• Interaction and multiscale mechanics
• /
• v.2 no.1
• /
• pp.45-68
• /
• 2009

An aim of the study is to develop an efficient numerical simulation technique that can handle the two-scale analysis of fluid permeation filters fabricated by the partial sintering technique of small spherical ceramics. A solid-fluid mixture homogenization method is introduced to predict the mechanical characters such as rigidity and permeability of the porous ceramic filters from the micro-scale geometry and configuration of partially-sintered particles. An extended finite element (X-FE) discretization technique based on the enriched interpolations of respective characteristic functions at fluid-solid interfaces is proposed for the non-interface-fitted mesh solution of the micro-scale analysis that needs non-slip condition at the interface between solid and fluid phases of the unit cell. The homogenization and localization performances of the proposed method are shown in a typical two-dimensional benchmark problem whose model has a hole in center. Three-dimensional applications to the body-centered cubic (BCC) and face-centered cubic (FCC) unit cell models are also shown in the paper. The 3D application is prepared toward the computer-aided optimal design of ceramic filters. The accuracy and stability of the X-FEM based method are comparable to those of the standard interface-fitted FEM, and are superior to those of the voxel type FEM that is often used in such complex micro geometry cases.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.26 no.7
• /
• pp.315-321
• /
• 2014

In this study, external condensation heat transfer coefficients (HTCs) of two non-azeotropic refrigerant mixtures of HFC32/HFC152a at various compositions were measured on both 26 fpi low-fin and Turbo-C enhanced tubes, of 19.0 mm outside diameter. All data were taken at the vapor temperature of $39^{\circ}C$, with a wall subcooling of 3~8 K. Test results showed that the HTCs of the tested mixtures on the enhanced tubes were much lower than the ideal values calculated by mass fraction weighting of the pure component HTCs. Also, the reduction of HTCs due to the diffusion vapor film was much larger than that of a plain tube. Unlike HTCs of pure fluids, HTCs of the mixtures measured on enhanced tubes increased, as the wall subcooling increased, which was due to the sudden break-up of the vapor diffusion film with an increase in wall subcooling. Finally, the heat transfer enhancement ratios for mixtures were found to be much lower, than those of pure fluids.

• Applied Biological Chemistry
• /
• v.40 no.3
• /
• pp.225-231
• /
• 1997

Optimization theory was applied to a native and two imported soybeans. Failure stress and stress relaxation curve was measured with rheometer, and color was measured by colorimeter. The effects of each soybean upon the tofu texture were expressed through a non-linear canonical regression model and trace plot. Compared to the other imported soybeans, native soybean produced a higher strength in tofu texture, and showed the positive increase in viscoelastic properties such as instantaneous stress, equilibrium stress and relaxation time, whereas it had no effect on whiteness from reference blend, represented that native soy-bean showed the individual strength upon the selected rheological texture properties. Higher soaking ability in native soybean was selected as a new response for the optimization mixture process, and it contributed positively to the rheological properties of tofu. New soaking process control system during processing and desirability for the mathematical model should be applied for a better mixture design in varieties of soybeans.

• Nuclear Engineering and Technology
• /
• v.5 no.1
• /
• pp.3-12
• /
• 1973

Some physical and chemical properties of wood-plastic combinations(W.P.C.) made of domestic soft woods such as pinus densiflora, pinus rigida and poplus deltoides were measured. The rates of improvement in properties were roughly proportional to the contents of polymer or polymer mixtures in W.P.C. For the W.P.C. obtained by means radiation curing and containing 80% of polymer or polymer mixture, the hardness and water absorptirity were improved 2.2 times and 4 times those of the original wood, respectively. The improvement of hardness was especially remarkable in the W.P.C. made of pinus densiflora and polystyrene(120%) to show 7 times increased hardness. For the W.P.C. obtained by means of thermal curing and containing 80% of polymer or polymer mixture, the hardness and water absorptivity were improved 2.4 times and 3.4 times those of the non-treated woods, respectively. These data indicate that the properties of W.P.C. prepared by means of radiation curing are not much different from those of W. p. C. prepared by means of thermal curing. Both of acid resistancy and alkali resistancy of the W.P.C. were also improved remarkably in comparison with the non-treated wood.

• Journal of Korean Society of Water and Wastewater
• /
• v.29 no.3
• /
• pp.359-370
• /
• 2015

This study developed an up-flow wetland providing either an eco-friendly follow-up process of medium-sized public treatment facility for livestock manure or a non-point source pollution controller near livestock farms. The four bench-scale up-flow wetlands were operated with four different bed media sets. The removal efficiencies of the wetland effluent for CODCr, TN, TP, SS were 35.2 %, 29.5 %, 31.2 % and 52.2 % for set 1(Blank, without reed, with bio-ceramic), 40.6 %, 43.4 %, 42.2 % and 55.4 % for set 2(with bio-reed & without bio-ceramic), 45.2 %, 48.7 %, 46.6 % and 66.3 % for set 3(with bio-reed & bio-ceramic), 32.9 %, 27.3 %, 29.3 % and 54.1 % for Set 4(with reed & bio ceramic), respectively. The set 3 condition having a mixture of bio-reed and bio-ceramic showed the highest efficiency in the bench-scale evaluation. This study suggests a mixture of bio-reed and bio-ceramic as suitable bed media in the construction of artificial wetlands near livestock farms. Soils including the bed media were monitored during the evaluation for trace elements. Soil analysis results were satisfied with the Korean Soil Contamination Standard. This study showed that the up-flow constructed wetland was feasible to treat the effluent livestock wastewater treatment facility.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.489-492
• /
• 2008

