• Journal of the Korean Wood Science and Technology
• /
• 제32권4호
• /
• pp.74-81
• /
• 2004

비파괴 시험 방법 중 초음파 방법을 이용하여, 목재의 열화상태를 진단하였다. 기초 자료로서, 목재 내 온도변화에 따른 초음파 전송속도의 변화, 목재 내 함수율변화에 따른 초음파 전송속도 변화, 목재 강제부후에 의한 중량감소와 초음파 전송속도 변화를 검토하였다. 또한 원목의 비파괴 시험 등을 수행하고, 초음파 전송속도에 근거한 부후분포도를 작성하여 고목재의 열화 진단을 하였다. 일련의 시험들을 통하여 비파괴 방법에 의한 목재 열화진단을 위한 데이터를 축적하고, 이를 고목재에 적용하여 목재 내부의 부후분포도를 작성함으로써 금후 고목재의 비파괴 방법에 의한 부후탐지의 가능성을 검토하였다.

• 한국가구학회지
• /
• 제20권6호
• /
• pp.599-604
• /
• 2009

For the search of unified law of moisture movement in wood, moisture distribution of Korean red pine at non-steady state was investigated. We assume that the equilibrium moisture content (EMC) in wood depends on only temperature and relative humidity, it can be control in temperature and humidity chamber. If temperature is constant and humidity or vapor pressure is changed with sin curve shape at adequate cycles, EMC in chamber can be changed as well with sin-curve shape. The setup condition of a non-steady state in humidity control chambers is a constant temperature at $20^{\circ}C$ and 15+10 sin ${\omega}t$ percent EMC. It can be found that the distribution of moisture in the specimen with varying relative humidity are illustrated various types. Moisture in wood is complicated and vibrates with the moisture sorption process. Considering a unified law of moisture movement in wood, it is considered that the most important fact is to search the method of precise diffusion & transfer coefficients.

• 유기물자원화
• /
• 제18권3호
• /
• pp.87-91
• /
• 2010

목재 및 비목재 재료는 여과재료로 광범위하게 사용되고 있다. 작은 입자(${\sim}5{\mu}m$)를 여과하는데 사용될 수 있는 구조를 가지기 때문이며, 상대적으로 원가가가 저렴한 재료이다. 이 화이버 필터는 비점오염원을 여과하는데 있어서 목재 및 비목재 재료의 몇 가지 물리적 성질, 특히 입자의 여과에 관하여 주목을 받는 차별화되는 특성을 가지고 있다. 또한, 이들 재료는 각각의 섬유들이 가지는 다양성과 형태로 인하여 비정형성과 복잡한 다공성구조를 형성한다.

• Journal of the Korean Wood Science and Technology
• /
• 제48권6호
• /
• pp.820-831
• /
• 2020

참나무시들음병 고사목으로부터 피해확산을 막기위해 주로 훈증처리 방법을 이용한다. 훈증처리에 따른 신갈나무 피해목의 강도적 활용 가능성을 검증하기 위해 훈증처리목재의 압축성능과 휨성능평가를 수행하였다. 훈증처리목재는 약 9개월 간 네마섹트(Metam-sodium)로 훈증처리하였다. 참나무시들음병 훈증처리목재의 기건 종압축강도는 58.87 MPa, 압축탄성계수는 5.66 GPa로 측정되었으며 건전목과 비슷한 경향을 보였다. 혼증목의 성숙재부 강도성능은 미성숙재부보다 16% 더 높은 강도값을 보였다. 참나무 건전목의 압축파괴형상은 다양한 형상으로 나타나지만 훈증처리목재의 경우 대부분 전단형 파괴형상을 보였다. 훈증처리목재의 휨강도는 157.43 MPa로 건전재보다 8% 높게 측정되었고 휨 탄성계수는 16.38 GPa로 건전재보다 16% 낮게 측정되었다. 그러나 훈증처리목재의 휨강도성능치에 대한 변동계수는 건전목보다 낮은 것을 확인하였다.

• Journal of the Korean Wood Science and Technology
• /
• 제41권3호
• /
• pp.187-200
• /
• 2013

본 연구에서는 목재보존제의 최근 국제적 동향 중, 비 구리계 약제를 중심으로 조사되었다. 최근의 목재보존제 연구 분야에서 다루어지는 비 구리계 약제로는 환경친화적 수용성약제 성분의 대표적인 붕소계 화합물이 가장 많았고, 자연에서 얻어지는 천연물질을 이용한 약제, 화학처리목재, pyrethroid계 방충제 등이 포함되었다. 인축 및 환경에 대한 사용안전성이 고려된 약제들이 주 연구대상이 되는 경향이 있었다. 붕소의 경우에는 옥외 사용 시 물에 대한 용탈성을 개선하기 위하여 다양한 고분자 등의 물질을 도입하여 정착성을 높이고자 하는 연구들이 주요 이슈였다. 또한 의학 분야에서 많이 다루어지던 천연물질이 목재보존제로써 사용하고자 하는 시도와 치수안정성을 목적으로 개발되었던 아세틸화 목재와 같은 화학수식목재에 대한 옥외 사용 시도가 눈에 띄게 증가된 경향을 나타내었다.

