• Journal of Korean Tunnelling and Underground Space Association
• /
• v.14 no.4
• /
• pp.321-336
• /
• 2012

The shear behavior at the particle/surface interface such as rock joint can determine the mechanical behavior of whole structure. Therefore, a fundamental understanding of the mechanisms governing its behavior and accurately estimation of the interface strength is essential. In this paper, PFC, a numerical analysis program of discrete element method was used to investigate the effects of the surface roughness crushing on interface strength. The surface roughness was characterized by smooth, intermediate, and rough surface, respectively. Particle shape was classified into one ball model of circular shape and 3 ball model of triangular shape. The surface shape was modelled by wall model of non-crushing surface and ball model of crushing surface. The results showed that as the bonding strength of ball model decreases, lower interface strength is induced. After the surface roughness crushing was occurred, the interface strength tended to converge and higher bonding strength induced lower surface roughness crushing. Higher friction angle was induced in wall model and higher surface roughness induced the higher friction angle. From these findings, it is verified that the surface roughness and surface roughness crushing effect on the particle/surface interface shear behavior.

• The Journal of the Korea Contents Association
• /
• v.18 no.4
• /
• pp.99-113
• /
• 2018

Recently, global warming has widened the habitat of mosquitoes and infection chances for mosquito-borne diseases are increasing. Flavivirus is a typical mosquito-borne virus. Flaviviruses with a relatively high frequency of infection in Asian countries include Zika, Dengue, and Japanese encephalitis viruses. Although distinctive diagnosis of flaviviruses is required because the symptoms and therapeutic method differ, there is no diagnostic method that can distinguish them accurately yet. In this study, we propose distinctive diagnosis method of flaviviruses using informations and analysis tools constructed in bioinformatic databases. The envelope protein and non-structural protein 1 which are useful protein for the immuno-diagnostics of three flaviviruses were selected. Their homology was analyzed by multiple sequence alignments and epitope candidates consisting of 10-15 amino acids were selected. Finally two epitopes were suggested to be most useful by immunogenicity analysis and 3D structure prediction. These approaches and results are expected to be great value in the distinctive diagnosis of three flaviviruses with a high frequency of infection in Asian countries.

• Reproductive and Developmental Biology
• /
• v.30 no.2
• /
• pp.87-92
• /
• 2006

The possibility of producing transgenic embryos expressing the green fluorescence protein (GFP) gene have been evaluated after transfer of exogenous gene into the porcine zygote cytoplasm using the intracytoplasm sperm injection (ICSI) as gene delivery method. For DNA binding to sperm heads, 0.05% Triton X-100 or Lipofectin was used. After injection of the sperm bound to DNA by means of Lipofectin or Triton X-100 triturate, the blastocyst formation rates on day 6 were not significantly different from that of ICSI only group (18.8, 19.2 and 25.3%). In terms of GFP expression, more embryos were in GFP form in Triton X-100 group than in Lipofectin group (40.6 vs 36.4%), while percentage of non-mosaic embryos expressing the GFP gene in all blastomere was higher (P<0.05) in Lipofectin group than in Triton X-100 group (4.2 vs 0.9%). ICSI embryos derived from sperm treated with Lipofectin/DNA complex was transferred into 3 recipients and were collected by uterine flushing on days 5, 7 and 15 after embryo transfer, and then GFP expression was observed by a fluorescence microscopy. Over 26% of the collected embryos were normally expressed GFP gene. These results suggest that foreign gene transfer method with DNA bound sperm caused minimal damage to structure of oocytes that can result to full development of porcine embryos. This was confirmed in this study when the embryos that were transferred after ISCI of DNA bound sperm had a normal development and gene expression until preimplantation.

• Analytical Science and Technology
• /
• v.26 no.1
• /
• pp.19-26
• /
• 2013

Gibberllic acid ($GA_3$) is one of gibberellins (GAs) that are a class of plant growth hormones that exert profound and diverse effects on plant growth and development. $GA_3$ is essentially non-UV absorbing and is difficult to assay by UV-detector. For effective extraction of gibberellic acid from fruits by using liquid-liquid extraction, optimized pH and extraction solvent were established. The selective and sensitive derivative of $GA_3$ for HPLC/UV-vis was derivatized using phenacyl bromide, and the experimental factors, including reaction time, reaction temperature and amount of derivatizing reagent and base were investigated for the effective synthesis. The derivatized $GA_3$ with phenacyl bromide was effectively analyzed by HPLC/UV-vis. The structure of derivatized $GA_3$ was confirmed by HPLC/ESI-MS. For apple, LOD and LOQ were 0.008 mg/kg and 0.027 mg/kg, respectively. For pear, LOD and LOQ were 0.003 mg/kg, 0.012 mg/kg, respectively. The established method can be applied to more effective analysis of $GA_3$ from plant and food.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.6
• /
• pp.23-29
• /
• 2003

Transonic two-phase flow of Saturated humid air, in which relative humidity is 100%, with various condensation processes around thin airfoils is investigated. The study uses an extended transonic small-disturbance(TSD) model of Rusak and Lee [11, 12] which includes effects of heat addition to the flow due to condensation. Two possible limit types of condensation processes are considered. In the nonequilibrium and homogeneous process, the condensate mass fraction is calculated according to classical nucleation and droplet growth rate models. In the equilibrium process, the condensate mass fraction is calculated by assuming an isentropic process. The flow and condensation equations are solved numerical1y by iterative computations. Results under same upstream conditions describe the flow structure, field of condensate, and pressure distribution on airfoil's surfaces. It is found that flow characteristics, such as position and strength of shock waves and airfoil’s pressure distribution, are different for the two condensation processes. Yet, in each case, heat addition as a result of condensation causes significant changes in flow behavior and affects the aerodynamic performance of airfoils.