This study analyzed the fundamental properties and strength properties of concrete utilizing Bottom Ash as coarse aggregate for concrete. As a result, compared to non-mixture, the slump decreases about 4.5${\sim}$54.2% as the mixing ratio of Bottom Ash increases. However, influence of the air contents is very little. The bleeding shows similar slump characteristics, and the primary stage of bleeding decreases as the mixing ratio of Bottom Ash increases. As the mixing ratio of Bottom Ash increases, the compressive strength decreases. When Bottom Ash is mixed by 40%, compressive strength decreases about 1.1${\sim}$5.3%. Even when Bottom Ash is mixed over 60%, compressive strength decreases sharply and is revealed about 85.2${\sim}$87.7% of non-mixture concrete strength. To utilize Bottom Ash in large quantities, it is thought that the improvement method of strength has to be discussed such as mixing strengthening element.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.33 no.1
• /
• pp.131-138
• /
• 2006

A mixture of metronidazole, ciprofloxacin and minocycline(3Mix) in distilled water or in a root canal sealer were used to disinfect the infected endodontic and periapical lesions. It has been well acknowledged in recent literature that minocycline, a semisynthetic tetracycline derivative, causes discolorations in adult teeth and various other collagenous tissues. In these cases, pulp treatments were finished successfully using a combination of antibiotics but severe discolorations of the teeth were observed. Discolored non-vital posterior tooth was treated using the prosthodontic procedure. And anterior tooth was successfully treated using the walking bleach technique. Bleaching was performed by temporarily placing a mixture of sodium perborate and distilled water into the pulp chamber. There were significant esthetic improvement.

• Structural Engineering and Mechanics
• /
• v.74 no.1
• /
• pp.55-67
• /
• 2020

The common practice to predict the characteristic structural load effects (LEs) in long reference periods is to employ the extreme value theory (EVT) for building limit distributions. However, most applications ignore that LEs are driven by multiple loading events and thus do not have the identical distribution, a prerequisite for EVT. In this study, we propose the composite extreme value modeling approach using clustering to (a) cluster initial blended samples into finite identical distributed subsamples using the finite mixture model, expectation-maximization algorithm, and the Akaike information criterion; (b) combine limit distributions of subsamples into a composite prediction equation using the generalized Pareto distribution based on a joint threshold. The proposed approach was validated both through numerical examples with known solutions and engineering applications of bridge traffic LEs on a long-span bridge. The results indicate that a joint threshold largely benefits the composite extreme value modeling, many appropriate tail approaching models can be used, and the equation form is simply the sum of the weighted models. In numerical examples, the proposed approach using clustering generated accurate extrema prediction of any reference period compared with the known solutions, whereas the common practice of employing EVT without clustering on the mixture data showed large deviations. Real-world bridge traffic LEs are driven by multi-events and present multipeak distributions, and the proposed approach is more capable of capturing the tendency of tailed LEs than the conventional approach. The proposed approach is expected to have wide applications to general problems such as samples that are driven by multiple events and that do not have the identical distribution.

• Korean Journal of Heritage: History & Science
• /
• v.46 no.4
• /
• pp.160-173
• /
• 2013

This research aims to understand the precise character of relics based on literature search and material analysis of the jade excavated from the first buried place of King Jung-jo, and to assess the level of damage through non-destructive diagnosis. Furthermore, scientific conservation treatment was used to restore the original shape of the excavated jade. According to literature search, the excavated jade is known to be jasper, but material analysis showed that it was as a serpentine with the mineral composition of antigorite. Infrared thermography analysis to assess deterioration showed that the internal damage is the result of the interstices developed along the boundary surface of the obtained jade. For conservation treatment of the damaged area on the surface, the jade was filled with a mixture of plaster and glue, and covered with a mixture of acrylic paint and gloss medium for protection, and color was adjusted.

• Tuberculosis and Respiratory Diseases
• /
• v.63 no.3
• /
• pp.242-250
• /
• 2007

Background: Abnormal angiogenesis can induce hypoxia within a highly proliferating tumor mass, and these hypoxic conditions can in turn create clinical problems, such as resistance to chemotherapy. However, the mechanism by which hypoxia induces these changes has not yet been determined. Therefore, this study was conducted to determine how hypoxia induces changes in cell viability and extracellular microenvironments in an in vitro culture system using non-small cell lung cancer cells. Methods: The non-small cell lung cancer cell line, A549 was cultured in DMEM or RPMI-1640 media that contained fetal bovine serum. A decrease in the oxygen tension of the media that contained the culture was then induced in a hypoxia microchamber using a $CO_2-N_2$ gas mixture. A gas analysis and an MTT assay were then conducted. Results: (1) The decrease in oxygen tension was checked the anaerobic gas mixture for 30 min and then reoxygenation was induced by adding a 5% $CO_2-room$ air gas mixture to the chamber. (2) Purging with the anaerobic gas mixture was found to decrease the further oxygen tension of cell culture media. (3) The low oxygen tension resulted in a low pH, lactic acidosis and a decreased glucose concentration in the media. (4) The decrease in glucose concentration that was observed as a result of hypoxia was markedly different when different types of media were evaluated. (5) The decrease in oxygen tension inhibited proliferation of A549 cells. Conclusion: These data suggests that tumor hypoxia is associated with acidosis and hypoglycemia, which have been implicated in the development of resistance to chemotherapy and radiotherapy.