• Natural Product Sciences
• /
• v.25 no.2
• /
• pp.150-156
• /
• 2019

Conventional extraction of oil and azadirachtin, a botanical insecticide, from Azadirachta indica involves defatting the seeds and leaves using hexane followed by azadirachtin extraction with a polar solvent. In order to simplify the process while maintaining the yield we explored a binary extraction approach using Soxhlet extraction device and hexane and ethanol as non-polar and polar solvents at various ratios and extraction times. The highest oil and azadirachtin yields were obtained at 6 h extraction time using a 50:50 solvent mixture for both neem leaves (44.7 wt%, $720mg_{Aza}/kg_{leaves}$) and seeds (53.5 wt%, $1045mg_{Aza}/kg_{leaves}$), respectively.

• Proceedings of the PSK Conference
• /
• 2003.10b
• /
• pp.220.2-220.2
• /
• 2003

Many interference in blood should be considered for non-invasive blood glucose level monitoring by near-infrared spectroscopy because blood glucose concentration is about 0.1% (w/v) in normal state. In this study, we investigated the influence of other blood components on blood glucose level monitoring by near-infrared spectroscopy. It carried out by newly developed portable type-NIR system (1100∼2200 nm). Spectrum features of NIR diffuse spectral data were investigated for some blood compnents powder such as hemoglobin, blood serum albumin, urea, uric acid, ascorbate, glucose, cholesterol and as adding glucose powder into other blood components powder mixture. (omitted)

• Analytical Science and Technology
• /
• v.35 no.1
• /
• pp.1-7
• /
• 2022

This study suggests a new one-step fluorescent cyanoacylate-fuming method for developing fingerprints by using a CAB mixed with dimethylaminobenzalde (DMAB) and cyanoacylate (CA) in a specific ratio. CAB is prepared by mixing 2.5 % (w/w) DMAB with CA and fumigated at 180 ℃. Under these conditions, developing fingerprints showed the best results. The fuming method using CAB develops latent fingerprints into fluorescence and has a higher sensitivity than CA, and it showed comparable or better contrast to existing fluorescence enhancement methods. It was also applicable on a variety of non-porous surfaces that can be encountered at ordinary times. This method is more useful than conventional fluorescent dyeing methods in that it minimizes damage to fingerprints or samples, makes it easy to manufacture, saves time, and can use existing current equipment as it is.

• Advances in materials Research
• /
• v.12 no.1
• /
• pp.1-13
• /
• 2023

The combination of cobalt ferrite and natural rubber has a potential to enhance the functional properties of rubber ferrite composites available on the market. In this study, cobalt ferrite was synthesized by the sol-gel method with tapioca starch as a cheating agent and then incorporated into natural rubber using an internal mixer. The curing characteristics, magnetic hysteresis, complex permeability, and permittivity of the rubber ferrite composites were studied as a function of the loading from 0 to 25 phr. The cure time and scorch time tended to reduce with the addition of non-reinforced cobalt ferrite fillers. The remanent and saturation magnetizations were linearly proportional to the cobalt ferrite loading, consistent with the rule of mixture. On the other hand, the increase in cobalt ferrite loading from 5 to 25 phr slightly affected the coercive field and the complex permeability. Using the maximum loading of 25 phr, both real and imaginary parts of the permittivity were significantly raised and reduced with the frequency in the 10-300 MHz range.

• Educational Technology International
• /
• v.24 no.2
• /
• pp.331-358
• /
• 2023

This paper explores the impact of mobile device usage frequency in the classroom on students' perceptions of their use. To assess this, we created a survey that measured students' perceived frequency, usefulness, and convenience of using mobile devices, using a reversed Technology Acceptance Model. Through the analysis of responses from 781 Korean students, utilizing confirmatory item factor analyses and a structural equation mixture model, we found that the effect of frequent mobile device use on students' positive perceptions is non-linear. As the frequency reaches to a certain level, the effect sizes of the frequency in the positive perceptions diminishes. Additionally, students who used mobile devices less frequently in class reported higher levels of difficulties in using the devices. This study introduces a tool for evaluating multiple aspects of students' perceptions regarding mobile device use and offers a framework for understanding the relationship between usage frequency, usefulness, and convenience.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.26 no.10
• /
• pp.1458-1464
• /
• 2002

$CO_2$ is well known greenhouse gas which is the major source of global warming. Reducing $CO_2$ emission in combustion process can be achieved by increasing combustion efficiency, oxygen enriched combustion and recirculation of the emitted $CO_2$ gas. Stability of non-premixed flame in oxygen enriched environment will be affected by the amount of oxygen, kind of diluents and fuel exit velocity. The effects of these parameters on flame liftoff and blowout are studied experimentally oxidizer coflowing burner. Experiments were divided into three cases according as where $CO_2$gas was supplied. - 1) to coflowing air, 2) to fuel with 0$_2$-$N_2$ coflow, 3) to coflowing oxygen. Flame in air coflowing case was lifted in turbulent region. Flame lift and blowout in laminar region with the increase in $CO_2$ volume fraction in $CO_2$-Air mixture makes flame lift and blowout in laminar region. Increase in oxygen volume fraction makes flame stable-i.e. flame liftoff and blowout occur at higher fuel flowrates. Liftoff height was non-linear function of nozzle exit velocity and affected by the $O_2$ volume fraction. It was found that the flame in $O_2$-$N_2$ coflow case was more stable than $O_2$-$CO_2$ case, Liftoff heights vs (nozzle exit velocity/laminar burning velocity)$^{3.8}$ has a good correlation in $O_2$-$CO_2$ oxidizer case.

