• JSTS:Journal of Semiconductor Technology and Science
• /
• v.10 no.2
• /
• pp.152-159
• /
• 2010

We propose a semi-analytical current conduction model for depletion-mode n-type nanowire field-effect transistors (NWFETs) with top-gate structure. The NWFET model is based on an equivalent circuit consisting of two back-to-back Schottky diodes for the metal-semiconductor (MS) contacts and the intrinsic top-gate NWFET. The intrinsic top-gate NWFET model is derived from the current conduction mechanisms due to bulk charges through the center neutral region as well as of accumulation charges through the surface accumulation region, based on the electrostatic method, and thus it includes all current conduction mechanisms of the NWFET operating at various top-gate bias conditions. Our previously developed Schottky diode model is used for the MS contacts. The newly developed model is integrated into ADS, in which the intrinsic part of the NWFET is developed by utilizing the Symbolically Defined Device (SDD) for an equation-based nonlinear model. The results simulated from the newly developed NWFET model reproduce considerably well the reported experimental results.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.53 no.8
• /
• pp.500-508
• /
• 2004

This paper presents a new sensorless vector control system for high performance induction motor drives fed by a matrix converter with non-linearity compensation and disturbance observer. The nonlinear voltage distortion that is caused by commutation delay and on-state voltage drop in switching device is corrected by a new matrix converter modeling. The lumped disturbances such as parameter variation and load disturbance of the system are estimated by the radial basis function network (RBFN). An adaptive observer is also employed to bring better responses at the low speed operation. Experimental results are shown to illustrate the performance of the proposed system.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.15 no.5
• /
• pp.398-405
• /
• 2002

The degradation characteristics of MgO additive for the ZnO ceramic devices fabricated by the standard ceramic techniques are investigated in this study. These devices were made from basic Matsuoka's composition. Especially, MgO was added to analyze the degradation characteristics and devices were sintered in air at $1200^{\circ}C$. The conditions of DC degradation test were $115\pm2^{\circ}C$ for 12h. Using XRD and SEM, the phase and microstructure of samples were analyzed, respectively. The elemental analysis in the microstructures was performed by EDS, E-J analysis was used to determine $\alpha$. Frequency analysis was accomplished to understand the relationship between $R_G$ and $R_B$ with the electric stress at the equivalent circuit.

• Proceedings of the KIEE Conference
• /
• 2003.07b
• /
• pp.915-917
• /
• 2003

In this paper, a 3D shape optimization algorithm which guarantees a smooth optimal shape is presented using parameterized sensitivity analysis. The design surface is parameterized using Bezier spline and the control points of the spline are taken as the design variables. The parameterized sensitivity for the control points are found from that for nodal Points. The design sensitivity and adjoint variable formulae are also derived for the 3D non-linear problems. Through an application to the shape optimization of 3D electromagnet to get a uniform magnetic field, the effectiveness of the proposed algorithm is shown.

• Journal of the Optical Society of Korea
• /
• v.3 no.1
• /
• pp.27-31
• /
• 1999

The two-photon absorption of a SiC photodiode was utilized to obtain autocorrelation signals of the pulses from a mode-locked Rh6G dye laser. The autocorrelation signals were in good agreement with those obtained by a conventional autocorrelator using a second harmonic crystal and photomultiplier tube. The sensitivity of the autocorrelator with the SiC photodiode was about $4{\times}10^3 {(mW)}^2$ . From these results it was demonstrated that the SiC photodiode is suitable as a nonlinear device for an autocorrelation measurement in the visible range.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.18 no.12
• /
• pp.1317-1326
• /
• 2008

This paper presents a self.levelling system for a mass, which undergoes a severe acceleration, with integrated displacement feedback control. After a general description of such a system, theoretical analysis is investigated to design an active control device. The self-levelling system can be used to reduce the "quasi-static" deflection while isolating the "dynamic" vibration. A computer simulation model of 45 kg with two air spring mounts is considered to predict the performance of the control system. Important control parameters were acquired to meet the requirement of the system. The results showed the controller can reduce the displacement of the mass to the level of about 1/5 after control. Thus the self-levelling system can be applied usefully to reduce the displacement of a mass which experiences a high g dynamics.

