• Computers and Concrete
• /
• 제25권3호
• /
• pp.255-266
• /
• 2020

This study presents comparation of fixed and viscos boundary condition effects on three-dimensional earthquake response and performance of a RCC dam considering linear and non-linear response. For this purpose, Cine RCC dam constructed in Aydın, Turkey, is selected in applications. The Drucker-Prager material model is considered for concrete and foundation rock in the nonlinear time-history analyses. Besides, hydrodynamic effect was considered in linear and non-linear dynamic analyses for both conditions. The hydrodynamic pressure of the reservoir water is modeled with the fluid finite elements based on the Lagrangian approach. The contact-target element pairs were used to model the dam-foundation-reservoir interaction system. The interface between dam and foundation is modeled with welded contact for both fixed and viscos boundary conditions. The displacements and principle stress components obtained from the linear and non-linear analyses are compared each other for empty and full reservoir cases. Seismic performance analyses considering demand-capacity ratio criteria were also performed for each case. According to numerical analyses, the total displacements and besides seismic performance of the dam increase by the effect of the viscous boundary conditions. Besides, hydrodynamic pressure obviously decreases the performance of the dam.

• 한국지반환경공학회 논문집
• /
• 제19권12호
• /
• pp.47-58
• /
• 2018

Duncan & Chang(1970)는 던컨-창 모델을 제안하면서 흙시료의 초기 접선계수와 극한 축차응력을 구하기 위하여 쌍곡선이론을 사용하여 삼축압축시험의 응력-변형률의 비선형관계를 변환된 변형률/축차응력-변형률의 선형관계로 재구성하였다. 그러나 변환된 응력-변형률 관계는 이론적으로 선형관계를 나타내지만, 실제로는 시험이 시작되는 변형률이 작은 구간과 시료가 파괴에 이르는 변형률이 큰 구간에서는 비선형관계를 보인다. 이러한 현상은 삼축압축시험의 응력-변형률 곡선이 완전한 쌍곡선 형태가 아님을 나타낸다. 따라서 변환된 응력-변형률 곡선의 전 구간에 대하여 선형 회귀분석을 실시하여 직선의 식을 구하게 되면, 비선형관계를 나타내는 구간의 범위에 따라 선형관계식의 산정에 편차가 발생하게 된다. 이러한 편차를 줄이기 위하여 본 연구에서는 변환응력-변형률 관계에서 비선형을 나타내는 초반과 종반 구간을 제외한 구간에 대하여 선형회귀분석을 실시함으로써 초기접선계수와 극한 축차응력을 산정하는 수정회귀분석법을 제안하였다. 수정회귀분석법을 검증하기 위하여, 풍화토의 다짐시료에 대하여 압밀-배수 삼축압축시험을 실시하였다. 삼축압축시험의 응력-변형률 곡선으로부터 구한 변환응력-변형률 관계에 대해서 수정회귀분석을 실시하여 Duncan et al.(1980)이 제안한 2점법으로 구한 결과와 비교하였다. 분석결과 수정회기분석법에 비해 Duncan의 2점법으로 산정한 초기 접선계수는 4.0% 크게, 그리고 극한 축차응력은 2.9% 작게 평가되었다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회 2차
• /
• pp.3-12
• /
• 2010

Vertical drains have been commonly used to increase the rate of the consolidation of dredged material. The installation of vertical drains additionally provides a radial flow path in the dredged foundation. The objective of this study develops a numerical model for 2-D axisymmetric non-linear finite strain consolidation considering self-weight consolidation to predict the effect of vertical drain in dredged foundation which is in process of self-weight consolidation. The non-linear relationship between the void ratio and effective stress and permeability during consolidation are taken into account in the numerical model. The results of the numerical analysis are compared with that of the self-weight consolidation test in which an artificial vertical drain is installed. In addition, the numerical model developed in this paper is the simplified analytical method proposed by Ahn et, al (2010). The comparisons show that the developed numerical model can properly simulate the consolidation of the dredged material with the vertical drains installed.

