• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.8 no.6
• /
• pp.13-20
• /
• 2005

This study was conducted to examine the growth and physiological characteristics of Polystichum lepidocaulon native fern as affected by soil mixture as an environment modeled on habitate where was sunken-condition. 1. Polystichum lepidocaulon grew well sunken more than non-sunken condition. Under soil mixture of field soil : sand : leaf mold, Plant height, frond width, frond length, stipe length and ornamental value were increased compared with the other soil mixture. 2. Fresh and dry weight of fronds were higher with non-sunken than sunken condition. In sunken condition, fresh and dry weight were better with field soil : sand : leaf mold than the other soil mixture. 3. Number of spore fronds were increased with sunken condition. As sunken condition, sand : leaf mold was better than field soil : sand : leaf mold or leaf mold. 4. Photosynthetic rate, $CO_2$ absorption rate and water efficiency were higher with field soil : sand : leaf mold than that of sand : leaf mold or leaf mold. expect of stomatal conduction and $CO_2$ use efficiency.

• Korean Journal of Food Science and Technology
• /
• v.21 no.3
• /
• pp.364-369
• /
• 1989

Experiments were carried out to investigate on the effect of cryoprotectants to the quality changes of pork and beef muscles during frozen storage . Beef and pork muscles were mixed with various cryoprotectants and stored at $-20^{\circ}C$ in a chest freezer for 12 weeks. Samples were analyzed for pH changes, TBA value, free atty acid contents, water and salt soluble protein extractability. The results obtained are summerized as follows. The pH value in all of cryoprotectants added samples were increased up to 0.25-0.5 as in non-treated samples . The TBA value, free fatty acid contents were increased with storage time as compared with the non-treated sample. Cryoprotectant effect on water soluble protein extractability was greater in pork than in beef muscle during frozen storage, especially in pork muscle treated CP-B, mixture of sorbitol, sucrose and sodium tripolyphosphate, as compared with non-treated sample. Cryoprotectant effect on salt soluble protein extractability during frozen storage was more pronounced in the beef muscle treated with CP-A which was mixture of sorbitol, mono sodium glutamate and sodium tripolyphosphate, and in the pork muscle treated with CP-B, mixture of sorbitol, sucrose and sodium tripolyphosphate than in the non-treated sample.

• Korean Journal of Food Science and Technology
• /
• v.26 no.4
• /
• pp.442-447
• /
• 1994

Effect of different mixing ratio of non-glutinous and glutinous rice on physical and rheological properties of extrudate prepared in a single screw extruder were examined. The extrusion conditions in term of screw speeds, moisture content and die temperature were 258 rpm, 18% and $120^{\circ}C$, respectively. The resisdence time distribution of the most of materials were within 30 second and small portion of them went up to 80 second. The expansion ratio was the highest value (2.93) for 70% of glutinous rice in the mixture, while the lowest value for 100% of non-glutinous rice. Breaking strength was in the range between 1,051g and 1,117g for $10{\sim}20%$ of glutinous rice in the mixture, while the lowest value (737g) for 80%r of glutinous rice. As the amount of glutinous rice increased, L and a values were increased and b value was decreased. The uncooked cold paste viscosity had 400 B.U. for 100% non-glutinous rice , while no peak for the 100% glutinous rice. As the amount of glutinous rice increased up to 100%, the water absorption index (WAI) was decreased, while water solubility index (WSI) was increased. The rheological properties of extrudate were accounted by the law of Oswald. The flow behavior index of extrudate was less than 1.0, which showed pseudoplastic behavior. Yield stress was the highest value for 20% of glutinous rice in the mixture and the lowest value for $80{\sim}100%$ of glutinous; rice. Number of air cell was between 128 and 159 for $80{\sim}100%$ of glutinous rice in the mixture, while $81{\sim}84%$ for $0{\sim}20%$ of glutinous rice. The degree of shapefact was increased more when the mixtures of glutinous and non-glutinous rice was used than when glutinous or non-glutinous rice was only used.

• Human Ecology Research
• /
• v.55 no.1
• /
• pp.13-26
• /
• 2017

This study investigated the latent groups depending on married working women's work-family spillover. The effects of factors that determine mental health subgroups and differences were also analyzed. Mixture modeling was applied to the Korean Longitudinal Survey of Women & Families to achieve the research objectives. The major findings of this study were as follows. First, there were four subgroups that could be defined according to the work-family spillover: mid-level spillover group (mid-positive and mid-negative spillover group), high-level spillover group (high-positive and high-negative spillover group), low-level spillover group (low-positive and low-negative spillover group), and high-negative and low-positive spillover group. Second, the results of mixture regression analysis to test the effect of eco-system variables showed that age, academic background, non-traditional family value, number of children, work hours, wage income, and availability of the maternity leave were significant determinants of the latent groups. The probability of classifying in the high-negative and low-positive spillover group increased when women showed a lower academic background and wage income, higher number of children and older age, and longer work hours than others. Third, the high-level spillover group, and the high-level spillover group showed the lowest stress and the lowest depression; however, the low-level spillover group reported the highest stress and the highest depression. Implications, limitations, and future directions were discussed based on the results.

