• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2012년도 춘계학술발표대회 논문집
• /
• pp.406-409
• /
• 2012

Recently, enormous research efforts have been focused on the development of non-precious catalysts to replace Pt for electrocatalytic oxygen reduction reaction (ORR), and to reduce the cost of proton exchange membrane fuel cells (PEMFCs). In recent years, heteroatom (N, B, and P) doped carbon nanostructures have been received enormous importance as a non-precious electrode materials for oxygen reduction. Doping of foreign atom into carbon is able to modify electronic properties of carbon materials. In this study, nitrogen and boron doped carbon nanostructures were synthesized by using a facile and cost-effective thermal annealing route and prepared nanostructures were used as a non-precious electrocatalysts for the ORR in alkaline electrolyte. The nitrogen doped carbon nanocapsules (NCNCs) exhibited higher activity than that of a commercial Pt/C catalyst, excellent stability and resistance to methanol oxidation. The boron-doped carbon nanostructure (BC) prepared at $900^{\circ}C$ showed higher ORR activity than BCs prepared lower temperature (800, $700^{\circ}C$). The heteroatom doped carbon nanomaterials could be promising candidates as a metal-free catalysts for ORR in the PEMFCs.

• 전기화학회지
• /
• 제23권4호
• /
• pp.90-96
• /
• 2020

수소의 화학반응 에너지를 직접 전기 에너지로 변환하는 Polymer electolyte membrane fuel cells (PEMFCs)는 친환경 미래 운송수단 에너지원의 한 종류이다. PEMFCs의 내부에 산소 환원 반응이 매우 느리고 고가의 백금을 사용하기 때문에 이를 대체하려는 연구가 국내외에서 매우 활발히 연구되고 있다. 하지만 백금이외에 값싼 재료를 이용한 촉매의 경우 여전히 성능이 매우 상이하며 활성 향상에 대한 지표 등이 다양하다. 이에 본 총설은 non-precious metal catalyst (NPMC)의 활성 지표 등을 정리하고 최근 5년간의 자료를 요약하였다. 이를 통해 촉매재료의 선별, 합성시 주안점, 조촉매 등을 설명하며, 촉매 활성에 대한 연구의 필요성을 상기 시킬 수 있다. 이를 통해 귀금속 촉매가 널리 사용되는 분야에 적용할 수 있는 NPMC의 연구 및 개발에 기여할 수 있을 것으로 보인다. 또한 향후 연구개발의 최종적인 목표를 기술한다.

• 대한치과보철학회지
• /
• 제41권1호
• /
• pp.1-19
• /
• 2003

The surface of metals should be as smooth as possible for optimum comfort, oral hygiene, low plaque retention, and resistance to corrosion. In this study five specimens of each precious metal(type III gold alloy, ceramic gold alloy, and Ag-Pd alloy) were divided into five groups according to finishing and polishing procedures : group 1(sandblaster), group 2(group 1+stone), group 3(group 2+brown rubber), group 4(group 3+green rubber), and group 5(group 4+rouge). Six specimens of each non-precious metal(Co-Cr alloy, Ni-Cr alloy, and Co-Cr-Ti alloy) were divided into six groups: group 1(sandblaster), group 2(group 1+hard stone), group 3(group 2+electrolytic polisher), group 4(group 3+brown hard rubber point), group 5(group 4+green hard rubber point), and group 6(group 5+rouge). Considering factors affecting the rate of abrasion, the same dentist applied each finishing and polishing procedure. In addition, the surface roughness of enamel, resin, and porcelain was evaluated. The effect of finishing and polishing procedures on surface roughness of precious and non-precious metals, enamel, resin, and porcelain was evaluated by means of Atomic Force Microscope(AutoProbe CP. Park Scientific Instruments, U.S.A.) that can image the three dimensional surface profile and measure average surface roughness values of each sample at the same time. The obtained results were as follows : 1. According to finishing and polishing procedures, the surface roughness of type III gold alloy, ceramic gold alloy, and Ag-Pd alloy was decreased in the order of group 1, 2, 3, 4, and 5 (P<0.01). 2. According to finishing and polishing procedures. the surface roughness of Co-Cr alloy, Ni-Cr alloy, and Co-Cr-Ti alloy was decreased in the order of group 1, 2, 3, 4, 5, and 6 (p<0.01). 3. There was not statistically significant difference in the surface roughness among three metals of precious metals in group 1 but was significant difference in group 2, 3, 4, and 5 (P<0.05). 4. There was not statistically significant difference in the surface roughness among three metals of non-precious metals in all groups. 5. When the surface roughness of the smoothest surface of each metal, enamel. porcelain, and resin was compared, porcelain was the smoothest and the surface roughness was decreased in the order of Ni-Cr alloy. Co-Cr alloy. Co-Cr-Ti alloy, resin. Ag-Pd alloy, ceramic gold alloy type III gold alloy, and enamel (P<0.01). The results of this study indicate that the finishing and polishing procedures should be carried out in a logical, systematic sequence of steps and the harder non-precious metals may be less resistance to abrasion than are the softer precious metals.