• Journal of Yeungnam Medical Science
• /
• v.20 no.2
• /
• pp.160-168
• /
• 2003

Background: Confirm the stability of intervertebral disc sustaining each fused lumbar spine cases, comparing vertical compression, A-P shear force and rotational moment on intervertebral disc of instrumented lumbar spine with simple vertical compression load and follower load using finite element analysis. Materials and Methods: We analyze the stability of intervertebral disc L4-5 supporting fused lumbar spine segments. After performing finite element modelling about L1-L5 lumbar vertebral column and L1-L4 each fusion level pedicle screw system for fused lumbar spine fine element model. Intervertebral discs with complex structure and mechanical properties was modeled using spring element that compensate stiffness and tube-to-tube contact element was employed to give follower load. Performing geometrical non-linear analysis. Results: The differences of intervertebral disc L4-5 behavior under the follower compression load in comparision with vertical compression load are as follows. Conclusion: As a result of finite element interpretation of instrumented lumbar spine, the stability of L4-5 sustaining fused lumbar segment, the long level fused lumbar spine observed hing stability under follower load. This research method can be the basis tool of effects prediction for instrumentation, a invention of a more precious finite element interpretation model which consider the role of muscle around the spine is loaded.

• Asian-Australasian Journal of Animal Sciences
• /
• v.22 no.8
• /
• pp.1078-1084
• /
• 2009

The Jindo dog is a Korean natural monument and is recognized by the Fédération Cynologique Internationale. A prominent feature is the diverse coat color within the breed. To analyze the genetic basis of variation in the Jindo coat color, we sequenced the protein-coding regions of the melanocortin 1 receptor gene (MC1R). The MC1R coding sequence was determined from 154 dogs in five breeds (Jindo, Labrador Retriever, English Springer Spaniel, Belgian Malinois, and German Shepherd). To confirm the genetic structure of sampled populations, we tested for Hardy-Weinberg equilibrium (HWE) and computed $F_{st}$ The sample populations did not significantly deviate from HWE. $F_{st}$ was 0.02 between white and fawn Jindo dogs; this was lower than $F_{st}$ between breeds. Six single nucleotide polymorphisms (SNPs) were detected in the MC1R coding region. Among the six SNPs, five were non-synonymous (S90G, T105A, Q159P, M264V, and R306ter) and one was synonymous SNP (Y298Y). From the SNPs, we predicted four haplotypes (H1, H2, H3, and H4) for Jindo MC1R. Jindo dogs had different haplotypes corresponding to different coat colors. H1 was frequently observed in white Jindo dogs with an odds ratio of 5.03 (95% CI: 2.27-11.18, p<0.0001), whereas H2 and H4 were observed only in fawn Jindo dogs. Our findings indicate that SNP haplotype can influence coat color. Knowledge of MC1R haplotypes can help discriminate white and fawn coats in Jindo dogs. We hope this report will trigger more research into the genetics of this traditional Korean dog and will be a reference for dogs of Asian origin. Also, our results will provide a useful genetic marker for Jindo dog breeders who have selected for specific colors.

• Asian Journal for Public Opinion Research
• /
• v.8 no.3
• /
• pp.393-406
• /
• 2020

The discourse on the lockdown in Indonesia is getting stronger due to the increasing number of positive cases of the coronavirus and the death rate. As of August 12, 2020, the confirmed number of COVID-19 cases in Indonesia reached 130,718. There were 85,798 victims who have recovered and 5,903 who have died. Data show a significant increase in cases of COVID-19 every day. For this reason, there needs to be an evaluation of the government policy of the Republic of Indonesia in dealing with the COVID-19 pandemic in Indonesia. An evaluation of policies for handling the pandemic must include public opinion to determine any weaknesses of this policy. The development of public opinion about the lockdown policy can be understood through social media. During the COVID-19 pandemic, measuring public opinion through traditional methods (surveys) was difficult. For this reason, we utilized big data on social media as research data. The main purpose of this study is to understand public opinion on the lockdown policy in overcoming the COVID-19 pandemic in Indonesia. The things observed included: volume of Twitter users, top influencers, top tweets, and communication networks between Twitter users. For the methodological development of future public opinion research, the researchers outline the obstacles faced in researching public opinion based on big data from Twitter. The research results show that the lockdown policy is an interesting issue, as evidenced by the number of active users (79,502) forming 133,209 networks. Posts about the lockdown on Twitter continued to increase after the implementation of the lockdown policy on April 10, 2020. The lockdown policy has caused various reactions, seen from the word analysis showing 14.8% positive sentiment, 17.5% negative, and 67.67% non-categorized words. Sources of information who have played the roles of top influencers regarding the lockdown policy include: Jokowi (the president of the Republic of Indonesia), online media, television media, government departments, and governors. Based on the analysis of the network structure, it shows that Jokowi has a central role in controlling the lockdown policy. Several challenges were found in this study: 1) choosing keywords for downloading data, 2) categorizing words containing public opinion sentiment, and 3) determining the sample size.

