• IEMEK Journal of Embedded Systems and Applications
• /
• v.13 no.5
• /
• pp.245-252
• /
• 2018

Non-volatile RAM devices have been increasingly viewed as an alternative of DRAM main memory system. However some technologies including phase-change memory (PCM) are still suffering from relatively poor write performance as well as limited endurance. In this paper, we introduce a proactive last-level cache management to efficiently hide a low write performance of non-volatile main memory systems. The proposed method significantly reduces the cache miss penalty by proactively evicting the part of cachelines when the non-volatile main memory system is in idle state. Our trace-driven simulation demonstrates 24% performance enhancement, compared with a conventional LRU cache management, on the average.

• Journal of Power Electronics
• /
• v.13 no.1
• /
• pp.31-39
• /
• 2013

The conventional non-isolated boost converter has some drawbacks such as poor dynamic performance and a discontinuous output current, which make it unsuitable for battery charging applications. In spite of its compactness and lightness, it is not preferred as a charger of portable electronic devices. In this paper, a non-isolated boost converter topology for Li-ion batteries suitable for fuel cell powered laptop computers is proposed and analyzed. The proposed converter has an additional inductor at the output to make a continuous output current. This feature makes it suitable for charger applications by eliminating the disadvantages of the conventional non-isolated boost converter mentioned above. A prototype of the proposed converter is built for the Li-ion battery charger of a laptop computer to prove the validity and advantages of the proposed topology.

• Nutrition Research and Practice
• /
• v.10 no.4
• /
• pp.418-423
• /
• 2016

BACKGROUND/OBJECTIVES: Spirulina, a blue-green alga, is widely produced and commercialized as a dietary supplement with bio- and immune-modulatory functions. We have previously shown that spirulina had favorable effects on lipid profiles, immune functions, and antioxidant capacity in healthy Korean elderly. Despite favorable effect of spirulina supplementation, some sub-populations have shown a poor response to supplementation. Obesity is a factor related to poor-response. Therefore, the purpose of this study was to determine the immuno-modulation, antioxidant capacity, and lipid-lowering effect of spirulina in obese and non-obese Korean elderly. SUBJECTS/METHODS: The subjects were 78 elderly aged 60-87 years. In a randomized double blind, placebo-controlled study, subjects were fed either placebo or spirulina daily, at 8 g for 12 weeks. Subjects were divided into the non-obese group and the obese group based on body mass index (BMI) criteria for Asians suggested by the International Obesity Task Force: $BMI<25kg/m^2$ (non-obese) and $BMI{\geq}25kg/m^2$ (obese). RESULTS: In the non-obese group, spirulina supplementation showed a significant lowering effect on plasma concentration of total cholesterol and LDL-cholesterol, a significant increase in interleukin (IL)-2 concentration (P < 0.01) and a significant increment (P < 0.05) in IL-2/IL-6 ratio, and a significant increase in total antioxidant status level and a significant decrease in thiobarbituric acid reactive substances level. However, these effects were not observed in the obese group. CONCLUSION: These results demonstrated that blood lipid lowering and immune and antioxidant improving response for spirulina supplement was affected by obesity in Korean elderly.

• Journal of Welding and Joining
• /
• v.16 no.6
• /
• pp.77-85
• /
• 1998

Effects of non-cleaning and cleaning fluxes on the wetting properties and defects at flow soldered joints were investigated. Non-cleaning flux (R-type of 3.3% solid content) and cleaning flux (RMA-type of 15% solid content) were used. Wetting test was accomplished by wetting balance method with changing surface state of wetting specimen, CU. Sn-37%Pb solder was used for wetting test and flow soldering. As experimental results, the wetting time for vertical force from the surface tension being zero was mainly affected by surface state of the wetting specimen. Non-cleaning flux had a good wettability compared with cleaning flux. In case of non-cleaning flux, conveyor speed had a great affection to defects of bridge, icicle, and poor solder.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2016.04a
• /
• pp.897-899
• /
• 2016

In recent years, BLE technology has received extensive attention and has been applied to all aspects of life. The existing BLE device has two methods, one is the connection method, and the other is a non-connection method. The representative profile of the connection method is the proximity file. The most typical example of Non-connection method BLE device is a beacon. However, they are both independent and have their own shortcomings. Connection method device can provide service for only one user, others can't use. Security performance of Non-connection method BLE device is poor and the device can't be controlled by the user. In this paper, a combination-mode BLE device profile design scheme is presented, which combines with the previous two methods, and solves the defaults. And We define a dual purpose advertising package that can be used in a normal environment as well as in a disaster environment. Finally, a unidirectional Control idea is proposed. Through performance evaluation, we found that the device has strong stability and low power consumption.