• 전기화학회지
• /
• 제16권1호
• /
• pp.52-58
• /
• 2013

고분자 전해질 연료전지(Polymer Electrolyte Membrane Fuel Cell, PEMFC) 상용화를 위해 해결해야 할 과제 중의 하나인 가격 저감을 이루기 위한 방법으로 백금 촉매를 대신할 비귀금속(non-precious metal) 촉매 제조에 관한 연구를 수행하였다. 비귀금속 촉매의 합성은 산소환원반응(oxygen reduction reaction, ORR)의 활성점으로 알려져 있는 코발트-질소(Co-N) 결합을 형성하기 위해 질소를 포함하는 폴리아닐린(PANI)과 코발트염(Co precursor), 그리고 카본 블랙(C)을 일정한 비율대로 혼합한 후 특별한 열처리 과정 없이 단순한 화학적 환원법에 제조되었다. 제조된 Co-PANI-C 복합 촉매의 구조 분석을 위해 X-선 회절분석(X-ray diffraction, XRD)과 열중량분석(thermogravimetric analysis, TGA)을 실시하였고, ORR에 대한 활성을 평가하기 위해 rotating disk electrode(RDE) 및 rotating ring disk electrode(RRDE) 측정을 수행하였다. 그 결과 Co-PANI-C 복합 촉매는 ORR반응에 대한 개시 전압은 백금 촉매보다 60 mV 밖에 낮지 않은 값을 보였지만, 반응에 의해 발생되는 환원 전류는 여전히 백금 촉매보다 낮은 값을 보였다. 이 밖에도 전극 회전 속도에 따른 ORR 특성 변화, 전압 사이클 회수에 따른 내구성 변화, 연료전지 적용 시 성능 변화에 대해 논의할 것이다.

• 대한치과기공학회지
• /
• 제35권1호
• /
• pp.43-48
• /
• 2013

Purpose: This study aimed to investigate the shear bond strength for non-precious alloy castings without beryllium, which has been used repeatedly for economical reason. Methods: The Schmitz-Schulmeyer test method was used to evaluate the shear bond strength between the non-beryllium Ni-Cr alloy Vera Bond 2V(AlbaDent, Inc. USA) and the Ceramco 3(Dentstply, York, PA, USA) porcelain powder. The maximum loading and shear bond strength were measured. The average shear strength(MPa) was analyzed with the one-way ANOVA and the Tukey's test( =.05). The fracture specimens were examined using Microscope to determine the failure pattern. Results: The mean shear bond strengths(SD) in MPa were group A(100% new metal) control 28.72(3.31); group B(50% new + 50% reused) 27.28(1.13); group C(all reused) 26.61(5.47). Microscope examination showed that group A and B specimens presented mixed failure, and group C specimens showed adhesive failure. Conclusion: In conclusion, forward this non-precious alloy dose not contain beryllium for how should use a more systematic study and for future advanced research is performed giving effect to be considered desirable.

• Journal of Ceramic Processing Research
• /
• 제19권6호
• /
• pp.499-503
• /
• 2018

In this paper, cobalt embedded in nitrogen and sulfur co-doped carbon nanotubes (CoNSTs) were synthesized for oxygen reduction reaction (ORR) catalysts. The CoNSTs were prepared through a facile heat treatment method without any templates. Different amounts of the metal salt were employed to examine the physicochemical and electrochemical properties of the CoNSTs. The CoNSTs showed the bamboo-like tube morphology with the encased Co nanoparticles in the tubes. Through the x-ray photoelectron spectroscopy analysis, the catalysts exhibited different chemical states of the nitrogen and sulfur species. As a result, the CoNST performed high activity toward the ORR in an acidic condition with the onset potential of 0.863 V (vs. reversible hydrogen electrode). It was clearly demonstrated from the electrochemical characterizations that the quality of the nitrogen and sulfur species significantly influences the ORR activity rather than the total amount of the dopants.