• Journal of Powder Materials
• /
• v.9 no.6
• /
• pp.394-408
• /
• 2002

Nanostructured high strength metastable Al-, Mg- and Ti-based alloys containing different amorphous, quasicrystalline and nanocrystalline phases are synthesized by non-equilibrium processing techniques. Such alloys can be prepared by quenching from the melt or by powder metallurgy techniques. This paper focuses on one hand on mechanically alloyed and ball milled powders containing different volume fractions of amorphous or nano-(quasi)crystalline phases, consolidated bulk specimens and, on the other hand. on cast specimens containing different constituent phases with different length-scale. As one example. $Mg_{55}Y_{15}Cu_{30}$- based metallic glass matrix composites are produced by mechanical alloying of elemental powder mixtures containing up to 30 vol.% $Y_2O_3$ particles. The comparison with the particle-free metallic glass reveals that the nanosized second phase oxide particles do not significantly affect the glass-forming ability upon mechanical alloying despite some limited particle dissolution. A supercooled liquid region with an extension of about 50 K can be maintained in the presence of the oxides. The distinct viscosity decrease in the supercooled liquid regime allows to consolidate the powders into bulk samples by uniaxial hot pressing. The $Y_2O_3$ additions increase the mechanical strength of the composites compared to the $Mg_{55}Y_{15}Cu_{30}$ metallic glass. The second example deals with Al-Mn-Ce and Al-Cu-Fe composites with quasicrystalline particles as reinforcements, which are prepared by quenching from the melt and by powder metallurgy. $Al_{98-x}Mn_xCe_2$ (x =5,6,7) melt-spun ribbons containing a major quasicrystalline phase coexisting with an Al-matrix on a nanometer scale are pulverized by ball milling. The powders are consolidated by hot extrusion. Grain growth during consolidation causes the formation of a micrometer-scale microstructure. Mechanical alloying of $Al_{63}Cu_{25}Fe_{12}$ leads to single-phase quasicrystalline powders. which are blended with different volume fractions of pure Al-powder and hot extruded forming $Al_{100-x}$$(Al_{0.63}Cu_{0.25}Fe_{0.12})_x$ (x = 40,50,60,80) micrometer-scale composites. Compression test data reveal a high yield strength of ${\sigma}_y{\geq}$700 MPa and a ductility of ${\varepsilon}_{pl}{\geq}$5% for than the Al-Mn-Ce bulk samples. The strength level of the Al-Cu-Fe alloys is ${\sigma}_y{\leq}$550 MPa significantly lower. By the addition of different amounts of aluminum, the mechanical properties can be tuned to a wide range. Finally, a bulk metallic glass-forming Ti-Cu-Ni-Sn alloy with in situ formed composite microstructure prepared by both centrifugal and injection casting presents more than 6% plastic strain under compressive stress at room temperature. The in situ formed composite contains dendritic hcp Ti solid solution precipitates and a few $Ti_3Sn,\;{\beta}$-(Cu, Sn) grains dispersed in a glassy matrix. The composite micro- structure can avoid the development of the highly localized shear bands typical for the room temperature defor-mation of monolithic glasses. Instead, widely developed shear bands with evident protuberance are observed. resulting in significant yielding and homogeneous plastic deformation over the entire sample.

• The Korean Journal of Pesticide Science
• /
• v.21 no.1
• /
• pp.1-8
• /
• 2017

Although a global ban on the use of endosulfan, an organochloline insecticide, has taken effect in mid-2012, it has been still used in several countries, including India and China, and detected in diverse environments in the world due to its relative persistence and semi-volatility. In this study, the effect of endosulfan on soil bacterial community was investigated using 16S rRNA gene pyrosequencing method. When endosulfan was applied to an upland soil at a rate of 100 mg/kg soil (ES soil), the number of operational taxonomic units (OTU) and diversity indices for bacteria initially decreased and gradually recovered to the level of the non-treated soil (NT soil) during an eight-week incubation period. At bacterial phylum level, relative abundances of Proteobacteria and Verrucomicrobia were higher while those of Chloroflexi and Spirochaetes were lower in the ES soil than in the NT soil, suggesting that an endosulfan application affects the bacterial community structure in soil. In the ES soil, the relative abundances of the OTUs affiliated to the genera Sphingomonas and Burkholderia increased in the initial period of incubation while those affiliated to the genera Pseudonocardia and Opitutus increased in the late period of incubation. Because the first three genera contain bacterial strains reported to degrade endosulfan, they are expected to be involved in the degradation of endosulfan, probably one after another.