• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.31 no.6
• /
• pp.434-449
• /
• 2019

In this study, we develop a new cross-shore sediment module which takes the effect of infra-gravity waves of bound mode, and boundary layer streaming on the sediment transport into account besides the well-known asymmetry and under-tow. In doing so, the effect of individual random waves occurring during the unit observation period of 1 hr on sediment transport is also fully taken into account. To demonstrate how the individual random waves would affect the sediment transport, we numerically simulate the non-linear shoaling process of random wavers over the beach of uniform slope. Numerical results show that with the consistent frequency Boussinesq Eq. the application of which is lately extended to surf zone, we could simulate the saw-tooth profile observed without exception over the surf zone, infra-gravity waves of bound mode, and boundary-layer streaming accurately enough. It is also shown that when yearly highest random waves are modeled by the equivalent nonlinear uniform waves, the maximum cross-shore transport rate well exceeds the one where the randomness is fully taken into account as much as three times. Besides, in order to optimize the free parameter K involved in the long-shore sediment module, we carry out the numerical simulation to trace the yearly shoreline change of Mang-Bang beach from 2017.4.26 to 2018.4.20 as well, and proceeds to optimize the K by comparing the traced shoreline change with the measured one. Numerical results show that the optimized K for Mang-Bang beach would be 0.17. With K = 0.17, via yearly grand circulation process comprising severe erosion by consecutively occurring yearly highest waves at the end of October, and gradual recovery over the winter and spring by swell, the advance of shore-line at the northern and southern ends of Mang-Bang beach by 18 m, and the retreat of shore-line by 2.4 m at the middle of Mang-Bang beach can be successfully duplicated in the numerical simulation.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.16 no.2
• /
• pp.68-80
• /
• 2012

Purpose : More recently, combined PET/MR scanners have been developed in which the MR data can be used for both anatometabolic image formation and attenuation correction of the PET data. For quantitative PET information, correction of tissue photon attenuation is mandatory. The attenuation map is obtained from the CT scan in the PET/CT. In the case of PET/MR, the attenuation map can be calculated from the MR image. The purpose of this study was to assess the quantitative differences between MR-based and CT-based attenuation corrected PET images. Materials and Methods : Using the uniform cylinder phantom of distilled water which has 199.8 MBq of $^{18}F$-FDG put into the phantom, we studied the effect of MR-based and CT-based attenuation corrected PET images, of the PET-CT using time of flight (TOF) and non-TOF iterative reconstruction. The images were acquired from 60 minutes at 15-minute intervals. Region of interests were drawn over 70% from the center of the image, and the Scanners' analysis software tools calculated both maximum and mean SUV. These data were analyzed by one way-anova test and Bland-Altman analysis. MR images are segmented into three classes(not including bone), and each class is assigned to each region based on the expected average attenuation of each region. For clinical diagnostic purpose, PET/MR and PET/CT images were acquired in 23 patients (Ingenuity TF PET/MR, Gemini TF64). PET/CT scans were performed approximately 33.8 minutes after the beginnig of the PET/MR scans. Region of interests were drawn over 9 regions of interest(lung, liver, spleen, bone), and the Scanners' analysis software tools calculated both maximum and mean SUV. The SUVs from 9 regions of interest in MR-based PET images and in CT-based PET images were compared. These data were analyzed by paired t test and Bland-Altman analysis. Results : In phantom study, MR-based attenuation corrected PET images generally showed slightly lower -0.36~-0.15 SUVs than CT-based attenuation corrected PET images (p<0.05). In clinical study, MR-based attenuation corrected PET images generally showed slightly lower SUVs than CT-based attenuation corrected PET images (excepting left middle lung and transverse Lumbar) (p<0.05). And percent differences were -8.01.79% lower for the PET/MR images than for the PET/CT images. (excepting lung) Based on the Bland-Altman method, the agreement between the two methods was considered good. Conclusion : PET/MR confirms generally lower SUVs than PET/CT. But, there were no difference in the clinical interpretations made by the quantitative comparisons with both type of attenuation map.

