• 한국산학기술학회논문지
• /
• 제15권6호
• /
• pp.3435-3441
• /
• 2014

차량의 시트 재질로 사용되는 폴리우레탄 폼의 모델링 및 동특성 예측은 승객의 승차감 향상을 위해 매우 중요하다. 본 연구에서는 폴리우레탄 폼의 정특성 시험을 통해 비선형 강성과 점탄성 특성의 시간변수 파라미터를 구하였다. 다항식과 컨벌루션 적분법을 이용하여 폴리우레탄 폼의 비선형 특성과 점탄성 특성을 수학적으로 모델링하였다. 이와 같은 비선형 진동 모델에 대하여 수치적분 방법을 이용하여 시트 바닥 변위에 대한 진동 응답을 계산하였다. 폴리우레탄 폼의 비선형 특성과 점탄성 특성이 진동계에서 미치는 영향을 단순 1자유도계와 인체모델을 이용하여 분석하였다. 결과적으로 폴리우레탄 폼의 점탄성 특성이 승차감을 위한 설계파라미터로 고려되어야 하는 것으로 나타났다.

• 한국산학기술학회논문지
• /
• 제13권12호
• /
• pp.5689-5695
• /
• 2012

본 연구에서는 차량에 적용되는 시트 재질인 폴리우레탄 폼의 점탄성 특성을 고려하여 시트와 인체의 진동특성을 시험 및 수치해석 방법을 이용하여 분석하였다. 압축 시험을 통해 폴리우레탄 폼의 점탄성 특성인 비선형성과 준-정역학적 특성을 구하였다. 또한 컨벌루션 적분법 및 비선형 강성 모델을 이용하여 폴리우레탄 폼의 점탄성 특성을 수학적으로 모델링하였다. 시트의 승차감 기여도를 분석하기 위하여 시트의 동역학 모델과 ISO5982의 표준 인체 수직진동 모델을 이용하여 수직 진동모델을 구성하고 관련 운동방정식을 유도하였다. 비선형 운동방정식은 Runge-Kutta 적분법을 이용하여 수치해석 시뮬레이션을 수행하였다. 철도차량의 차체 바닥에서 측정한 진동가속도 입력에 대한 시트와 인체의 응답 특성을 분석하고 시트 설계 파라미터에 대한 승차감 지수 값들의 변화를 분석하여 시트 설계에 대한 방법론을 제시하고자 한다.

• International Journal of Automotive Technology
• /
• 제5권2호
• /
• pp.135-144
• /
• 2004

In this paper, the model-matching control in the longitudinal autonomous driving system is investigated by vehicle dynamics simulation, which contains nonlinear subcomponents and simplified subcomponents. The design of the robust model-matching controller is performed by the characteristics of the 2 degrees of freedom controller, which is composed of the feedforward compensator and the feedback compensator. It makes the characteristics of tractive and brake force to be equivalent to the specific transfer function, which is suggested as the reference model. Mathematical models of vehicle dynamic analysis including the model-matching control are constructed for computer simulation. Then, simple examples on open-loop simulation without any controller and closed loop simulation with the model-matching controller are applied to check the validity of the robust controller. As the practical example, the autonomous driving system in the longitudinal direction is adopted. It is proved that the model-matching control is effective and adequate to the disturbances and the perturbations, which are shown in the responses of the change of a vehicle mass and a road gradient.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 추계학술대회논문집
• /
• pp.460-465
• /
• 2008

This paper proposes a new type of MR (magentorheological) fluid based suspension system and applies it to military vehicle for vibration control. The suspension system consists of gas spring and MR damper. The nonlinear behavior of spring characteristics is evaluated with respect to the wheel travel and damping force model due to viscosity and yield stress of MR fluid is derived. Subsequently, a military vehicle of 6WD is adopted for the integration of the MR suspension system and its nonlinear dynamic model is establishes by considering vertical, pitch and roll motion. Then, a sky-hook controller associated with semi-active actuating condition is designed to reduce the vibration. In order to demonstrate the effectiveness of the proposed MR suspension system, computer simulation is undertaken showing vibration control performance such as roll angle and pitch angle evaluated under bump and random road profiles.