• Journal of Korean Medicine for Obesity Research
• /
• v.6 no.1
• /
• pp.1-10
• /
• 2006

Localized fat and cellulate have not only esthetic but health problem, they are treated by surgical or non-surgical method. There are elecro-acupuncture, ultrasound, radio frequency, endermologie, mesotherapy, and carbon dioxide therapy in prevalent non-surgical treatments. We reviewed the studies on them to analyze their seicntific evidence. The studies are not many. They reported good results of circumference loss or appearance improvement of histologic change but most of them have poor study design. Before marketing or using these modalities, it is ontcal to evaluate to their effectiveness through strict and scientific clinical trials.

• Journal of the Korean Wood Science and Technology
• /
• v.38 no.2
• /
• pp.85-93
• /
• 2010

Japanese cedar has low density and poor mechanical performance. Manufacturing glue-laminated timber (glulam) is the best way to compensate for its poor mechanical performance. The Korean Standard (KS) confines outermost lamina of glulam to higher grade than E8, but the yield of higher than grade E8 from logs is only 6.5%. Therefore, the aim of this study is to investigate the possibility of non-Korean-Standard glulam in structural applications. Allowable stresses determined by both hand-calculation and Monte-Carlo simulation show a higher allowable stress than that of the KS-standard glulam of 6S-22B. In the Korean Standard (KS), knot characteristics are not taken into account. Japanese cedar has relatively small knots. We believe that the small knots in Japanese cedar contribute to a higher allowable stress than the KS-standard glulam would predict. The species classification of KS is required to be further subdivided into sub-species groups based on knot characteristics.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.2 no.1
• /
• pp.57-62
• /
• 2003

Machining technique for optical crystals with single point diamond turning tool is reported in tills paper. The main factors influencing the machined surface quality are discovered and regularities of machining process are drawn. Optical crystals have found more and more important applications in the field of modern optics. Optical crystals are mostly brittle materials of poor machinability The traditional machining method is polishing which has many shortcomings such as low production efficiency, poor ability to be automatically controlled and edge effect of the workpiece. SPDT has been widely used in manufacturing optical reflectors of non-ferrous metals such as aluminum and copper which are easy to be machined for their proper ductility. But optical crystals being discussed here are characterized by their high brittleness which makes it difficult to obtain high quality optical surfaces on them. The purpose of our research is to find the optimum machining conditions for ductile cutting of optical crystals and apply the SPDT technique to the manufacturing of ultra precision optical components of brittle materials. As a result, the cutting force is steady, the cutting force range is 0.05-0.08N. The surface roughness is good when spindle is above 1400rpm, and feed rate is small. The influence of depth of cut is very small.

• Korean Institute of Interior Design Journal
• /
• v.19 no.5
• /
• pp.190-197
• /
• 2010

This is a study about public-regeneration-architecture design of the 3rd world damaged by the development of capital society of the 20th century and from the perspective of economically poor, anti-capitalist development from non-profit design organization. Active among such non-profit design organizations, the sustainable design characteristics of public-regeneration-architecture of the Architecture for Humanity will be discussed. I help it so as a continuous possibility design to have been given to public-regeneration-architecture of the Architecture for Humanity is small, and I establish a construction space at a few costs to people in a situation to be environmentally interior economic, to be cultural, and I am large, and to be able to generate profitable construction by environment at activation of a local community and worldwide dimensions. I look through a sustainable design way of this study classifies it to cultural sustainability that ecology-cultural approach in the environmental sustainability result ecology - central approach, and how I was applied to materials of construction, color, a pattern, a construction method, space configuration etc. There is the meaning to try to analyze a characteristic of a sustainable design to have appeared to public-regeneration-architecture of the Architecture for Humanity which I make a symbiosis, and you can live on it how in the present cities that city poor floor will add to.

• Industrial Engineering and Management Systems
• /
• v.6 no.2
• /
• pp.136-145
• /
• 2007

The selection of suppliers and the determination of order quantities to be placed with those suppliers are important decisions in a supply chain. In this research, a non-linear mixed integer programming model is presented to select suppliers and determine the order quantities. The model considers the purchasing cost which takes into account quantity discount, the cost of transportation, the fixed cost for establishing suppliers, the cost for holding inventory, and the cost of receiving poor quality parts. The capacity constraints for suppliers, quality and lead-time requirements for the parts are also taken into account in the model. Since the purchasing cost, which is a decreasing step function of order quantities, introduces discontinuities to the non-linear objective function, it is not easy to employ traditional optimization methods. Thus, a heuristic algorithm, called particle swarm optimization (PSO), is used to find the (near) optimal solution. However, PSO usually generates initial solutions randomly. To improve the PSO solution quality, a heuristic procedure is proposed to find an initial solution based on the average unit cost including transportation, purchasing, inventory, and poor quality part cost. The results show that PSO with the proposed initial solution heuristic provides better solutions than those with PSO algorithm only.