• Food Science of Animal Resources
• /
• v.38 no.1
• /
• pp.189-202
• /
• 2018

This study was conducted to evaluate the effects of fermenting temperature on the applicability of Lactobacillus plantarum for production of fermented sausages as starter cultures, and its applicable efficiency was also compared with those inoculated with commercial starter culture or non-inoculated control. The L. plantarum isolated from a naturally-fermented meat, identified by 16S rDNA sequencing and again identified by de novo Assembly Analysis method was used as a starter culture. Six treatments: 3 with L. plantarum at different fermenting temperatures (20, 25 and $30^{\circ}C$), and other 3 treatments (1 with commercial starter culture, 1 with its mixture with L. plantarum and 1 non-inoculated control) fermented under the same conditions ($25^{\circ}C$) were prepared. Results revealed that the fermenting temperature considerably affected the pH change in samples added with L. plantarum; the highest pH drop rate (1.57 unit) was obtained on the samples fermented at $30^{\circ}C$, followed by those at $25^{\circ}C$ (1.3 unit) and $20^{\circ}C$ (0.99 unit) after 4 days fermentation. Increasing the temperature up to $30^{\circ}C$ resulted in significantly lower spoilage bacteria count (5.15 log CFU/g) and lipid oxidation level in the products inoculated with L. plantarum. The sensory analysis also showed that the samples added with L. plantarum at $30^{\circ}C$ had significantly higher odor, taste and acceptability scores than those fermented at lower temperatures. Under the same processing condition, although the L. plantarum showed slightly lower acidification than the commercial starter culture, however, it significantly improved the eating quality of the product.

• Toxicological Research
• /
• v.33 no.1
• /
• pp.43-48
• /
• 2017

With ultraviolet and visible light exposure, some pharmaceutical substances applied systemically or topically may cause phototoxic skin irritation. The major factor in phototoxicity is the generation of reactive oxygen species (ROS) such as singlet oxygen and superoxide anion that cause oxidative damage to DNA, lipids and proteins. Thus, measuring the generation of ROS can predict the phototoxic potential of a given substance indirectly. For this reason, a standard ROS assay (ROS assay) was developed and validated and provides an alternative method for phototoxicity evaluation. However, negative substances are over-predicted by the assay. Except for ultraviolet A (UVA), other UV ranges are not a major factor in causing phototoxicity and may lead to incorrect labeling of some non-phototoxic substances as being phototoxic in the ROS assay when using a solar simulator. A UVA stimulator is also widely used to evaluate phototoxicity in various test substances. Consequently, we identified the applicability of a UVA simulator to the ROS assay for photoreactivity. In this study, we tested 60 pharmaceutical substances including 50 phototoxins and 10 non-phototoxins to predict their phototoxic potential via the ROS assay with a UVA simulator. Following the ROS protocol, all test substances were dissolved in dimethyl sulfoxide or sodium phosphate buffer. The final concentration of the test solutions in the reaction mixture was 20 to $200{\mu}M$. The exposure was with $2.0{\sim}2.2mW/cm^2$ irradiance and optimization for a relevant dose of UVA was performed. The generation of ROS was compared before and after UVA exposure and was measured by a microplate spectrophotometer. Sensitivity and specificity values were 85.7% and 100.0% respectively, and the accuracy was 88.1%. From this analysis, the ROS assay with a UVA simulator is suitable for testing the photoreactivity and estimating the phototoxic potential of various test pharmaceutical substances.