• 한국소음진동공학회논문집
• /
• 제19권1호
• /
• pp.17-23
• /
• 2009

This paper proposes a new type of MR(magnetorheological) fluid based suspension system and applies it to military vehicle for vibration control. The suspension system consists of gas spring and MR damper. The nonlinear behavior of spring characteristics is evaluated with respect to the wheel travel and damping force model due to viscosity and yield stress of MR fluid is derived. Subsequently, a military vehicle of 6WD is adopted for the integration of the MR suspension system and its nonlinear dynamic model is established by considering vertical, pitch and roll motion. Then, a sky-hook controller associated with semi-active actuating condition is designed to reduce the imposed vibration. In order to demonstrate the effectiveness of the proposed MR suspension system, computer simulation is undertaken showing vibration control performance such as roll angle and pitch angle evaluated under bump and random road profiles.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.458-463
• /
• 2000

This paper presents a design of the controller for vehicle lateral dynamics using active yaw moment. Vehicle lateral motion is incorporated with directional controllability and stability. These are conflicting each other from the view of vehicle handling performance. To compromise the trade-off between these two aspects, we suggest a new control algorithm based on the sliding mode with time-varying switching surface according to the body side slip angle. The controller can deal with the nonlinear region in vehicle driving and be robust to the parameter uncertainties in the plant model. Control performance was evaluated from the simulation.

• 자동차안전학회지
• /
• 제14권4호
• /
• pp.16-20
• /
• 2022

Accurate state estimation is important for autonomous driving. However, the estimation error increases in situations that a lot of longitudinal slip occurs. Therefore, this paper presents a vehicle state estimation method using an Extended Kalman Filter. The filter estimates the states of the host vehicle robust to wheel slip. It utilizes the measurements of the four-wheel rotational speeds, longitudinal acceleration, yaw-rate, and steering wheel angle. Nonlinear measurement model is represented by Ackermann Model. The main advantage of this approach is the accurate estimation of yaw rate due to the measurement of the steering wheel angle. The proposed algorithm is verified in scenarios of autonomous emergency braking (AEB), lane change (LC), lane keeping (LK) using an automated vehicle. The results show that the proposed algorithm guarantees accurate estimation in such scenarios.

• 한국정밀공학회지
• /
• 제20권5호
• /
• pp.82-91
• /
• 2003

Vehicle dynamics control (VDC) has been a breakthrough and become a new terminology for the safety of a driver and improvement of vehicle handling. This paper examines the usefulness of a brake steer system (BSS), which uses differential brake forces for steering intervention in the context of VDC, In order to help the car to turn, a yaw moment can be achieved by altering the left/right and front/rear brake distribution. The steering function achieved through BSS can then be used to control lateral position in an unintended road departure system. An 8-DOF non-linear vehicle model including STI tire model will be validated using the equations of motion of the vehicle, and the non-linear vehicle dynamics. Since fuzzy logic can consider the nonlinear effect of vehicle modeling, fuzzy controller is designed to explore BSS feasibility, by modifying the brake distribution through the control of the yaw rate of the vehicle. The control strategies developed will be tested by simulation of a variety of situation; the possibility of VDC using BSS is verified in this paper.

• 한국자동차공학회논문집
• /
• 제7권9호
• /
• pp.105-111
• /
• 1999

The paper presents development of a Hardware-In-the-Loop simulation (HILS) system for the purpose of testing performance, stability, and reliability of an electronic power steering system(EPS). In order to realistically test an EPS by the proposed HILS apparatus, a simulated uniaxial dynamic rack force is applied physically to the EPS hardware by a pnumatic actuator. An EPS hardware is composed of steering wheel &column, a rack & pinion mechanism, andas motor-driven power steering system. A command signal for a pneumatic rack-force actuator is generated from the vehicle handling lumped parameter dynamic model 9software) that is simulated in real time by using a very fast digital signal processor. The inputs to the real-time vehicle dynamic simulation model are a constant vehicle forward speed and from wheel steering angles driven through a steering system by a driver. The output from a real-time simulation model is an electric signal that is proportional to the uniaxial rack force. The vehicle handling lumped parameter dynamic model is validated by a fully nonlinear constrained multibody vehicle dynamic model. The HILS system simulation results sow that the proposed HILS system may be used to realistically test the performance stability , and reliability of an electronic power steering system is a repeated way.

• Journal of Electrical Engineering and Technology
• /
• 제10권5호
• /
• pp.2162-2169
• /
• 2015

Cruise control is a technology for automatically maintaining a steady speed of vehicle as set by the driver via controlling throttle valve and brake of vehicle. In this paper we investigate cruise controller design method with consideration for distance to vehicle ahead. We employ linear time varying (LTV) model to describe longitudinal vehicle dynamic motion. With this LTV system we approximately model the nonlinear dynamics of vehicle speed by frequent update of the system parameters. In addition we reformulate the LTV system by transforming distance to leading vehicle into variation of system parameters of the model. Note that in conventional control problem formulation this distance is considered as disturbance which should be rejected. Consequently a controller can be designed by pole placement at each instance of parameter update, based on the linear model with the present system parameters. The validity of this design method is examined by simulation study.