• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2003년도 봄 학술발표회 논문집
• /
• pp.249-256
• /
• 2003

To investigate the safety and stability of the concrete lining, numerous studies have been conducted over the years and several methods have been developed. Most signal processing method of NDT techniques has based on the Fourier analysis. However, the application of Fourier analysis to analyze recorded signal shows results only in frequency domain, it is not enough to analyze transient waves precisely. In this study, a new NDT technique .using the wavelet theory was employed for the analysis of non-stationary wave propagation induced by mechanical impact in the concrete lining. The wavelet transform of transient signals provides a method for mapping the frequency spectrum as a function of time. To verify the availability of wavelet transform as a time- frequency analysis tool, model experiments have been conducted on the concrete lining model. From this study, it was found that the contour map by Wavelet transform provides more distinct results than the power spectrum by Fourier transform and it was concluded that Wavelet transform was an effective tool for the experimental analysis of dispersive waves in concrete structures.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.827-832
• /
• 2003

There has been a number methods for the presentation of time-frequency analysis of non-stationary signal. In this paper, STFT(short time Fourier transform), wavelet transform, Wigner distribution, and higher order Wigner distribution are discussed in details with simulation signals. They are also applied to the analysis of the wave propagation of a semi finite beam. Wigner distribution and higher order Wigner distribution have good time-frewuency resolutions. Wavelet transform is required for impact analysis but should be applied carefully. STFT suffers from time-frequency resolutions. Each method is has its advantage and disadvantage depending on each application signals.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.895-902
• /
• 2007

Rotating machinery has two typical faults with clearance, one is partial rub and the other is looseness. Due to these faults, non-linear and non-stationary signals are occurred. Therefore, time-frequency analysis is necessary for exact fault diagnosis of rotating machinery. In this paper newly developed time-frequency analysis method, HHT(Hilbert-Huang Transform) is applied to fault diagnosis and compared with other method of FFT, SFFT and CWT. The results show that HHT can represent better resolution than any other method. Consequently, the faults of rotating machinery are diagnosed efficiently by using HHT.

• 토지주택연구
• /
• 제1권1호
• /
• pp.51-57
• /
• 2010

국내에서 내진설계의 중요성이 점차적으로 부각되고 있으며 이에 따라 설계 시 동적 지진해석의 수행빈도가 높아지고 있다. 동적 지진해석을 수행하기 위한 가장 중요한 입력변수 중 한가지는 입력지진파이다. 그러나 현재 국내에서는 지진학적 검토 없이 미국, 일본 등에서 계측된 강진 기록을 입력지진파로 사용하거나 주파수영역에서 생성된 인공지진파를 사용하고 있다. 국외 계측 지진기록은 지진 규모에 따라 변화하는 지속시간과 에너지를 고려할 수 없어서 국내 지진환경에는 적합하지 않으며, 주파수 영역에서 생성되는 설계응답스펙트럼에 맞춤형 인공지진파는 실제 지진기록과 주파수 특성이 상이한 문제가 있다. 본 연구에서는 이와 같은 입력지진파의 문제점을 극복하기 위하여 시간영역에서 수행되는 응답스펙트럼 맞춤형 인공지진파 알고리즘을 적용하여 입력 지진파를 생성하였다. 생성된 지진파는 계측 지진기록의 고유한 성질인 Non-stationary 특성을 보존하며 동시에 설계 응답스펙트럼과 거의 완벽한 일치성을 보이는 것으로 나타났다.

• 대한기계학회논문집A
• /
• 제33권12호
• /
• pp.1442-1448
• /
• 2009

Transient characteristics of a signal can be effectively exhibited in time-frequency domain. Hilbert-Huang Transform (HHT) is one of the time-frequency domain analysis methods. HHT is known for its several advantages over other signal analysis methods. The capability of analyzing non-stationary or nonlinear characteristics of a signal is the primary advantage of HHT. Moreover, it is known that HHT can provide fine resolution in high frequency region and handle large size data efficiently. In this study, the effectiveness of Hilbert-Huang transform is illustrated by employing structural systems undergoing impact. A simple discrete system and an axially oscillating cantilever beam undertaking periodic impulsive force are chosen to show the effectiveness of HHT.

• Wind and Structures
• /
• 제20권5호
• /
• pp.661-682
• /
• 2015

This study investigates the use of time-frequency coherence analysis for detecting and evaluating coherent "structures" of surface pressures and wind turbulence components, simultaneously on the time-frequency plane. The continuous wavelet transform-based coherence is employed in this time-frequency examination since it enables multi-resolution analysis of non-stationary signals. The wavelet coherence quantity is used to identify highly coherent "events" and the "coherent structure" of both wind turbulence components and surface pressures on rectangular prisms, which are measured experimentally. The study also examines, by proposing a "modified" complex Morlet wavelet function, the influence of the time-frequency resolution and wavelet parameters (i.e., central frequency and bandwidth) on the wavelet coherence of the surface pressures. It is found that the time-frequency resolution may significantly affect the accuracy of the time-frequency coherence; the selection of the central frequency in the modified complex Morlet wavelet is the key parameter for the time-frequency resolution analysis. Furthermore, the concepts of time-averaged wavelet coherence and wavelet coherence ridge are used to better investigate the time-frequency coherence, the coherently dominant events and the time-varying coherence distribution. Experimental data derived from physical measurements of turbulent flow and surface pressures on rectangular prisms with slenderness ratios B/D=1:1 and B/D=5:1, are analyzed.

