• 제목/요약/키워드: Noodle Manufacturing Process

검색결과 6건 처리시간 0.024초

저열량 김치국수의 제조 및 품질특성 (Manufacturing and Quality Characteristics of Low Calori Kimchi Noodle)

  • 김형열;임흥열
    • 한국식생활문화학회지
    • /
    • 제20권3호
    • /
    • pp.315-322
    • /
    • 2005
  • Kimchi noodle have a original taste and characteristics. This noodle was used for sour kimchi, kimchi taste powder, red bean fiber and emulsified oil etc. with RS(resistant starch) premix as blended wheat flour mixed to resistant starch. For manufacturing process of this kimchi mixed dry noodle, suitable kimchi of $pH3.70{\sim}3.80$ was required storage period during $4{\sim}5days$ at room temperature. At this point, the suitable treating amount of sour kimchi was about 20%(w/w) level. Manufacturing of kimchi noodle could be at the suitable manufacturing condition from use of kimchi taste powder and red bean fiber etc. Calori of this kimchi noodle was 308.17Kcal/100g as low level than wheat flour noodle as 355.82Kcal/100g, decreasing effect of calori was about 13.39%. This kimchi noodle had a characteristic sour and hot taste, that wasn't required the special seasoning and/or soup at this result.

냉동 냉면류의 제조공정별 미생물학적 위해요소 평가 (Microbial Hazard Analysis of the Manufacturing Processes for Frozen Korean Cold Noodle, Naengmyeon)

  • 김유정;김혜진;임영은;양혜걸;박슬기;정진숙;엄애선
    • 급식외식위생학회지
    • /
    • 제3권1호
    • /
    • pp.38-44
    • /
    • 2022
  • This study investigated the microbiological hazards in the manufacturing processes of Naengmyeon. Sanitary indicative bacteria, such as aerobic plate counts and coliforms as well as pathogenic bacteria, were examined from raw materials, manufacturing processes, working area, 17 utensils and equipment. The aerobic plate counts for raw materials and arrowroot starch estimated as 0.77±0.68~5.02±0.28 and 5.02±0.28 log CFU/g, respectively. Coliforms were detected from wheat flour, buckwheat flour, and potato starch. Staphylococcus aureus was detected to be 0.61±1.06 log CFU/g in wheat flour and 0.20±0.35 log CFU/g in buckwheat flour. During the manufacturing process, aerobic plate counts for kneading process were 4.54±0.34 log CFU/g. But after the press out and heat process, contamination of aerobic plate counts and coliforms decreased and remained at a low level until the release process. Aerobic plate counts before washing disinfection of screw were 3.28±0.62 log CFU/100 cm2, the level of which was high in utensils and equipment that had contact with employees or water. These results represent not only an important indicator for the hygienic level but also a scientific basis for analyzing biological hazards, which lead to the introduction of HACCP for the production of safe and hygienic cold noodles processed by manufacturers.

디지털 트윈의 모듈화 기법 설계: 면 제조 공정을 중심으로 (Designing Modularization Method for Digital Twin: Focusing on the Noodle Manufacturing Process)

  • 권찬우;송석현
    • 정보처리학회 논문지
    • /
    • 제13권2호
    • /
    • pp.26-33
    • /
    • 2024
  • 최근에 들어 디지털 트윈 기술에 대한 관심이 급증하고 있다. 디지털 트윈은 컴퓨터 기반 시뮬레이션을 통해 물리적 현상이나 사물을 모사함으로써 대상을 최적화하는 기술이다. 현재는 특정 분야에 국한되는 프로세스를 최적화하기 위한 단일 디지털 트윈이 개발되고 있지만, 독립된 디지털 트윈만으로는 현실의 방대하고 복합적인 프로세스를 분석하기 어렵다. 이를 극복하고자 도입된 개념이 연합 디지털 트윈이다. 지금까지 연합 디지털 트윈의 연구 방향은 주로 도시와 같이 거시적인 대상을 최적화하는 방식에 중점을 두었다. 그러나 트윈이 상호 연계된다는 특성을 활용하면 기존에 구현되었던 단일 디지털 트윈의 모듈화도 가능할 것으로 보인다. 본 연구에서는 프로세스 최적화와 관련된 기능상의 관점에서 단일 디지털 트윈과 연합 디지털 트윈의 개념 및 상호 관계를 정립하고, 이를 토대로 연합 디지털 트윈을 활용한 단일 디지털 트윈의 모듈화 기법을 설계한다. 아울러, 실제 면 제조 공정 사례를 바탕으로 모듈화 기법을 적용한 모델을 설계함으로써 제안하는 방법론의 효용성을 논의하고자 한다.