• Coupled systems mechanics
• /
• 제11권3호
• /
• pp.217-231
• /
• 2022

The present paper is concerned with a delamination analysis of a multilayered frame structure that exhibits non-linear creep behavior. A solution to the strain energy release rate is obtained by considering the time-dependent complementary strain energy in the frame. The mechanical behavior of the frame is treated by using a non-linear stress-strain-time relationship. The time-dependent solution to the strain energy release rate obtained in the present paper holds for a multilayered frame made of arbitrary number of adhesively bonded layers of different thicknesses and material properties. Besides, the dealamination is located arbitrary along the thickness. The solution to the strain energy release rate is verifiedby applying the J-integral approach. A parametric study of the strain energy release rate is carried-out. Two three-layered frame configurations are analyzed in order to evaluate the influence of the delamination crack location along the thickness on the strain energy release rate. The strain energy release is analyzed also for the case when a notch is cut-out in the inner delamination crack arm. The results obtained are compared with these for a frame without a notch.

• Advances in materials Research
• /
• 제12권1호
• /
• pp.15-29
• /
• 2023

In this paper, fracture analysis of a continuously inhomogeneous arch structure with two longitudinal cracks is developed in terms of the time-dependent strain energy release rate. The arch under consideration exhibits non-linear creep behavior. The cross-section of the arch is a rectangle. The material is continuously inhomogeneous along the thickness of the cross-section. The arch is loaded by two bending moments applied at its end sections. The mechanical behavior of the material is described by using a non-linear stress-strain-time relationship. The two longitudinal cracks are located symmetrically with respect to the mid-span of the arch. Due to the symmetry, only half of the arch is considered. Time-dependent solutions to strain energy release rate are obtained by analyzing the balance of the energy. For verification, time-dependent solutions to the strain energy release rate are derived also by considering the time-dependent complementary strain energy. The evolution of the strain energy release rate with the time is analyzed. The effects of material inhomogeneity, locations of the two cracks along the thickness of the arch and the magnitude of the external loading on the time-dependent strain energy release rate are evaluated.

• 한국지반공학회논문집
• /
• 제27권11호
• /
• pp.5-15
• /
• 2011

본 논문에서는 압축성이 매우 큰 준설 매립지반의 비선형 유한변형 압밀거동을 평가하기 위해 두 가지 압밀해석방법이 제시되었다. 이를 위해 동반논문에서 얻어진 초기간극비, 비선형의 간극비-유효응력 관계와 간극비-투수계수 관계를 비선형 압밀 물성치로 적용하였다. 단순화된 Morris의 간편 이론해(2002)와 대표적인 일차원 비선형 유한변형 압밀 프로그램인 PSDDF(Primary Consolidation, Secondary Compression, and Desiccation of Dredged Fill)의 해석결과를 일련의 실내실험을 통해 얻어진 인천 준설토와 카올리나이트의 자중압밀 침하거동과 비교하여, 실제 준설 매립지반의 장기간 비선형 유한변형 압밀거동을 모사하는데 두 방법의 적용이 타당함을 보였다. 또한, Craney Island 인공섬 사례분석을 통하여 적절한 비선형 유한변형 압밀 파라메터 선정의 중요성과 준설 매립지반의 압밀거동 평가시 PSDDF의 적용성을 제시하였다.

• Journal of Biosystems Engineering
• /
• 제41권3호
• /
• pp.273-280
• /
• 2016

Purpose: This experiment was conducted to detect water stress in terms of the moisture content of cucumber seedlings under water stress condition using a hyperspectral image acquisition system, linear regression analysis, and partial least square regression (PLSR) to achieve a non-destructive measurement procedure. Methods: Changes in the reflectance spectrum of cucumber seedlings under water stress were measured using hyperspectral imaging techniques. A model for estimating moisture content of cucumber seedlings was constructed through a linear regression analysis that used the moisture content of cucumber seedlings and a normalized difference vegetation index (NDVI). A model using PLSR that used the moisture content of cucumber seedlings and reflectance spectrum was also created. Results: In the early stages of water stress, cucumber seedlings recovered completely when sub-irrigation was applied. However, the seedlings suffering from initial wilting did not recover when more than 42 h passed without irrigation. The reflectance spectrum of seedlings under water stress decreased gradually, but increased when irrigation was provided, except for the seedlings that had permanently wilted. From the results of the linear regression analysis using the NDVI, the model excluding wilted seedlings with less than 20% (n=97) moisture content showed a precision ($R^2$ and $R^2_{\alpha}$) of 0.573 and 0.568, respectively, and accuracy (RE) of 4.138% and 4.138%, which was higher than that for models including all seedlings (n=100). For PLS regression analysis using the reflectance spectrum, both models were found to have strong precision ($R^2$) with a rating of 0.822, but accuracy (RMSE and RE) was higher in the model excluding wilted seedlings as 5.544% and 13.65% respectively. Conclusions: The estimation model of the moisture content of cucumber seedlings showed better results in the PLSR analysis using reflectance spectrum than the linear regression analysis using NDVI.