• The Korean Journal of Pain
• /
• v.4 no.2
• /
• pp.127-132
• /
• 1991

Recently a non-electronic, disposable and portable infusor(Baxter infusor with patient control module, Baxter health care Co., Deerfield IL 60015 USA: BI $\bar{c}$ PCM) has been developed that will deliver both a continuous drug infusion as well as allow the patient to deliver extra doses of medication on a demand basis under predetermined limitation of analgesics. Patients may also not require as high analgesic dose rate to control pain when the acceptable and tolerable level of pain relief can be maintained by this device. From April l99l, we have used a total l93 units of BI $\bar{c}$ PCM. These units consisting of two components which one made by a balloon reservoir(capacity 65 ml, flow rate 0.5 ml/hr) to store medication and to regulate the pump power(490 torr), and another two PCMs to regulate additional analgesic administration by patients demand at intervals of 1S minutes and 60 minutes. The dose administered to the patient can be varied by changing the concentration of the infusate within the balloon reservoir. These devices were utilized for the pain control of 44 patients. These patients were divided into two groups. Twenty seven cases had cancer pain and 17 cases had non-cancer pain. The Touhy needle(No. l8 G.) tip was inserted into the epidural space and was used to guide the catheter to the spinal nerve level corresponding to the most painful area. The device was connected to the opposite site of the catheter tip and was filled with 60 ml of mixture solution such as 0.5% bupivacaine 15 ml, morphine HCl 10 mg, trazodone 10 ml, Tridol 3 ml and normal saline 31 ml were administed as the initial dose. When the initial dose was less effective, the next dose could be varied by increasing the concentration of bupivacaine, by adding more morphine (5~10 mg), and by reducing the volume of normal saline. Using these modules of drug self administration, we experienced the following: 1) Improvement of patient's self titration of analgesic requirement was provided. 2) The patients anxiety with pain recurrence resulting from delays in administering pain control medication was decreased significantly. 3) The working load accompanying with the single bolus injection as the usual method was reduced remarkably. 4) There was urinary retention in 5 cases and pruritus in 4 eases which developed as side effects but respiratory depression and vomiting was not encountered in a single case.

• Toxicological Research
• /
• v.31 no.3
• /
• pp.255-264
• /
• 2015

Heterocyclic amines (HCAs) and acrylamide are unintended hazardous substances generated by heating or processing of foods and are known as carcinogenic and mutagenic agents by the animal experiments. A simple method was established for a rapid and accurate determination of 12 types of HCAs (IQ, MeIQ, Glu-P-1, Glu-P-2, MeIQx, Trp-P-1, Trp-P-2, PhIP, $A{\alpha}C$, $MeA{\alpha}C$, Harman and Norharman) and acrylamide in three food matrices (non-fat liquid, non-fat solid and fat solid) by isotope dilution liquid chromatography-tandem mass spectrometry (LC-MS/MS). In every sample, a mixture of internal standards including $IQ-d_3$, $MeIQx-d_3$, $PhIP-d_3$, $Trp-P-2-^{13}C_2-^{15}N$ and $MeA{\alpha}C-d_3$ was spiked for quantification of HCAs and $^{13}C_3$-acrylamide was also spiked for the analysis of acrylamide. HCAs and acrylamide in sample were extracted with acetonitrile and water, respectively, and then two solid-phase extraction cartridges, ChemElut: HLB for HCAs and Accucat: HLB for acrylamide, were used for efficiently removing interferences such as pigment, lipid, polar, nonpolar and ionic compounds. Established method was validated in terms of recovery, accuracy, precision, limit of detection, limit of quantitation, and linearity. This method showed good precision (RSD < 20%), accuracy (71.8~119.1%) and recovery (66.0~118.9%). The detection limits were < 3.1 ng/g for all analytes. The correlation coefficients for all the HCAs and acrylamide were > 0.995, showing excellent linearity. These methods for the detection of HCAs and acrylamide by LC-MS/MS were applied to real samples and were successfully used for quantitative monitoring in the total diet study and this can be applied to risk assessment in various food matrices.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.11
• /
• pp.1075-1086
• /
• 2008

