• Steel and Composite Structures
• /
• 제28권1호
• /
• pp.1-11
• /
• 2018

In this paper, local ratcheting behavior of 1045 steel plates with circular cutout was investigated. Experimental tests were carried out by a Zwick/Roell HB 100 servo hydraulic machine. In order to measure the local strain at notch root, a data acquisition system with strain gauge was used. Various notch diameters and distances of strain gauges mounted from the notch root were found influential in the magnitude of local ratcheting strain. It was found that the local maximum principal stress plays a crucial role in increasing the local plastic deformation. Numerical simulation was done by ABAQUS software using nonlinear isotropic/kinematic hardening model. Material parameters of hardening model were attained from several stabilized cycles of flat specimens subjected to symmetric strain cycles. The nonlinear kinematic hardening model along with the Neuber's rule was employed to assess local ratcheting at the notch root of steel plates. The results of the numerical simulations agreed closely with those measured values in this study. Both ratcheting progress and mean stress relaxation occurred simultaneously at the notch root.

• Earthquakes and Structures
• /
• 제11권2호
• /
• pp.245-264
• /
• 2016

A suitable ground motion intensity measure (IM) plays a crucial role in the seismic performance assessment of a structure. In this paper, we introduce a scalar IM for use in evaluating the seismic response of single-layer reticulated domes. This IM is defined as the weighted geometric mean of the spectral acceleration ordinates at the periods of the dominant vibration modes of the structure considered, and the modal strain energy ratio of each dominant vibration mode is the corresponding weight. Its applicability and superiority to 11 other existing IMs are firstly investigated in terms of correlation with the nonlinear seismic response, efficiency and sufficiency using the results of incremental dynamic analyses which are performed for a typical single-layer reticulated dome. The hazard computability of this newly proposed IM is also briefly discussed and illustrated. A conclusion is drawn that this dominant vibration mode-based scalar IM has the characteristics of strong correlation, high efficiency, good sufficiency as well as hazard computability, and thereby is appropriate for use in the prediction of seismic response of single-layer reticulated domes.

• 유변학
• /
• 제10권4호
• /
• pp.234-246
• /
• 1998

본 연구의 목적은 고분자 농후용액의 정상유동특성(비선형 거동)과 소진폭 전단변형하에서의 동적 점탄성(선형 거동) 간에 존재하는 상관관계를 파악함에 있다. 이를 위해 Advanced Rheometric Expansion System(ARES)과 Rheometrics Fluids Spectrometer (RFS II)를 사용하여 폴리에틸렌 옥사이드, 폴리이소부틸렌 및 폴리아크릴 아마이드 농후용액의 정상류점도 및 동적 선형 점탄성을 광범위한 전단속도와 각주파수 영역에서 측정하였다. 이들 측정결과로부터 정상류점도와 동적점도 또는 동적 유동성간의 상관관계를 제시한 몇 가지 관계식의 적용성을 비교.검토하였다. 그리고 정상류점도와 복소점도의 절대치를 비교하여 양자간의 등가관계를 나타내는 Cox-Merz 법칙의 적용성에 대한 농도의 영향을 실험적으로 검증하였다. 나아가서 대변형하에서의 비선형성의 정도를 나타내는 비선형 스트레인 척도의 개념을 도입하여 Cox-Merz 법칙의 적용성에 미치는 영향을 이론적 관점에서 고찰하였다. 이상의 연구를 통해 얻어진 결과를 요약하면 다음과 같다. (1) 정상류점도의 전단속도 의존성과 동적 점탄성의 각주파수 의존성간에 제시된 여러 관계식들 중에서 정상류점도와 복소점도 절대치간의 등가관계를 나타내는 Cox-Merz법칙이 가장 우수한 적용성을 갖는다. (2) 높은 전단속도 또는 각주파수 영역에서는 정상류점도와 복소점도의 관계가 용액 농도에 따라 서로 상이하게 나타난다. 즉 낮은 농도의 용액에서는 정상류점도가 복소점도에 비해 다소 큰 값을 나타내며, 농도가 증가할수록 이러한 경향은 역전되어 높은 농도의 용액에서는 복소점도가 정상류점도에 비해 큰 값을 갖는다. (3) 비선형 스트레인 척도는 작은 크기의 변형량에서는 직선적으로 증가하다가 점차적으로 그 증가율이 감소하여 최대치에 도달한 후 그 이상의 변형량 영역에서는 변형량이 증가함에 따라 점차 감소하는 거동을 나타낸다. 이러한 거동은 스트레인 증가에 따라 진폭이 점차로 감소하는 감쇠진동함수의 형태를 갖는 이론적 예측과는 상당한 차이를 나타낸다. (4) 대변형하에서 비선형 스트레인 척도의 기울기 (고분자 용액의 비선형성의 정도)는 Cox-Merz 법칙의 적용성에 영향을 미치며, 이 값이 감소할수록 Cox-Merz 법칙은 더욱 잘 성립한다.

• 센서학회지
• /
• 제30권6호
• /
• pp.420-428
• /
• 2021

In this study, linearized sweeping of a wavelength sweeping laser was realized. This technique was used to measure the strain on a fiber Bragg grating(FBG) sensor. For linear sweeping, PID control over the wavelength difference between linear and nonlinear sweeping was employed. The performance test showed that linear sweeping with a 46 nm range and a 1 kHz frequency held up well with a 99.5 % decrement in nonlinearity after the 120th feedback. When attached to a strain gage, the FBG sensor registered strain that matched the data sheet within a difference of 4.5[με]. Altogether, linear sweeping can play a leading role in monitoring a safety of large SOC structures as well as in other wavelength sweeping laser related fields.