• Archives of design research
• /
• v.2 no.1
• /
• pp.43-62
• /
• 1989

The luxury is the expression of human being's ornament instinct. In this study, in order to grasp the moulding system of the Korean's personal ornaments, the process of luxury prohibition was reviewed to search for to which direction the ornaments developed in the frame of the prohibited style connected closely to the character of the personal ornaments. The proiod was fixed from the old society to the late Chosun dynasty era. The beginning of the luxury in Korea seems to be the start of the luxury burial at the time of funeral in the age of Koguryo., In the era of Koguryo, 10th year of King Dongmyung (B. C. 28), in the era of Baekje, 27th year of King Koi(260), the prohibition of dress regulation and the style of dress were conducted. The prohibition of personal ornaments in Silla was started from King Bup:Heung, and in the 9th year of King Heung-Duk, the prohibition was conducted in order to correct the luxury of the nobles and set up the social discipline. In the 11 th of King Il-Sung-Ni-Sa-Kum, the use of gold, silver and jade was prohibited in the civilian circles. The prohibition of Silla was succeeded to Koryo era, and in the 7th year of King Kwangjong(956), the system of Baekgwan Gongbok(uniform for government officials) was set up, and the system of Sasek Gongbok(four color official uniform) was set up in the 11 th year of the same King, and the prohibition of the personal ornaments such as crown and band is considred to have been conducted. The prohibition of gold and silver was conducted in the first year of King Sungjong(982), and in the 4th year of King Chungryul(l260), the order of wearing the dress and hat in accordance with the Yusan dynasty and the Mongolian customs were widely circulated in the royal court and vivilian circles. The strong influence of Mongolia made the taste of the traditional personal ornaments laste. The personal ornaments were used for the nobles until the age of the Unified Sillar but even the common people could use them in case they were rich, and such a circumstances made the use of foreign goods inflated. The prohibition of Koryo era was aimed at the prohibition of the foreign goods of luxury, and the classification of the social status.In the age of Chosun Dynasty, the production of gold and silver was feeble indeed but the oute reason of the prohibition was to eradicate the luxurious tendency, elevate the custom of eradicate the luxurious tendency, elevate the custom of thrift, and moreover, the gold, silver and jade were no the products of Korea and the prohibition was conducted but the true reason was afor the tribute tt China and the classification of status. The prohibition of Chosun dynasty was conducted first in the June of the 3rd year of King Taejo The major contents of prohibition was no use of gold, silver and jade, coral, agate, amber, etc. of th, wives of the Dang-Sang-Kwan (Court Nobleman) or their sons and daughters, and the same pheno menon was common even at the time of marriage. The people engaged in the secret trade there of wert beheaded. The personal ornaments in the prohibition were the pendent trinket, Binyo (crossbar) ceremonial ornamental hat, ring, earring, ornamental knife, hat string, hat ornament, belt, etc. Thl luxurious marriage expenses out of the luxury was severe, and lose of the marriageable age because 0 non-preparing the marriage goods was the national evil. The prohibition oC luxury was hard to bt kept to the nobles or rich people, the same as old days and present days. The prohibition of th{ luxury and personal ornaments of Korea had nothing to do with the commons, and it was limited tc the nobles and rich people. The prohibition was aimed to cultivating the custom of frugality by eradicating the luxurious atmosphere, but it was chiefly due to the tribute to the China and tht discrimination of the. status. We can say that the recent personal ornament was the flower of handi craft industry bloomed in the prohibition and regulation.

• Nuclear Medicine and Molecular Imaging
• /
• v.42 no.1
• /
• pp.52-60
• /
• 2008

Purpose: To establish the methods for sinogram formation and correction in order to appropriately apply the filtered backprojection (FBP) reconstruction algorithm to the data acquired using PET scanner with multiple scintillation crystal layers. Materials and Methods: Formation for raw PET data storage and conversion methods from listmode data to histogram and sinogram were optimized. To solve the various problems occurred while the raw histogram was converted into sinogram, optimal sampling strategy and sampling efficiency correction method were investigated. Gap compensation methods that is unique in this system were also investigated. All the sinogram data were reconstructed using 20 filtered backprojection algorithm and compared to estimate the improvements by the correction algorithms. Results: Optimal radial sampling interval and number of angular samples in terms of the sampling theorem and sampling efficiency correction algorithm were pitch/2 and 120, respectively. By applying the sampling efficiency correction and gap compensation, artifacts and background noise on the reconstructed image could be reduced. Conclusion: Conversion method from the histogram to sinogram was investigated for the FBP reconstruction of data acquired using multiple scintillation crystal layers. This method will be useful for the fast 20 reconstruction of multiple crystal layer PET data.