• Journal of the Korean Wood Science and Technology
• /
• 제47권4호
• /
• pp.486-497
• /
• 2019

The non-isothermal and isothermal pyrolysis properties of H lignin and P lignin extracted from different biorefinery processes (such as supercritical water hydrolysis and fast pyrolysis) were studied using thermogravimetry analysis (TGA) and pyrolyzer-gas chromatography/mass spectrometry (Py-GC/MS). The lignins were characterized by ultimate/proximate analysis, FT-IR and GPC. Based on the thermogravimetry (TG) and derivative thermogravimetry (DTG) curves, the thermal decomposition stages were obtained and the pyrolysis products were analyzed at each thermal decomposition stage of non-isothermal pyrolysis. The isothermal pyrolysis of lignins was also carried out at 400, 500, and $600^{\circ}C$ to investigate the pyrolysis product distribution at each temperature. In non-isothermal pyrolysis, P lignin recovered from a fast pyrolysis process started to decompose and produced pyrolysis products at a lower temperature than H lignin recovered from a supercritical water hydrolysis process. In isothermal pyrolysis, guaiacyl and syringyl type were the major pyrolysis products at every temperature, while the amounts of p-hydroxyphenyl type and aromatic hydrocarbons increased with the pyrolysis temperature.

• 펄프종이기술
• /
• 제29권4호
• /
• pp.18-27
• /
• 1997

This study was performed to obtained the optimal delignified condition of exploded wood on the acid hydrolysis with sulfuric acid. Wood chips of pine wood(Pinus desiflora), oak wood(Quercus serrata) and birch wood (Betula platyphylla var. japonica) were treated with a high pressure steam (20-30kgf/$\textrm{cm}^2$, 2-6 minutes). The exploded wood was delignified with sodium hydroxide and sodium chlorite, and then hydrolyzed with sulfuric acid. The result can be summerized as follows ; In the exploded wood treated with sodium hydroxide, the optimal concentration of sodium hydroxide was 1% as content of lignin in the exploded wood. Lignin content of exploded wood treated with sodium chlorite was lower then that sodium hydroxide. The maximum reducing sugar yield of exploded wood treated with 1% sodium hydroxide was lower than non-treated exploded wood. In the case of sodium chlorite treated, the maximum reducing sugar yield was hgher than non-treated exploded wood. Sugar composition of acid hydrolysis solution was composed of xylose and glucose residue, and the rate of glucose residue was increased in high pressure condition.

• Journal of the Korean Wood Science and Technology
• /
• 제33권5호통권133호
• /
• pp.21-28
• /
• 2005

For the proper conservation of wooden cultural properties, non-destructive evaluation (NDE) method, which can be used to quantitatively evaluate the internal state of wood members, are needed. In this study, an ultrasonic CT system composed of portable devices was attempted, and the capacity of this system was verified by reconstructing the CT images for two phantoms and two artificially defected specimens. Results from this study showed that the sizes of detected defects were enlarged and the shapes were distorted on the CT images. Also, the positions were shifted somewhat toward the surface of specimen, which is regarded due to the anisotropic property of wood. Compared to the filtered back-projection method, SIRT (simultaneous iterative reconstruction technique) method was determined to be more efficient as the algorithm of image reconstruction for wood. A new ultrasonic CT system is thought to be used as a NDE method for wood. However wood characteristics and wave diffraction within wood made it difficult to accurately evaluate the size, shape and position of defects. To improve the quality of CT image of wood, more research including the relationship between wood and ultrasound is needed, and wood properties should be taken into consideration on the image reconstruction algorithm.

• Journal of the Korean Wood Science and Technology
• /
• 제43권5호
• /
• pp.661-671
• /
• 2015

To evaluate the shear performance of the textile glass fiber and the sheet glass fiber reinforced glulam bolted connections, a tension type shear test was conducted. The average yield shear strength of the bolted connection of reinforced glulam was increased by 12% ~ 31% compared to the non-reinforced glulam. It was confirmed that the shear performance of 5D end distance of the glass fiber reinforced glulam connection corresponds to that of 7D of the non-reinforced glulam connection proposed in building design requirements in various countries. Compared to the non-reinforced glulam, the average shear strength of textile glass fiber reinforced glulam was markedly increased. The non-reinforced glulam and the GFRP reinforced glulam underwent a momentary splitting fracture. However, the failure mode of textile glass fiber reinforced glulam showed a good ductility.

• 한국가구학회지
• /
• 제25권3호
• /
• pp.207-212
• /
• 2014

With increased interests in environmental issues, people are looking for new materials that serve special and bio-activated functions. One of interesting materials is charcoal which has excellent adsorption ability for harmful volatile organic compounds, fireproof performance, far-infrared ray emission, and electromagnetic shielding. Since non-crack carbonized board was developed from wood-based composite materials, carbonization method might be applied to woodcraft products such as wood cup and bamboo. In this study, manufacture of wood charcoal bowl was conducted with carbonization method developed in 2009 in order to activate wood products market. Ash tree(Fraxinus rhynchophylla) cup was carbonized at $600^{\circ}C$ with two pretreatments which were phenol resin and wood tar solution treatment. After carbonization of ash tree cup, non-crack charcoal cup were successfully manufactured. Phenol resin treatment affected on charcoal cup manufacturing both positively and negatively. For a positive way, it prevented shrinkage. For a negative way, it decreased water repellency. On the contrary, wood tar treatment accelerated shrinkage a bit and increased water repellency. Based on the results, wood tar can be used as pre-treatment solution for reducing post-treatment costs. We confirmed woodcraft products can be carbonized without deformation, so carbonization may provide a high value-added products from wood.