• Journal of Pharmaceutical Investigation
• /
• v.10 no.3
• /
• pp.33-45
• /
• 1980

In order to increase the solubility of metoclopramide, various ratio coprecipitates with polyvinylpyrrolidone (M.W. 40,000) were prepared. The experiments of the solubility, physicochemical characteristics were quantitatively developed. The solubility increased as the ratio of rnetoclopramide to polyvinylpyrrolidone in metoclopramide-polyvinylpyrrolindone coprecipitate increased. In powder state, the dissolution rate of metoclopramide-polyvinylpyrrolidone coprecipitate was greater than that of metoclopramide and metoclopramide-polyvinylpyrrolidone physical mixture. Dissolution characteristics of non-disintegrating disk with constant surfacearea was in accord with Noyes-Nernst equation. The intrinsic dissolution rate, G, at $37^{\circ}C$ was $3.98{\times}10^{-7}M/cm^2{\cdot}min$ for metoclopramide, $2.26{\times}10^{-6}\;M/cm^2{\cdot}min$ for 1 : 5 metoclopramide-polyvinylpyrrolidone coprecipitate, respectively. Accordingly, activation energy of metoclopramide was 15,061cal/M, 9,178cal/M for 1 : 5 metoclopramide-polyvinylpyrrolidone coprecipitate and the activation energy decreased as the coprecipitate was formed. X-ray diffraction study revealed the fact that metoclopramide was crystalline, in contrast, there was no crystallinity evident in the 1 : 5 metoclopramide-polyvinylpyrrolidone coprecipitate. There was no difference between physical mixture and coprecipitate in TLC, UV and NMR studies. From the comparision between physical mixture and coprecipitate in IR spectrum, the interaction such as association between metoclopramide and polyvinylpyrrolidone was considered. But the association was easily dissociated in methanol solution.

• Journal of Powder Materials
• /
• v.10 no.1
• /
• pp.46-50
• /
• 2003

Lee et al. reported that a mixture of Cu and Ta, the combination of which is characterized by a positive heat of mixing, $\{Delta}H_{mix}$ of +2 kJ/㏖, can be amorphized by mechanical alloying(MA). It is our aim to investigate to what extent the MA is capable of producing a non-equilibrium phase with increasing the heat of mixing. The system chosen is the binary $Cu_{30}Mo_{70}$ with $\{Delta}H_{mix}$=+19 kJ/㏖. The mechanical alloying was carried out using a Fritsch P-5 planetary mill under Ar gas atmosphere. The vial and balls are made of Cu containing 1.8-2.0 wt.%Be to avoid contaminations arising mainly from Fe when steel balls and vial are used. The MA powders were characterized by the X-ray diffraction, EXAFS and thermal analysis. We conclude that two phase mixture of nanocrystalline fcc-Cu and bcc-Mo with grain size of 10 nm is formed by the ball-milling for a 3:7 mixture of pure Cu and Mo, the evidence for which has been deduced from the thermodynamic and structural analysis based on the DSC, X-ray diffraction and EXAFS spectra.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.3 no.5
• /
• pp.337-349
• /
• 1991

Heat and mass transfer rates to spray water droplets for spray transients in a high pressure vessel have been predicted by two different droplet models: the complete mixing model and the non-mixing model. In this process, the ambient fluid surrounding the droplets is a real-gas mixture composed of saturated steam and noncondensable hydrogen gas at high pressure. The physical properties of the mixture are estimated by applying the concept of compressibility factor and using appropriate correlations. A computer program, DROPHMT, to calculate the heat and mass transfer rates for two different droplet models has been developed. As an illustrative application of the computer program to engineering practices, heat and mass transfer rates to spray water droplets for spray transients in a Pressurized Water Reactor (PWR) pressurizer have been calculated, and the typical results have been provided.

• Transactions of the Korean hydrogen and new energy society
• /
• v.18 no.4
• /
• pp.374-381
• /
• 2007

In order to verify the feasibility of expansion of back-fire limit equivalence ratio in the hydrogen-fueled engine with external mixture, the characteristics of performance and combustion are experimentally analyzed with change of intake/exhaust valve timings under the fixed valve overlap period of $0^{\circ}$ CA(non-valve overlap period). These characteristics are also tested for the change of exhaust valve closing timing while intake valve opening timing is fixed to clear the main cause of back-fire occurrence. As the results, the less valve overlap period center is retarded, the more back-fire limit equivalence ratio increases and back-fire does not occurred after TDC. In addition, it was shown that the control of back-fire is dependent on intake valve opening timing than valve overlap period.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.20 no.11
• /
• pp.3655-3665
• /
• 1996

An analytical solution is presented for the conduction-dominated solidification of a binary mixture in a semi-infinite medium. The present approach differs from that of other solution by these four characteristics. (1) Solid fraction is determined from the phase diagram, (2) thermophysical properties in mushy zone are weighted according to the local solid fraction, (3) non-equilibrium solidification can be simulated and (4) the cooling condition of under-eutectic temperature can be simulated. Up to now, almost all analyses are based on the assumption of constant properties in mushy zone and solid fraction linearly with temperature or length. The validation for these assumptions, however, shows that serious error is found except some special cases. The influence of microscopic model on the macroscopic temperature profile is very small and can be ignored. But the solid fraction and average solid concentration which directly influence the quality of materials are drastically changed by the microscopic models. An approximate solution using the method of weighted residuals is also introduced and shows good agreement with the analytical solution. All calculations are performed for NH$_{4}$Cl-H$_{2}$O and Al-Cu system.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.4 no.4
• /
• pp.149-160
• /
• 2000

As systematic methodologies are required for the evaluation on the durability of reinforced concrete structure, it is necessary to study and examine every factor which deteriorates the durability of structures. This paper aims to define factors affecting rebar corrosion and to establish a basis for a prediction of serviceability, regarding a state of harmful corrosion as a state when crack begins on the surface of concrete. The study results are followings; The corrosive current has changed by types of mixture, and this property enables the evaluations of corrosion resistance by mixture and concrete cover. The specimen using AE superplasticizer has better corrosion-resistance properties than non-AE specimen, as well those having low W/C and high unit cement weight. The procedure for calculation of durable year in this study is able to use as an indicator to establish mixture factors such as unit cement weight, W/C, amount of admixture, etc.