• 대한치과기공학회지
• /
• 제4권1호
• /
• pp.27-31
• /
• 1982

• 대한치과기공학회지
• /
• 제42권2호
• /
• pp.65-71
• /
• 2020

Purpose: To know the transmittance of light when wearing shading goggles and to protect eyes from blue light emitted from dental scanner when using CAD/CAM works or inducing polymerization reactions of dental resin with curing unit and infrared light occurred when melting Dental precious metal and non-precious metal alloys. Methods: By measuring and comparing the average transmittances of blue light, visible light and infrared ight by using UV-Vis Spectrophotometer analysis measuring instrument, I compared 3 GREEN Color Goggles worn when casting Dental precious metal and non-precious metal alloys, and compared each of YELLOW, ORANGE Color Goggles worn when using Dental CAD/CAM scanners and Light Curing(LED) the Dental resin. Results: In blue light range, YELLOW Color Goggles are more effective than ORANGE Color Goggles. In infrared light range, No.12 Goggles are more effective than No.10 and No.11 Goggles. Conclusion: When wearing blue light shading goggles to avoid harmful blue light occurred in using dental scanner and curing light, and when wearing infrared light shading goggles to avoid harmful infrared light during casting, to avoid the Side Effects like transmittance rate of blue light and infrared light goggles becomes too high to block appropriate amount of harmful light or too low that causing lower image clarity.

• Journal of Electrochemical Science and Technology
• /
• 제15권2호
• /
• pp.207-219
• /
• 2024

Metal-N-C (MNC) catalysts have been anticipated as promising candidates for oxygen reduction reaction (ORR) to achieve low-cost polymer electrolyte membrane fuel cells. The structure of the M-N_x moiety enabled a high catalytic activity that was not observed in previously reported transition metal nanoparticle-based catalysts. Despite progress in non-precious metal catalysts, the low density of active sites of MNCs, which resulted in lower single-cell performance than Pt/C, needs to be resolved for practical application. This review focused on the recent studies and methodologies aimed to overcome these limitations and develop an inexpensive catalyst with excellent activity and durability in an alkaline environment. It included the possibility of non-precious metals as active materials for ORR catalysts, starting from Co phthalocyanine as ORR catalyst and the development of methodologies (e.g., metal-coordinated N-containing polymers, metal-organic frameworks) to form active sites, M-N_x moieties. Thereafter, the motivation, procedures, and progress of the latest research on the design of catalyst morphology for improved mass transport ability and active site engineering that allowed the promoted ORR kinetics were discussed.

• Korean Chemical Engineering Research
• /
• 제60권1호
• /
• pp.151-158
• /
• 2022

고가의 귀금속 촉매는 고분자 전해질 연료전지의 상업화에 걸림돌로 인식되어 저가의 비귀금속 촉매 연구가 활발하다. 본 연구에서는 Fe-N-C 촉매를 킬레이팅이 가능한 4가지 다른 질소 전구체 N,N,N',N'-detramethylethylenediamine(TMEDA), 1,2-ethylenediamine (EDA), m-dicyanobenzene (DCB), dicyandiamide (DCDA)를 이용하여 700, 800, 900, 1000 ℃에서 합성하였다. 촉매의 물리적 특성은 주사전자현미경, X선 회절분석기, 자동원소분석기를 이용하여 분석하였다. 이를 통해 촉매 표면 형태 및 원소의 분산도와 에너지 분산형 X-선 분광을 적용하여 Fe의 함량을 확인하였다. 또한 비금속 원소의 함량과 Fe의 담지 여부 등을 확인하였다. 전기화학적 특성은 순환 전압전류법과 선형주사전위법을 통해 촉매의 전기화학적 산소 환원에 대한 활성과 전자전달수 등을 분석하였다. 결과에 따르면 질소 전구체로 EDA를 사용하여 800 ℃의 소성온도에서 합성한 촉매가 가장 높은 산소 환원 활성을 보였다. 이 연구 결과는 고가의 귀금속을 대체하기 위한 노력에 도움이 될 것으로 예상된다.