 9초 후 $35^{\circ}C$를 보였으나 금 수복 경우에서는 3초 후 $49^{\circ}C$, 9초 후 $31^{\circ}C$의 온도변화를 나타내었다. 5. 3차원 분석에서 치수 중앙부에서 멀어질수록 온도변화가 심하였다.

• 대한방사선치료학회지
• /
• 제23권1호
• /
• pp.59-66
• /
• 2011

목 적: 유방 부분 절제술 후 방사선 치료 시 기존의 라이낙을 이용한 치료기법과 비교하여 TOMO Direct를 이용한 접선 치료 기법의 임상적 유용성을 알아보고자 한다. 대상 및 방법: 유방 부분 절제술 후 방사선 치료를 받은 좌측 유방암 환자 3명을 대상으로 라이낙을 이용한 쐐기 접선 조사 기법(Wedged tangential fields technique)과 조사면 내 선량 보강 기법(Field In Field technique, FIF), TOMO Direct, TOMO Direct 세기 변조 방사선 치료(Intensity Modulated Radiation Therapy, IMRT)기법을 이용하여 동일한 처방 조건(CTV 내 $D_{90%}$: 50.4 Gy/28 fx)으로 치료계획을 수립하였다. 선량 분석을 위해 선량 체적 히스토그램(Dose Volume Histogram, DVH)과 등선량 곡선 (Isodose curve)을 이용하여 종양 내 표적체적(Clinical Target Volume, CTV)과 손상위험장기(Organ At Risk, OAR)에 대한 선량을 비교분석 하였다. 표적체적의 선량 인자로는 $D_{99}$, $D_{95}$, 선량 균일 지수(Dose homogeneity index, DHI: $D_{10}/D_{90}$)와 $V_{105}$, $V_{110}$을 손상위험장기의 선량 인자로는 심장의 $V_{10}$, $V_{20}$, $V_{30}$, $V_{40}$과 좌측 폐의 $V_{10}$, $V_{20}$, $V_{30}$을 비교 분석하였다. 결 과: 표적체적의 선량 분석 결과로 $D_{99}$, $D_{95}$의 평균값은 각각 쐐기 접선 조사(W)에서 $47.7{\pm}1.1Gy$, $49.4{\pm}0.1Gy$이었으며, 조사면 내 선량 보강 기법(F)은 각각 $47.1{\pm}0.6Gy$, $49.2{\pm}0.4Gy$, 그리고 TOMO Direct(D)와 TOMO Direct IMRT(I)에서는 각각 $49.2{\pm}0.4$ vs. $48.6{\pm}0.8Gy$, $49.9{\pm}0.4$ vs. $49.5{\pm}0.3Gy$이었다. 선량 균일 지수의 평균값은 W: $1.1{\pm}0.02$, F: $1.07{\pm}0.02$, D: $1.03{\pm}0.001$, I: $1.05{\pm}0.02$이었다. 각각의 치료 기법으로 $V_{105}$, $V_{110}$의 평균값을 비교하였을 때 쐐기 접선 조사 시 각각 $34.6{\pm}9.3%$, $7.5{\pm}7.9%$로 가장 높았고 조사면 내 선량 보강 기법은 $16.5{\pm}14.8%$, $2.1{\pm}3.5%$로, TOMO direct IMRT는 $7.5{\pm}8.3%$, $0.1{\pm}0.1%$로 낮아졌으며 TOMO direct에서는 두 값 모두 0%로 나타났다. 손상 위험 장기에 대한 선량 분석 결과 각각의 치료 기법 사이에 유의한 차이를 보이지 않았다. 결 론: TOMO Direct를 이용한 접선 조사 기법은 기존의 쐐기 접선 치료 기법보다 치료 용적 내에 균일한 선량분포를 얻을 수 있을 뿐만 아니라 IMRT 또는 Tomotherapy와 달리 정상조직의 저 선량 영역의 노출용적을 증가시키지 않았으며 조사면 내선량 보강 기법 보다 용이한 치료계획 절차를 수행하므로 유방 부분 절제술 후 방사선 치료 시 임상적으로 유용하리라 사료된다.