• Journal of Animal Science and Technology
• /
• v.56 no.4
• /
• pp.13.1-13.5
• /
• 2014

The production performance of multiparous lactating Sahiwal cows (n = 24) was evaluated according to both milking frequency and method. Selected animals were randomly divided into four groups containing six animals each under a completely randomized design. Cows in groups A & B were milked by the hand milking method three times per day, respectively. Similarly, cows in groups C & D were milked by the machine milking method two and three times per day, respectively. All animals were maintained under uniform feeding and management conditions. Dry matter intake was high in animal groups milked three times per day, and it remained unchanged between the hand and machine milking methods. Milk yield was higher (P < 0.05) in cows milked three times compared to those milked twice per day, and it did not differ between hand and machine milking methods. Milk fat percentage was higher (P < 0.05) in cows milked twice per day compared to those milked three times using both machine and hand milking methods. The percentage of total solids showed a similar pattern as the fat percentage. However, percentages of protein, lactose, and non-fat solids in milk were not significantly different (P > 0.05) among the treatment groups. Collectively, the results show that milking three times per day instead of twice at 8-hour intervals can enhance milk yield in Sahiwal cows using both hand and machine milking methods.

• Korean Journal of Soil Science and Fertilizer
• /
• v.46 no.6
• /
• pp.409-416
• /
• 2013

Millet and sorghum are major dryland cereal crops, however their growth and productivity is limited by soil water stress with varying intensity. The major objective of this study was to evaluate water stress of millet and sorghum yield under drainage classes of poorly drained soil and to test the effect of the installed pipe drainage in poorly drained paddy soil to minimize crop stress. The research was carried out in poorly drained paddy fields located at alluvial slopping area resulting in non-uniform water content distribution by the inflow of ground water from the upper part of the field. Stress Day Index (SDI) was determined from a stress day factor (SD) and a crop susceptibility factor (CS). SD is a degree of measurement by calculating the daily sum of excess water in the profile above 30cm soil depth ($SEW_{30}$). CS depends on a given excess water on crop stage. The results showed that sum of excess water day ($SWD_{30}$) used to represent the moisture stress index was lower on somewhat poorly drained soil compared with poorly drained soil on 117 days. CS values for sorghum were 57% on $3^{rd}$ leaf stage, 44% on $5^{th}$ leaf stage, 37% on panicle initiation, 23% on boot stage, and 16% on soft dough stage. For proso millet CS values were 84% on $3^{rd}$ leaf stage, 70% on $5^{th}$ leaf Stage, 65% on panicle initiation, 53% on boot stage, and 28% on soft dough stage. And for foxtail millet the values were 73% on $3^{rd}$ leaf stage, 61% on $5^{th}$ leaf stage, 50% on panicle initiation, 29% on boot stage, and 15% on soft dough stage. SDI of sorghum and millet was more susceptible to excess soil water during panicle initation stage more poorly drained soil than somewhat poorly drained soil. Grain yield was reduced especially in proso millet and Foxtail millet compared to Sorghum.

• Journal of Korean Society of Steel Construction
• /
• v.22 no.5
• /
• pp.399-409
• /
• 2010

Steel structures are threatened to reduce load-carrying capacity as the cross section is decreased by corrosion. However, there has been no method in definitely evaluating residual load-carrying capacity and the effect of corrosion to the load-carrying capacity of steel. This study evaluated tensile residual load-carrying capacity of corroded steel plates by using tensile tests of specimens, which were selected from the web of temporary structure's main beam. After the surface shapes were measured and tensile tests were examined, the rust of 21 corroded specimens was, first of all, removed using a chemical method. From the tensile test result, which of reference specimens that was picked off at the flange of the same main 13-mm-thick beam and corroded specimens were based, surface geometry and correlation with the reduction of corroded thickness and strain, yield strength or tensile strength was established as constant numbers. Effective thickness of corroded steel with irregular cross sections could be calculated using average residual thickness and standard deviation. The irregular cross sections could be the evaluated tensile strength that is equalized to non-corroded uniform steel's regardless of corrosion. Also, reasonable measuring intervals of residual thickness could be proposed by using this result to apply for executive work.