• Journal of Power Electronics
• /
• v.18 no.6
• /
• pp.1901-1911
• /
• 2018

This study presents a circuit model for simulating the switching transients of insulated-gate bipolar transistors (IGBTs) with inductive load switching. The modeling approach used in this study considers the behavior of IGBTs and freewheeling diodes during the transient process and ignores the complex semiconductor physics-based relationships and parameters. The proposed circuit model can accurately simulate the switching behavior due to the detailed consideration of device-circuit interactions and the nonlinear nature of model parameters, such as internal capacitances. The developed model is incorporated in an IGBT loss calculation module of an electromagnetic transient simulation program to enable the estimation of switching losses in voltage source converters embedded in large power systems.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.71.4-71
• /
• 2001

This paper presents swing up and stabilization control of an underactuated two-link robot called the Pendubot. This device is a two-link planar robot with an actuator at the shoulder, but no actuator at the elbow. The controller swings up first link from its open loop stable equilibrium point to the unstable equilibrium point and then, catches the unactuated second link to balance it there. Two control algorithms are used for this task. Proportional Derivative Control technique is used to design the swing up control. The linear model of Pendubot is obtained by linearizing the nonlinear dynamic equations about the desired equilibrium point and LQR technique is used to design a stabilization controller.

• Bulletin of the Korean Chemical Society
• /
• v.20 no.5
• /
• pp.567-572
• /
• 1999

5-Nitro-2-(2'-vinyloxyethoxy)benzylidenemalononitrile (2a), methyl 5-nitro-2-(2'-vinyloxyethoxy)benzylidenecyanoacetate (2b), 3-nitro-4-(2'-vinyloxyethoxy)benzylidenemalononitrile (4a), methyl 3-nitro-4-(2'-vinyloxyethoxy)benzylidenecyanoacetate (4b), 2-nitro-5-(2'-vinyloxyethoxy)benzylidenemalononitrile (6a), and methyl 2-nitro-5-(2'-vinyloxyetboxy)benzylidenecyanoacetate (6b) were prepared by the condensation of 5-nitro-2-(2'-vinyloxyethoxy)benzaldehyde (1), 3-nitro-4-(2'-vinyloxyethoxy)benzaldehyde (3), and 2-nitro-5-(2'-vinyloxyethoxy)benzaldehyde (5) with malononitrile or methyl cyanoacetate, respectively. Vinyl ether monomers 2a-b, 4a-b, and 6a-b were polymerized with boron trifluoride etherate as a cationic initiator to yield poly(vinyl ethers) 7-9 having oxynitrobenzylidenemalononitrile and oxynitrobenzylidenecyanoacetate, which is effective chromophore for second-order nonlinear optical applications. Polymers 7-9 were soluble in common organic solvents such as acetone and DMSO. Tg values of the resulting polymers were in the range of 67-83 ℃. Electrooptic coefficient (r33) of the poled polymer films were in the range of 15-27 pm/V at 633 nm. Polymers 7-9 showed a thermal stability up to 300 ℃ in TGA thermograms, which is acceptable for NLO device applications.

• Smart Structures and Systems
• /
• v.23 no.4
• /
• pp.337-345
• /
• 2019

This work resumes a research that proposes the use of the technique based on the dissipation energy of the shape memory alloy (SMA) ties. It focuses principally on the assessment of the effectiveness of the use of these smart materials on displacements, accelerations and the stresses of the minaret of the great mosque of Ajloun in Jordan. The 3-D finite element model of the minaret is performed by the ANSYS software. First of all, the proposed model is calibrated and validated according to the experimental results gathered from ambient vibration testing results. Then, a nonlinear transient analysis is considered, when the El-Centro earthquake is used as the input signal. Different simulating cases concerning the location, number and type of SMA devices are proposed in order to see their influence on the seismic response of the minaret. Hence, the results confirm the effectiveness of the proposed SMA device.