• Environmental and Resource Economics Review
• /
• v.22 no.2
• /
• pp.281-307
• /
• 2013

There has been some debates about zero willingness to pay in contingent valuation method research. Therefore, this paper tries to estimate and compare the results of various models to handle zero willingness to pay responses. For this purpose, we have employed parametric estimation such as the mixed model and the spike model, as well as non-parametric estimations. As a result, these models derived WTP estimate different from conventional model, but they also show some weakness. Therefore, in future research, more conservative estimate of the model should be to use rather than specific model.

• Proceedings of the KSAR Conference
• /
• 2003.06a
• /
• pp.26-26
• /
• 2003

Hyaluronic acid (HA)-binding sites have been shown the diagnostic potential fur assessment of sperm maturity, which is related to male fertility. This study was designed to evaluate chromosomal patterns in porcine embryos produced by in vitro fertilization (IVF) and intracytoplasmic sperm injection (ICSI) with non- or HA-binding sperm (HABS). For binding of sperm with HA, sperm incubated in 10 ${mu}ell$ drop containing HA (0.8 mg/ml)-agarose (0.8%) mixture for 15 min. IVF and ICSI with non- or HA-bound sperm examined with matured oocytes at 44 hr after in vitro maturation. Embryos were cultured in 50 ${mu}ell$ of NCSU 23 containing 0.5% BSA for 5 days and then in 50 ${mu}ell$ of NCSU 23 containing 10% FBS for 2 days. For the evaluation of chromosomal aneuploidies, chromosome 1 sub-metacentric specific probe was used in sperm and embryos by fluorescence in situ hybridization (FISH). The frequency of aneuploidy sperm for chromosome 1 was 6.25%. The significant differences following IVF and ICSI with non- or HA-bound sperm were not observed in blastocyst formation rates (18.6, 23.5, and 23.8%) and cell number (61.8 $\pm$ 12.5, 55.5 $\pm$ 7.3, and 59.3 $\pm$ 9.6). Moreover, the percentage of diploidy in 4-cell stage embryos was 57.1% (IVF), 68.8% (ICSI), and 76.3% (ICSI-HABS). These results suggest that HA-binding sites may be a material for selection of normal sperm for ICSI. Therefore HA selection of normal sperm may be reduce the loss to embryonic mortality prior to embryo transfer in pig.

• The Korean Journal of Pain
• /
• v.5 no.1
• /
• pp.29-36
• /
• 1992

This study was objected to evaluate clinical progressions about both the degree of pain relief and the occurrence of morphine tolerance while the epidural analgesia with low dose of morphine, bupivacaine and antidepressant continued repeatedly at every 5 day intervals of the constant-rate infusion(0.5 ml/hr, 60 ml capacity). The subjects were divided to 56 cancer and 36 non-cancer patients who failed to respond to palliative treatments. Before the relief of pain, the pain severity was moderate(10%) and severe(90%). The dose escalation of morphine noted to 11(20%)patients in cancer pain and to one(5%) case only in non-cancer. During the epidural analgesia, the effect of pain relief was moderate(11%) and good(89%). It suggest that the morphine tolerance may be reduced to some degree such as an initial minimum dose of epidural morphine with local anesthetic and antidepressant should be adjusted on an individual basis using the constant-rate infusor, even though rapid dose escalation occurrs in some patients who the diseases progress over a short period of time.

• Food Science and Biotechnology
• /
• v.15 no.2
• /
• pp.207-213
• /
• 2006

The effects of gellan gum (from S. paucimobilis), EPS-CB (exopolysaccharide from S. chungbukensis), and a series of commercial gums (arabic gum, xanthan gum, guar gum, deacyl gellan gum), on the swelling, rheological, and pasting properties of non-waxy rice flour dispersions were investigated. The swelling properties of rice flours in gellan or guar gum dispersion after heating were found to have increased with increasing gum concentrations, but the swelling properties of rice flour/other gum systems decreased with increasing concentrations. The rice flour/gum mixtures showed high shear-thinning flow behavior (n=0.14-0.32), and consistency index (K) was higher in guar gum than other gum dispersions. The initial pasting temperatures and peak times increased along with increasing gum concentration. The peak viscosity of rice flour increased in guar gum and deacyl gellan dispersions, and the breakdown and setback viscosity of the rice flour paste was lowest in the xanthan gum system, but remained higher than those of the control. The apparent viscosities of the rice flour/gellan gum mixture pastes were the highest among the tested combinations.