• 한국수자원학회논문집
• /
• 제52권10호
• /
• pp.671-680
• /
• 2019

기후변화에 따른 수문순환 요소들의 변화로 인해 미래에는 전 세계적으로 수문사상의 규모 및 빈도가 증가할 것이라는 많은 선행연구들이 있다. 하지만 북한지역의 미래 강수량에 대한 정량적 연구와 평가는 미비한 실정이다. 북한지역 역시 우리나라와 마찬가지로 극한강수에 따른 피해가 발생될 것으로 예상되기 때문에 북한지역에 관한 연구는 지속적으로 진행되어야 한다. 따라서 본 연구에서는 정상성 및 비정상성 빈도해석을 통해 북한지역의 미래(2020-2060년) 극한강수를 산정하고 현재기후(1981-2017년)와 비교 분석하였다. 비정상성 빈도해석은 RCP기후변화시나리오에 따라 모의된 HadGEM2-AO모델의 외부인자(JFM(1-3월), AMJ(4-6월), JAS(7-9월), OND(10-12월)의 평균 강수량)를 고려하여 수행하였다. 북한지역 극치 강우 사상과 유사한 경향을 보이는 외부인자 선정을 위해 앙상블 경험적 모드분해법을 활용하여 연 최대 강우자료의 잔차를 추출하였다. 추출된 잔차와 외부인자 사이의 상관성분석을 실시하였다. 8개 지점(강계, 삼지연, 장진, 양덕, 함흥, 신포, 장전, 신계)에서 3개의 외부인자(AMJ, JAS, OND)가 경향이 있음을 확인하였다. 선정된 외부인자를 고려하여 비정상성 GEV모형을 구축하고 빈도해석을 수행하였다. 그 결과, RCP4.5에서는 8개 지점 중 4개 지점이 현재기후 대비 미래극한강수량이 감소하는 경향을 보였고 3개 지점이 증가하는 것으로 나타났다. 반면에 RCP8.5에서는 2개 지점이 감소하는 경향을 5개 지점이 증가하는 것으로 분석되었다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 춘계학술대회논문집
• /
• pp.766-771
• /
• 2008

In this paper, the vibration of high speed trains and the irregularity of railway are examined using a wavelet-based frequency response function. To investigate their characteristics, non-stationary acceleration data are acquired and processed using the wavelet transform. Also, the railway irregularity is examined by acquiring the data from the on-board laser-based measurement system. The correlation between the train vibration and the railway irregularity has been investigated. From the analysis, the wavelet-based frequency response function is a promised method for the dynamic characteristics of high speed trains.

• 전기학회논문지
• /
• 제63권8호
• /
• pp.1128-1133
• /
• 2014

Most of the statistical signal analysis processed in the time domain and the frequency domain are based on the assumption that the signal is weakly stationary(wide sense stationary). Therefore, it is necessary to know whether the surface EMG signals processed in the statistical basis satisfy the condition of the weak stationarity. The purpose of this study is to find optimal segment length of surface EMG signal for assessing stationarity with the modified Run-test and RA-test. Ten stationary surface EMG signals were simulated by AR(autoregressive) modeling, and ten real surface EMG signals were recorded from biceps brachii muscle and then modified to have non-stationary structures. In condition of varying segment length from 20ms to 100ms, stationarity of the signals was tested by using six different methods of modified Run-test and RA-test. The results indicate that the optimal segment length for the surface EMG is 30ms~35ms, and the best way for assessing surface EMG signal stationarity is the modified Run-test (Run2) method using this optimal length.

• 비파괴검사학회지
• /
• 제19권4호
• /
• pp.270-276
• /
• 1999

지금까지 퓨리에 변환이 신호처리법으로 가장 널리 사용되고 있다. 그러나, 이 방법은 신호의 주파수성분이 시간에 대하여 어떻게 변화하는지를 표현하지 못한다. 따라서, 최근 이와 같이 비정상신호를 표현하지 못하는 퓨리에 변환의 단점을 보완하여, 신호의 시간과 주파수에 대한 정보를 동시에 표현할 수 있는 시간-주파수 해석법들이 개발되기 시작하였다. 본 연구에서는 인공열화된 SUS 316강의 초음파신호를 시간-주파수 해석법으로 분석하였다. 특히, 단시간 퓨리에 변화법과 위그너 빌 분포법을 이용하여 초음파 신호의 주파수 성분과 특성을 분석하였다.