• 소성∙가공
• /
• 제16권2호
• /
• pp.101-106
• /
• 2007

Uniaxial displacement controlled tests were performed on annealed Type 304 stainless steel at room temperature. A servo-controlled testing machine and strain measurement on the gage length were employed to measure the response to a given input. The test results exhibit that the flow stress increases nonlinearly with the strain rate and the relaxed stress at the end of the relaxation periods depends strongly on the strain rate preceding the relaxation test. The rate-dependent inelastic deformation behavior is simulated using a new unified viscoplasticity model that has the rate-dependent format of nonlinear kinematic hardening rule, which plays a key role in modeling the rate dependence of relaxation behavior. The model does not employ yield or loading/unloading criteria and consists of a flow law and the evolution laws of two tensor and one scalar-valued state variables.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 1998년도 봄 학술발표회 논문집
• /
• pp.140-143
• /
• 1998

고분자 가공에서의 실제 공정 조건인 대변형하에서의 가공원액(고분자용융체 또는 농후용액)의 응답특성은 완제품의 기계적 또는 물리적 성질에 큰 영향을 미친다. 그러므로 고분자 액체의 유변학적 성질파악이 중요하며, 그 측정방법은 크게 정상전단실험과 동적전단실험으로 대별할 수 있다. 그러나 정상전달실험시에는 높은 전단속도하에서의 전단가열과 동시에 시료분해가 발생할 수 있다.(중략)

• 한국지반공학회논문집
• /
• 제19권2호
• /
• pp.189-197
• /
• 2003

본 논문은 공진주시험과 삼축압축시험을 이용하여 소변형률(0.0001%~l%) 범위에서 섬유혼합토의 변형 특성을 규명하였으며, 최대전단탄성계수를 잣대로 보강효과를 평가하였다. 또한 단섬유의 직경에 대한 길이의 비(형상비), 흙의 중량에 대한 섬유 중량의 섬유혼합비, 단섬유의 종류에 따른 보강효과를 비교 검토하였다. 시료는 주문진 표준사에 폴리프로필렌 재질의 단섬유를 무작위로 배합하여 사용하였다. 섬유혼합토의 최대전단탄성계수는 비혼합토에 비해 최대 30%까지 증가하였고, 비선형 영역에서의 전단탄성계수 감소량도 억제되었다. 형상비가 증가할수록 최대전단 탄성계수는 증가하고, 단사에 비해 망사의 보강 효과가 큰 것으로 나타났다. 섬유혼합비는 0.3 % 부근에서 보강효과가 가장 커, 최적인 것으로 확인되었다.

• 조명전기설비학회논문지
• /
• 제27권8호
• /
• pp.75-82
• /
• 2013

We propose a fiber grating sensor system for condition monitoring of large scale wind turbine blades. For the feasibility test of the proposed sensor system, a down-scaled wind turbine has been constructed and experimented. Fiber grating sensors were attached on a blade surface for distributed strain and temperature measurements. An optical rotary joint was used to transmit optical signals between the FBG sensor array and the signal processing unit. Instead of broadband light source, we used a wavelength-swept fiber laser to obtain high output power density. A spectrometer demodulation is used to alleviate the nonlinear wavelength tuning problem of the laser source. With the proposed sensor system we could measure dynamic strain and temperature profiles at multi-positions of rotating wind turbine blades.

• Korea-Australia Rheology Journal
• /
• 제11권4호
• /
• pp.293-304
• /
• 1999

Refinements of classical theories for entangled or crosslinked polymeric systems have led to incommensurable models for rubber networks and polymer melts, contrary to experimental evidence, which suggests a great deal of similarity. Uniaxial elongation and compression data of linear and branched polymer melts as well as of crosslinked rubbers were analyzed with respect to their nonlinear strain measure. This was found to be the result of two contributions: (1) affine orientation of network strands, and (2) isotropic strand extension. Network strand extension is caused by an increasing restriction of lateral movement of polymer chains due to deformation, and is modelled by a molecular stress function which in the tube concept of Doi and Edwards is the inverse of the relative tube diameter. Up to moderate strains, $f^2$ is found to be linear in the average stretch for melts as well as for rubbers, which corresponds to a constant tube volume. At large strains, rubbers show maximum extensibility, while melts show maximum molecular tension. This maximum value of the molecular stress function governs the ultimate magnitude of the strain-hardening effect of linear and long-chain branched polymer melts in extensional flows.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2001년도 봄 학술발표회 논문집
• /
• pp.533-540
• /
• 2001

Material damping is an important parameter to evaluate the site response by a dynamic loading. Currently the material damping of the subgrade is mainly determined by a resonant column testing. Typical methods to evaluate material damping include half-power bandwidth method and free-vibration decay method. In the large strain range, the half-power bandwidth method gives an erratic damping factor, because the method is based on the assumption of the linear behavior of a specimen. The free-vibration decay method has also limitations in that the damping factors vary with the range of cycles in calculation, and also in that the specific shear strain can not be designated for the free vibration. In this study, the frequency-phase method, which was developed to evaluate material damping of a beam simply supported, is introduced to evaluate the material damping by the resonant column testing. Also, the comparison among half-power method, free-vibration decay method and the frequency-phase method is provided for a remolded sand.