In order to investigate the applicability and suitability of the industrial by-products to apply mono-layer cover system for non-sanitary landfill sites, 6 different industrial by-products, such as construction waste, bottom ash, gypsum, blast furnace and steel manufacture slags, and stone powder sludge, were evaluated. Various physicochemical and hydrodynamic properties of the industrial byproducts were investigated. The environmental safety was monitored using batch and long-term leaching tests as well. In addition, the flexibility of plants was observed by cultivating them in the industrial by-products. The results for physicochemical properties indicate that most of the materials considered appeared to be suitable for landfill cover. Particularly, the concentration levels of hazardous elements regulated by the Korean Law for Waste Management did not exceed the regulatory limits in all target materials. In addition, the concentrations of regulated elements for the Korean Soil Conservation Law were examined below the regulatory limits in most of materials considered, except for the stone powder sludge. The results of batch and long-term experiments showed bottom ash and construction waste were the most suitable materials for landfill cover among the industrial by-products considered. The results of plant studies indicate that the bottom ash among industrial by-products considered was most effective in developing vegetation on landfill site, showing fast germination and large growth index. At the final covering system made of mixture of soil and bottom ash, the optimum application rate of farmyard manure was observed to be 40-50 Mg/ha.

• Journal of Animal Science and Technology
• /
• v.44 no.5
• /
• pp.561-572
• /
• 2002

The objective of this study was to evaluate a feed additives used mainly in lactating cow diets in transient pregrent cow diets. The study was conducted as a completely randomized design with forty Holstein pregnant cows to determine the effect of feeding Aspergillus oryzae(T2), Saccharomyces cerevisiae mixture(T3) and enzyme(cellulase, xylanase) - releasing chemicals(ERC) (T4) on the dry matter intake, milk yield, milk composition and metabolic disorders. Dry matter intake was similar among treatments for 3 weeks prepartum but cows fed enzyme tended to increased feed intake compared to no additives treatment both in calving day and for 3 weeks postpartum. Cows fed Aspergillus oryzae, Saccharomyces cerevisiae and ERC produced more milk than those fed no additives. However, there is no significant difference among treatments. Concentration of glucose was not significantly different among treatment prepartum but that in plasma of cows fed ERC was higher at calving and 3 weeks postpartum compared to others. Increase in NEFA began at 3 weeks prepartum and accelerate during the final 7 days before calving at all treatments but lower for ERC-treated cows at calving and 3 weeks postpartum. Ca concentration not different among treatment prepartum and postpartum. Corticoid content decreased significantly for cows fed ERC compared to those fed non-additives. Metabolic disorder was not occurred in cows fed ERC. However, ketosis and displased abomasum were happened 1 cow when fed non-additives, metritis 1 cow when fed Aspergillus oryzae and retained placenta 1 cow in all treatments except cows fed ERC.

• KSBB Journal
• /
• v.21 no.4
• /
• pp.260-266
• /
• 2006

Methanol induction conditions with various additives for the enhanced production of recombinant hepatitis B surface antigen(HBsAg) were investigated in Pichia pastoris, which can utilize methanol as a carbon source and produce recombinant proteins under the control of strong, tightly-regulated alcohol oxidase(AOX) promoter. The presence of non-methanol carbon sources such as glycerol and glucose fully repressed the expression of AOX promoter. Various additives were tested to improve the production of recombinant protein and it was found that sorbitol could be a good carbon source during methanol induction period. An optimized concentration of amino acid mixture enhanced the production of HBsAg significantly. Pluronic F-68, a non-ionic surfactant, also improved the production of HBsAg without inhibiting cell growth. Addition of oleic acid at 0.01%(v/v) during the induction period showed positive effect on the production of HBsAg. Finally, 1.2%(v/v) of trace salts enhanced the production of HBsAg 1.9 times compared to that of control culture.