• Applied Biological Chemistry
• /
• 제16권1호
• /
• pp.18-30
• /
• 1973

삼요소(三要素) 단순시험(單純試驗) 포장(圃場)을 대상으로 지엽(止葉) 및 하위엽(下位葉) 분석(分析)에 의(依)한 수도(水稻)의 영양진단(營養診斷) 척도(尺度)를 찾고자 하했던 바 다음과 같은 결과(結果)를 얻었다. 1. 어떤 영양(營養)이 결핍(缺定)한 토양(土壞)의 무비구(無認區) 결핍구(缺乏區) 및 시비구(施肥區)에서 유인결핍(誘引缺乏), 염계결핍(鹽界缺乏), 잠재결핍(潛在缺乏) 치사흡수(侈奢吸收) 과잉장해(過剩障害)의 제단계(諸段階) 척도(尺度)를 추정(推定)할 수 있었다. 2. 수확기(收穫期) 지엽중(止葉中) 질소함량(窒素含量)이 1% 이하(以下)이면 유인결핍(誘引缺乏)이고 $1.0{\sim}1.2%가 염계결핍(鹽界缺乏)$1.2{\sim}1.6%이 잠재결핍(潛在缺乏)$1.6{\sim}1.9%가 만족(滿足)영역으로 치사흡수단계(侈奢吸收段階)이고 1.9 이상(以上)에서 장해(障害)를 받는다. 3. 인산(燐酸)(P_2O_5)$은 각단계(各段階)가 0.3% 이하 $0.3{\sim}0.4 $0.4{\sim}0.550.55 이상으로 나타났으며 과잉장해수준(過剩障害水準)은 알 수 없었다. 4. 규산(硅酸)$(SiO_2)$은 4%이하 $4{\sim}6 $6{\sim}11및 11이상(以上)으로 나타났다. 5. 가리(加里)$(K_2O)$는 0.5% 이하(以下) $0.5{\sim}0.9 $0.9{\sim}1.2 $1.2{\sim}1.4 및 1.4 이상(以上)의 장해(障害)영역을 보였다. 6. 지엽중(止葉中) 가리(加里)는 질소(窒素)를 수생육(穗生育)에 기여케한 결과(結果)로 지엽중(止葉中) 질소함량(窒素含量)을 낮추고 지엽중(止葉中)을 줄인다. 7. 인산(燐酸)은 Mg>Si>Mn>K의 순(順)으로 하엽(下葉)에서 지엽(止葉)으로의 이동(移動)을 촉진(促進)하고 Ca>N의 순으로 저지(沮止)하는 반면 가리(加里)는 Mn>Ca의 순으로 촉진(促進)하고 Ma>Si>N의 순(順) 으로 저지(沮止)하였다. 8. 양분전류촉진지수(養分轉流促進指數)는 $(F_2L_1-F_1L_2){\cdot}100/F_1L_1$으로 계산할 수 있는데 한 양분(養分)의 시비량(施肥量)이 타양분(他養分)의 이동(移動)에 대(對)한 영향의 지표(指標)로 적합(適合)하였다. 여기서 F 와 L 은 지엽(止葉) 및 하엽중(下葉中)의 양분농도(養分濃度)를, 2는 비료(肥料)의 시비수준(施賂水準)을 의미(意味)한다. 9. 적기재배(適期栽培)에 비(比)하여 조기재배(早期栽培)는 엽중(葉中) $SiO_2$의 함량(含量)이 하엽(下葉)보다 지엽(止葉)에서 낮아 규산(珪酸)의 흡수(吸收) 및 이동(移動)이 불량(不良)한 것으로 나타났다. 10. 가리결핍답(加里缺乏畓)에서 나타난 호마엽고병(胡麻葉枯病)은 지엽중(止葉中) 가리함량(加里含量)보다 $SiO_2$ 함량(含量)에 더 깊은 관계를 보였다11. 생육(生育)이 불량(不良)한 저수답(低收沓) 수도(水稻)의 엽위별(葉位別) 분석(分析)은 주인(主脚) 영양(營養)을 밝혀를 뿐만 아니라 $2{\sim}3$개의 기타 영양장해(營養障害)가 수반되고 있음을 나타내었다. 12. 문제지역(問遷地域)의 영양장해(營養障害)는 모두 대량원소(大量元素)가 일차적(一次的) 요인(要圍)이며 미량원소(微量元素)는 이차적(二次約)일 것으로 추정(推定)되었다.