• 대한음성학회:학술대회논문집
• /
• 대한음성학회 2000년도 7월 학술대회지
• /
• pp.312-320
• /
• 2000

This presentation aims to explore some possibility of non-segmental phonetics usually ignored in phonetics education. In pedagogical phonetics, especially ESL/EFL oriented phonetics speech sounds tend to be classified in two criteria 1) 'pronunciation' which deals with segments and 2) 'prosody' or 'suprasegmentals', a criterion that deals with non-segmental elements such as stress and intonation. However, speech involves more dynamic processing. It is non-linear and multi-dimensional in spite of the linear sequence of symbols in phonetic/phonological transcriptions. No word is without pitch or voice quality apart from segmental characteristics whether it is spoken in isolation or cut out from continuous speech. This simply tells the dichotomy of pronunciation and prosody is merely a useful convention. There exists some room to consider dynamic non-segmental phonetics. Examples of non-segmental phonetic investigation, some of the analyses conducted within the frame of Firthian Prosodic Analysis, especially of the relation between vowel variants and foot types, are examined and we see what kind of auditory phonetic training is required to understand impressionistic transcriptions which lie behind the non-segmental phonetics.

• 한국강구조학회 논문집
• /
• 제22권1호
• /
• pp.33-42
• /
• 2010

막구조의 설계에서 막재료의 효율적인 사용을 위해서는 측지선에 의한 재단도 해석을 수행해야 한다. 막구조의 측지선 결정방법은 크게 측지요소(geodesic element)를 이용한 비선형 형상해석에 의한 방법과 임의의 곡면 형상에 대한 측지선 탐색에 의한 방법으로 나눌 수 있는데, 현재까지 이 두 가지 해석법은 모두 3절점요소에 대한 적용알고리즘 만이 제시되었고, 4절점 요소에 대한 해석법은 제시되지 않았다. 이는 막구조의 설계에서 4절점 요소의 적용을 어렵게 하는 가장 큰 요인이라고 할 수 있다. 본 연구에서는 3절점, 4절점 평면요소에 동시에 적용 가능한 측지선 결정알고리즘을 제시한다. 이를 위해 저자의 이전 연구를 발전시켜 명시적 비선형 해석법인 동적이완법을 비선형 측지선 형상해석에 적용하였다. 또한 3절점요소 뿐만 아니라 4절점요소에 대해서도 측지요소의 도입에 의한 형상해석이 가능하도록 하였으며, 4절점요소와 측지선요소에 의한 비선형 형상해석 및 재단도 해석예제를 통하여 본 연구에서 제시한 알고리즘의 정확성 및 효율성을 검증하였다. 따라서 본 연구에서 제안한 측지선 형상해석알고리즘은 형상해석, 응력해석, 재단도 해석과 관련된 일련의 해석과정에 대한 4절점요소의 적용성을 높일 수 있을 것으로 사료된다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2008년도 정기 학술대회
• /
• pp.60-64
• /
• 2008

According to previous research, welding-induced stress in steel structures can significantly affect the fatigue behaviour; it produces initial damage of weldiug part of structure locally and residual stresses reduce the fatigue strength after welding precess. In this study, through continuum damage mechanics, we can estimate the weldiug damage using the stress and strain history during welding process and the effect of welding residual stress for assessment of fatigue life. The variation of welding-induced stresses and strains need be traced precisely in advance for a reliable weldiug damage assessment. In this study, a damage and fatigue analysis techniques for steel structures with welding-induced residual stress are presented. First, We calculate the history of temperature according with welding process. And residual stress with a welding thermal history was evaluated by non-linear thermal stress analysis. Secondly, welding damage and fatigue life are estimated with kinetic damage law.