• Microbiology and Biotechnology Letters
• /
• v.41 no.1
• /
• pp.119-127
• /
• 2013

Twenty-three strains of Leuconostoc species and 45 strains of Weissella species inhibiting the growth of Lactobacillus sakei, one of the most populous lactic acid bacteria in over-ripened kimchi, were isolated from kimchi in our previous study. Among these hetero-fermentative 68 strains, Leuconostoc mesenteroides CK0128, Weissella cibaria CK0633, and W. cibaria KK0797 exhibited a relatively high survival rate in MRS medium, which was adjusted to pH 4.3 using an acid mixture consisting of acetic and lactic acids, and produced a large amount of exopolysaccharides. The culture supernatants of 3 strains were fractionated by a molecular weight cutter and lyophilized. The fractions with a molecular weight smaller than 3,000 Da showed antagonistic activity against Staphylococcus aureus and Lb. sakei. The anti-bacterial substances were very stable to heat treatments ($121^{\circ}C$, 15 min) and active at acidic conditions below pH 5. ${\alpha}$-Amylase, lipase, and proteolytic enzymes (proteinase K and pepsin) did not affect their activities. These non-proteinaceous anti-bacterial substances inhibited the growth of several food pathogens.

• Environmental Analysis Health and Toxicology
• /
• v.5 no.3_4
• /
• pp.19-28
• /
• 1990

Nitroarenes are ubiquitous environmental pollutants displaying potent mutagenicity in bacteria and carcinogenicity in mammal. In this study, the concentration of nitroarenes in coarse and fine particles and mutagenicity of POC$\_$N/ fraction was investigated in suspended particulates at the Shinchon and Bulkwang area of Seoul. The suspended particulates were collected bimonthly by a high volume cascade impactor air sampler from July 1987 to May 1988. Extractable organic matter was obtained by ultrasonic extraction on diethly ether/cyclohexane (8/2, v/v). Neutral fraction was obtained by liquid-liquid extraction. Polar neutral organic compounds (POC$\_$N/) was fractionated by thin-layer chromatography. Finally, the concentrations of nitroarenes in POC$\_$N/ fraction were measured and determined by capillary gas chromatography. Direct and indirect mutagenicity of POC$\_$N/ fraction were measured using Salmonella typhimurium TA 98. The result were as follows: 1) Major nitroarenes at the Shinchon area was 1-nitropyrene and at the Bulkwang area it was 2,7-dinitro-9-fluorenone during the year. 2) Average concentration of total nitroarenes measured was 67.26 ng/m$^3$in fine particles which was 1,3 folds higher that in coarse particle (52.30 ng/m$^3$). 3) Annual pattern of nitroarenes concentrations revealed that concentration during heating season (Feb., Jan., Mar.) was 2.2 folds higher than that in non heating season (May, Jul., Sep.). Concentration of each season has 157.68 ng/m$^3$and 80.39 ng/m$^3$. 4) The mutagenic activity of POC$\_$N/ fraction from fine particles was higher compared to that of coarse particles and was increased when metabolically activated, with 59 mixture. Mutagenicities, Metabolically activated, were significantly different between Shinchon and Bulkwang area, 322.8 rev/250 $\mu\textrm{g}$/plate and 286.8 rev/250 $\mu\textrm{g}$/plate, respectively. 5) Annual pattern of mutagenicity of POC$\_$N/ fraction revealed that mutagenicity during the heating season was 1.7 folds higher at Shinchon area and 1.2 folds higher at Bulkwang than during the non heating season. The variable contents and levels of nitroarenes in suspended particulates may affect human health significantly. Further studies such as risk assessment should be conducted on the basis of these kind of studies.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.57 no.2
• /
• pp.127-131
• /
• 2012

In this study we examined the changes in expression of pigments in black rice during kernel development, which were sampled at 2~3-day intervals to the 40th day after flowering. The first expression of pigment on kernels was observed on the seed coat about 5 days after flowering. At that times, the ratio of pigment expression was 0.08% of total area. The order in expression of pigments in black rice during kernel development was top first, followed by bottom, dorsal side, then ventral side. Maximum percentage of the total colored area in kernel was about 25 days after flowering. After that, the color has changed to dark purple from pale purple during kernel development after flowering. After harvesting, the non-uniform color kernels were observed. As a result, the ventral side in a kernel was a position of the non-uniform color such as a mixture of pale purple and dark purple. Also, we could be concluded that patten of pigment expression was similar in kernel development.