• 한국지반공학회논문집
• /
• 제35권5호
• /
• pp.5-19
• /
• 2019

암반으로 구성되어 있는 급경사($65^{\circ}{\sim}85^{\circ}$)비탈면이 장기간 안정한 상태로 유지되고 있는 자연현상을 고려할 때, 설계 및 초기 시공 단계에서 위와 유사한 지반 상태로 이루어진 깎기 암반비탈면에 대해 1:0.5(발파암 경사 기준)보다 급한 경사를 적용할 수 있을 것이다. 급경사로 설계 가능한 양호한 연속체 암반비탈면의 안정성을 검토하는 과정에서, 설계실무 측면에서 범용적인 암반강도정수 산정방법이 필요하게 되었다. Hoek 등(2002)이 수정 보완하여 발표한 Hoek-Brown 파괴기준과 GSI분류는 불연속구조의 영향을 충분히 고려한 암반특성화 시스템으로 평가되었으며, 응력변화에 따라 등가 Mohr-Coulomb 강도정수(등면적법)를 산출하는 방법을 제안하였다. 비탈면에서는 등가 M-C 강도정수가 최대구속응력(${{\sigma}^{\prime}}_{3max}$ 또는 수직응력)변화에 따라 민감하게 변화하므로 실무적으로 활용하기에 어려운 점이 있다. 이 연구에서는 양호한 연속체 암반비탈면에 대해 최대구속응력 범위이내에서 범용적으로 적용할 수 있는 강도정수산정방법(등각분할법)을 H-B 파괴기준을 응용하여 제안한다. 등각분할법 강도정수(A)의 타당성 및 적용성을 평가하기 위해, 연구대상 암반비탈면을 기존 실시설계 현장 인근에 있는 급경사 비탈면에서 암석종류별(화성암, 변성암, 퇴적암)로 선정하고, Hoek이 제시한 등가 M-C 강도정수(등면적법)들과 비교 분석하였다. 등면적법 및 등각분할법 등가 M-C 강도정수는 기본적인 자료인 기존 실시설계 현장의 실내 암석 삼축압축시험과 연구대상 암반비탈면의 불연속구조의 특성조사(Face Mapping)를 통해 RocLab 프로그램(H-B 파괴기준을 기본으로 전산화된 지반정수 산정 소프트웨어)을 활용하여 산정하였다. 산정된 등면적법 등가 M-C 강도정수는 상호 연동되어 점착력과 내부마찰각이 아주 크거나($45^{\circ}$ 이상) 작게 나타났다. 등각분할법 등가 M-C 강도정수는 등면적법 등가 M-C 강도정수의 중간 정도이며, 내부마찰각은 $30^{\circ}{\sim}42^{\circ}$의 범위를 보인다. 연구대상 암반비탈면의 등각분할법 강도정수(A)와 기존 실시 설계 현장에서 연구대상 암반비탈면과 유사한 암반상태(동일 등급 RMR)에 적용한 강도정수(B)와 비교 분석하고, 이 지반정수들로 적용한 비탈면 안정해석(한계평형해석과 유한요소해석) 결과를 통해 제안한 등각분할법의 적용성을 간접적으로 평가하였다. A와 B의 강도정수 차이는 10% 정도이다. 한계평형해석 결과(우기 기준), A적용 안전율(Fs)=14.08~58.22(평균 32.9), B적용 안전율(Fs)=18.39~60.04(평균 32.2)이며, 각 동일한 암석종류에 따라 상호 유사하게 나타났다. 유한요소 해석 결과, A적용 변위=0.13~0.65mm(평균 0.27mm), B적용 변위=0.14~1.07mm(평균 0.37mm)으로 매우 유사하다. H-B 파괴기준을 응용하여 등각분할법으로 산출한 지반 정수를 실무적인 전단강도로 적용할 수 있는 적용성 평가에서 유의미한 결과를 확인할 수 있었다.

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.