발효 백미와 현미를 이용한 국수제조 및 품질특성 (Noodle Development and Its Quality Characteristics Using Fermented White and Brown Rice)

  • 서민정;강병원;박정욱;김민정;이혜현;정영기
    • 생명과학회지
    • /
    • 제22권10호
    • /
    • pp.1378-1383
    • /
    • 2012
  • 쌀을 이용하여 국수제조에 한계점을 개선하기 위하여 다양한 영양소를 함유한 현미를 사용하여 이를 발효한 후 국수를 제조하여 특성을 확인하였다. 국수는 백미와 현미를 이용하여 백미국수, 발효백미국수, 현미국수, 발효현미국수를 각각 제조하여 사용하였다. 제조된 국수의 일반성분 분석 결과 발효하였을 때 조단백질 함량은 증가 되었으며, 조지방, 탄수화물의 함량은 감소하였다. 또한 수분의 함량은 현미국수가 백미보다 2배 이상의 함량을 보였으며 발효하였을 때 약간 감소하는 것을 확인하였다. 색도는 발효함에 따라 약간의 변화는 있었으나 유의적인 차이는 나타나지 않았다. 조리시 중량, 부피는 증가하였으나 백미로 만든 국수에서 그 변화가 가장 낮았으며, 조리된 국물의 탁도는 백미로 만든 국수에서는 높게 나타났지만 다른 국수에서는 일정한 탁도를 나타내었다. 조리된 국수의 texture은 조리시에 수분의 함유로 조직이 부드러워짐에 따라 대부분 감소되었으나, 발효함에 따라 탄성도는 증대되었다. 따라서 영양학적 성분을 다량 함유하는 현미를 이용한 발효현미국수를 제조함으로서 쌀을 이용한 국수제조의 단점을 개선하고 현대인의 기호도에 적합한 쌀 가공식품으로의 개발이 가능하다고 사료된다.

보리-밀 복합분(複合粉)의 라면제조(製造) 및 제품특성(製品特性)에 관(關)하여 (A Note on the Preparation and Evaluation of Ramyon (deep fat fried instant noodle) Using Barley-wheat Composite Flours)

  • 유정희;최홍식;권태완
    • 한국식품과학회지
    • /
    • 제9권1호
    • /
    • pp.81-83
    • /
    • 1977
  • A study was conducted on the preparation of Ramyon using composite flours of raked barley (20 or 30%)-wheat(80 or 70%) in commercial plant scale and on the quality evaluation of Ramyon made from those flours. The naked barley(20%)-wheat(80%) flour gave acceptable Ramyon-making characteristics during the continuous Ramyon manufacturing process. The composite flours had a higher water absorption rate in kneading process and oil absorption value of the Ramyon product than those of wheat flour alone. Even though the Ramyon of composite flours showed a little inferior value compared with wheat flour alone in the cooking and texture characteristics, sensory panel scores of Ramyon indicated that the naked barley (20%)-wheat(80%) flour was acceptable in Ramyon.

  • PDF

당면의 제조공정별 미생물학적 위해요소 분석 (Microbial Hazard Analysis of Manufacturing Processes for Starch Noodle)

  • 천진영;양지혜;김민정;이수미;차명화;박기환;류경
    • 한국식품위생안전성학회지
    • /
    • 제27권4호
    • /
    • pp.420-426
    • /
    • 2012
  • 본 연구는 당면의 원 부재료 및 제조공정별 위해요소분석을 실시하여 현장에 적용할 수 있는 HACCP 관리를 위한 과학적 근거자료를 마련하고자 하였다. 원 부재료, 공정별, 최종 제품, 기기 및 기구류, 환경으로부터 샘플을 수집하고, 미생물 분석은 일반세균, 대장균군, 대장균, 장내세균과 병원성 세균 5종(B. cereus, E. coli O157:H7, L. monocytogenes, Salmonella spp., S. aureus)에 대해 실시하였다. 원재료인 고구마 전분은 일반세균 3.02 log CFU/g로 나타났고, 대장균군, 장내세균은 불검출되었다. 키토산과 냉각수에서 각각 일반세균 3.47 log CFU/g, 2.72 log CFU/g로 검출되었다. 코팅수는 일반세균, 대장균군, 장내세균이 각각 6.45 log CFU/g, 4.13 log CFU/g, 4.73 log CFU/g로 검출되었다. 반죽은 일반세균, 대장균군, 장내세균 각각 4.31 log CFU/g, 2.71 log CFU/g, 2.88 log CFU/g으로 나타났으며, 호화 후 시료에서 일반세균 1.63 log CFU/g으로 감소하였다. 그러나 호화 이후의 공정부터 꾸준히 증가하여 최종 제품까지 일반세균 수가 약 5 log CFU/g로 일정한 수준을 유지하였다. 같은 업체에서 생산된 제품이라도 물리적인 조작이 추가된 제품에서 미생물 오염도가 높게 나타났다. 모든 시료에서 대장균과 병원성 세균은 검출되지 않았다. 기기 및 기구류 중 면대와 면을 걸어두는 기구에서 각각 일반세균 1.83-5.74 log CFU/$100cm^2$, 3.34-4.48 CFU/$100cm^2$로 검출되어 불만족 수준으로 확인되었다. 따라서 교차오염을 방지하기 위해 기기 및 기구류의 적절한 세척 소독 관리가 필요한 것으로 사료된다. 구역별로 공중 낙하균의 오염도를 분석한 결과, 반죽실, 절단구역, 숙성실, 포장실은 청정구역으로 만족범위, 타개실과 건조실은 허용범위로 나타났다. 외부에 노출되어 있는 해동실의 경우 검출균수가 높게 나타났으며 문이나 개폐장치로 추가적인 관리가 필요한 것으로 보인다. 앞선 실험결과를 바탕으로 호화 공정을 미생물학적 관리 지점으로 관리해야 하며 교차오염 방지와 선행요건 프로그램으로 관리되어야 할 것이다.