• 한국추진공학회지
• /
• 제5권1호
• /
• pp.69-75
• /
• 2001

터보프롭 엔진의 성능진단을 위한 선형 GPA(Gas Path Analysis) 및 비선형 GPA 프로그램을 개발하고 최적 계측 변수 선정을 위한 해석을 수행하였다. 엔진의 손상은 압축기 오염과 압축기 터빈 및 동력터빈의 부식이 동시에 발생하는 경우를 가정하였다. 먼저 비선형 GPA에서 반복기법에 대한 영향을 알아보기 위해 독립변수의 저하량을 등간격으로 나누어 반복 해석한 경우와 Newton-Raphson법을 이용하여 해석한 경우를 선형 GPA 해석 결과와 비교하였다. 해석 결과 비선형 GPA의 성능은 반복기법에 의해 많은 영향을 받음을 알 수 있었다. 다음 계측변수 수에 대한 영향을 알아보기 위해 계측변수를 6개, 8개, 10개로 달리하여 각각 선형 GPA 기법과 비선형 GPA 기법을 이용하여 해석을 수행한 후 RMS 오차를 비교하였다. 해석 결과 계측변수가 많으면 보다 정확한 진단 결과를 얻을 수 있으나 계측변수를 잘 선정한다면 보다 적은 계측변수로도 신뢰성 있는 결과를 얻을 수 있음을 확인하였다. 또한 비선형 GPA 기법을 이용한 경우의 RMS 오차가 선형 GPA 기법을 이용한 경우보다 적어 비선형 GPA 기법의 유용성을 알 수 있었다.

• International Journal of Railway
• /
• 제8권2호
• /
• pp.50-54
• /
• 2015

The primary function of the trackbed in a conventional railway track system is to decrease the stresses in the subgrade to be in an acceptable level. A properly designed trackbed layer performs this task adequately. Many design procedures have used assumed and/or are based on critical stiffness values of the layers obtained mostly in the field to calculate an appropriate thickness of the sublayers of the trackbed foundation. However, those stiffness values do not consider strain levels clearly and precisely in the layers. This study proposes a method of computation of stiffness that can handle with strain level in the layers of the trackbed foundation in order to provide properly selected design values of the stiffness of the layers. The shear modulus values are dependent on shear strain level so that the strain levels generated in the subgrade in the trackbed under wheel loading and below plate of Repeated Plate Bearing Test (RPBT) are investigated by finite element analysis program ABAQUS and PLAXIS programs. The strain levels generated in the subgrade from RPBT are compared to those values from RC (Resonant Column) test after some consideration of strain levels and stress consideration. For comparison of shear modulus G obtained from RC test and stiffness moduli $E_{v2}$ obtained from RPBT in the field, many numbers of mid-size RC tests in laboratory and RPBT in field were performed extensively. It was found in this study that there is a big difference in stiffness modulus when the converted $E_{v2}$ values were compared to those values of RC test. It is verified in this study that it is necessary to use precise and increased loading steps to construct nonlinear curves from RPBT in order to get correct $E_{v2}$ values in proper strain levels.

• 한국항해학회지
• /
• 제7권2호
• /
• pp.1-45
• /
• 1983

This paper concerns the applications of the Kalman filter to navigation and the develment of computer programs of the navigational calculations. Methods to apply the Kalman filter to celestial fix, fix by cross bearing and cocked hat are proposed, and numerical simulations under various noise conditiions are conducted. The accuracy of the optimal positions obtained by the Kalman filter is compared with that of the fixed positiions by radial error method. In the case of celestial fix, an algorithm to estimate the optimal positions by using the linear Kalman filter is presented. The optimal positions by the Kalman filter are compared with the running fixes and with the most probable positions obtained from a single line of position. It is confirmed that the resutls of the proposed method are more accurate than the others. In practical piloting, bearings are generally measured intermittently and the measurement process is nonlinear. It is, therefore, difficult for us to apply the Kalman filter to fix by cross bearing. In order to be used in such an unfavorable case, the extended Kalman filter is revised and the aplicability of the revised extended Kalman filter is checked by numerical simulation under various noise conditions. In a cocked hat, an inside or outside fix is dependent only upon azimuth spread, if the error of each line of position is assumed to be equal both in magnitude and sign. A new technique of selecting a ship's position between an inside fix and an outside fix in a cocked hat by using fix determinant derived from the equation of three lines of position is also presented. The relations among the optimal position by Kalman filter, incentre (or excentre) and random error centtre of the cocked hat are discussed theoretically and the accuracy of the optimal position is compared with that of the others by numerical simulation.