• Journal of Arbitration Studies
• /
• v.20 no.3
• /
• pp.25-46
• /
• 2010

In spite of great interest and recent innovation of the legislative system in the Arbitration and other Alternative Dispute Resolution(ADR) system, In Japan there have been only a few case in which International commercial dispute was settled through the Arbitration compared to other countries. However, we can easily expect that foreign arbitral awards which need to be recognized and enforced in Japan will gradually increase and this makes it very important for us to review the Japanese legislative system regarding recognition and enforcement of foreign arbitral awards. In this paper, I focused on the relations between applicable laws(including convention) regarding recognition and enforcement of foreign arbitral awards in Japan and some issues concerning refusal of recognition and enforcement of foreign arbitral awards. Japan is a member state of several multilateral conventions concerning recognition and enforcement of foreign arbitral awards including the New York Convention of 1958 and at least 20 bilateral agreements which include provisions in relate to the recognition and enforcement of arbitral awards. Therefore there are some legal issues about the priority application between multilateral and bilateral agreements in relate to Article 7(1) of the New York Convention. In Japan, as I mentioned in this paper, there are incoherent opinions concerning this issue. To solve it substantially it would seem appropriate to build up concrete and explicit provisions concerning the application of priority between multilateral and bilateral agreements. On the other hand, in relate to the application between the New York Convention and National Law, it is necessary to take general approach regarding the priority application between Convention (Treaty) and National Law, considering the national application of conventions under the Constitutional System of each country. Among the grounds for non-recognition/enforcement, there are the ones that are decided under the law of the requested country, for instance, arbitrability and public policy. It would therefore be possible that some foreign arbitral awards would not be recognized in Japan especially relating to the arbitrability because its scope in Japan is not so large. Regarding the enforcement of awards annulled in their place of origin, some positive opinions in recent Japanese legal discussions, say that annulled awards should be enforced as a counter strategy of developed countries and judiciary discretion of the requested country would be needed. As mentioned in this paper, the recognition and enforcement of foreign arbitral awards is closely related to judicial policy of the requested country as the recognition and enforcement of foreign judgment is. Even though there existed uniform rules on recognition and enforcement of foreign arbitral awards like the New York convention, each country has different internal legal status of conventions under its own Constitutional System and tends to interpret the provisions based in its own profit. Therefore, it is necessary to review, in the light of conflict of laws, the national legislative system including legal status of conventions of the requested countries concerning recognition and enforcement of foreign arbitral awards.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.2 no.2
• /
• pp.64-73
• /
• 1998

In twin spool aero-engine, there may be a S shaped annular duct between high pressure and low pressure spools. The flow passing this S shaped duct experiences the flow acceleration and deceleration due to the convex and concave surface of the duct as well as the increase of blockage according to the boundary layer growth along the surfaces. So, the high pressure compressor which is located behind the S shaped duct is influenced by the non-uniform flow field generated by the geometry of inlet duct. To study the influence of the S shaped duct on the centrifugal stage, performance tests were implemented for the compressor with straight cylindrical inlet duct and with S shaped inlet duct, respectively. The test results showed that the performance, such as pressure ratio and efficiency, of the compressor with S shaped duct was worse than that of the compressor with cylindrical duct. And the compressor with S shaped duct had reduced maximum flow rate around design speed. To investigate the cause of performance degradation, flow anlaysis was performed for the impeller in front of which is located S shaped annular duct. The result of CFD showed the strong acceleration of the flow in the axial direction around the inducer tip region which caused the increase of relative mach number and the decrease of incidence angle of the flow.

• Geomechanics and Engineering
• /
• v.23 no.2
• /
• pp.151-163
• /
• 2020

Grouting method is an effective way of reinforcing cracked rock masses and plugging water gushing. Current grouting diffusion models are generally developed for horizontal cracks, which is contradictory to the fact that the crack generally occurs in rock masses with irregular spatial distribution characteristics in real underground environments. To solve this problem, this study selected a cement-sodium silicate slurry (C-S slurry) generally used in engineering as a fast-curing grouting material and regarded the C-S slurry as a Bingham fluid with time-varying viscosity for analysis. Based on the theory of fluid mechanics, and by simultaneously considering the deadweight of slurry and characteristics of non-uniform spatial distribution of viscosity of fast-curing grouts, a theoretical model of slurry diffusion in an oblique crack in rock masses at constant grouting rate was established. Moreover, the viscosity and pressure distribution equations in the slurry diffusion zone were deduced, thus quantifying the relationship between grouting pressure, grouting time, and slurry diffusion distance. On this basis, by using a 3-d finite element program in multi-field coupled software Comsol, the numerical simulation results were compared with theoretical calculation values, further verifying the effectiveness of the theoretical model. In addition, through the analysis of two engineering case studies, the theoretical calculations and measured slurry diffusion radius were compared, to evaluate the application effects of the model in engineering practice. Finally, by using the established theoretical model, the influence of cracking in rock masses on the diffusion characteristics of slurry was analysed. The results demonstrate that the inclination angle of the crack in rock masses and azimuth angle of slurry diffusion affect slurry diffusion characteristics. More attention should be paid to the actual grouting process. The results can provide references for determining grouting parameters of fast-curing grouts in engineering practice.