• 한국방사선학회논문지
• /
• 제13권4호
• /
• pp.597-603
• /
• 2019

임상에서 사용하는 진단 검사 장치인 전산화 단층촬영기(CT)를 이용하여 Dicom 파일을 획득하였습니다. Dicom 파일과 3D 프로그램, 3D 프린터로 손가락 보조기(Finger brace)를 제작하였습니다. 손가락 보조기(Finger brace)는 인체를 대상으로 하기 때문에 형태의 정밀도가 매우 중요합니다. 3D Print는 정밀도가 우수하고, 재료가 다양하고, 출력 시간이 짧은 이점이 있습니다. 임상에서는 알루미늄 보호대나 의료기 업체의 손가락 보호대가 한정적입니다. 3D 프린터로 손가락 보조기(Finger brace)를 제작하면, 환자의 손가락 외상, 질병, 변형의 치료에 이용할 수 있는 정밀한 형태의 맞춤형 손가락 보조기(Finger brace)를 환자에게 적용할 수 있을 것이라고 기대합니다.

• Steel and Composite Structures
• /
• 제50권6호
• /
• pp.627-641
• /
• 2024

This paper presents an experimental and numerical study to investigate the behavior of the precast segmental concrete beams (PSCBs) utilizing high-strength concrete (HSC) connected in the zone of the maximum bending moment using steel extended endplate connections (EECs). The experimental study consisted of five beams as follows: The first beam was the control beam for comparison, which was an unconnected one-piece beam made of HSC. The other four other beams consisted of two identical pieces of precast concrete. An important point to be noted is that at the end of each piece, a steel plate was used with a thickness of 10 mm. Moreover, this steel plate was welded to the lower and upper reinforcing bars of the beam. Furthermore, the steel plate was made to connect the two pieces using the technique of EECs. Several variables were taken in these four beams, whether from the shape of the connection or enhancing the behavior of the connection using the post-tensioning technique. EECs without stiffeners were used for some of the tested beams. The behavior of these connections was improved using stiffeners and shear bolts. To get accurate results, a comparison was made between the behaviors of the five beams. Another important point to be noted is that Abaqus and SAP2000 programs were used to investigate the behavior of PSCBs and to ensure the accuracy of the modeling process which showed a good agreement with the experimental results. Additionally, the simplified modeling using SAP2000 was able to model the nonlinear behavior of PSCBs connected using steel EECs. It was found that the steel pre-tensioned bolted EECs, reinforced with steel stiffeners and shear anchors, could be used to connect the precast HSC segmental beams via the internal pre-stressing technique.

• 한국철도학회논문집
• /
• 제16권5호
• /
• pp.386-393
• /
• 2013

본 연구에서는 궤도 하부 노반상에서 다짐도 확인 및 강화노반 두께 결정을 위하여 사용되는 변형계수 $E_{v2}$ 측정방법의 적절성과 측정값의 유효성을 검토하였다. 이를 위하여 반복평판재하시험(RPBT)을 실시하고 평판직하부에서 발생하는 압축변형률을 파악하였다. 동일 흙노반재료에 대한 공진주시험으로부터 획득된 전단탄성계수감소곡선과 $E_{v2}$를 비교하였다. 실 현장 RPBT의 발생변형률 수준과 변형계수의 크기가 합리적인지를 분석하기 위하여 응력조건과 대표 평균변형률계수($I_z$) 보정에 의해 반복평판재하시험 변형계수($E_{v2}$)를 재평가하였다. PLAXIS 프로그램을 이용하여 깊이에 따른 변형률 영향계수($I_z$)를 재산정하여 반복평판재하시험 결과($E_{v2}$) 해석에 미치는 변형률 영향계수의 영향을 분석하였으며 ABAQUS를 이용하여 3D궤도구조에서 노반이 받는 변형률수준을 확인하였다. 궤도하부구조가 경험하는 변형률수준에서의 변형계수 $E_{v2}$를 획득하기 위해서는 노반의 비선형성을 구현할 수 있도록 현 반복평판재하시험의 하중단계를 세분화할 필요성을 확인하였다.

• 한국물환경학회지
• /
• 제34권4호
• /
• pp.375-381
• /
• 2018

The monitoring of phytoplankton biomass and community structure is essential as a first step to control the harmful cyanobacterial blooms in freshwater systems, such as seen in rivers and lakes, due to the process of eutrophication and climate change. In order to quantify the biomass of phytoplankton with a wide range in size and shape, the measurement of cell biovolume along with cell density is required for a comprehensive review on this issue. However, most routine monitoring programs preserve the gathered phytoplankton samples before analysis using chemical additives, because of the constraint of time and the number of samples. The purpose of this study was to investigate the cell biovolume change characteristics of six cyanobacterial species, which are common bloom-causing cyanobacteria in the Nakdong River, after the preservation with Lugol's iodine solution. All species showed a statistically significant difference after the addition of Lugol's iodine solution compared to the live cell biovolume, and the cell biovolume decreased to the level of 34.0 ~ 56.3 % at maximum in each species after the preservation. The nonlinear regression models for determining the shrinkage ratio by a preservation period were derived by using the cell biovolume measured until 180 days preservation of each target species, and the equation to convert the cell biovolume measured after preservation for a certain period to the cell biovolume of viable cell was derived using that formula. The conversion equation derived from this study can be used to estimate the actual cell biovolume in the natural environment at the time of sampling, by using the measured biovolume after the preservation in the phytoplankton monitoring. Moreover this is expected to contribute to the final interpretation of the water quality and aquatic ecosystem impacts due to the cyanobacterial blooms.