• ETRI Journal
• /
• v.32 no.3
• /
• pp.490-492
• /
• 2010

This letter proposes a robust feature extraction method using a spatially normalized mean for temporal ordinal measurement. Before computing a rank matrix from the mean values of non-overlapped blocks, each block mean is normalized so that it obeys the invariance property against linear additive and subtractive noise effects and is insensitive against multiplied and divided noise effects. Then, the temporal ordinal measures of spatially normalized mean values are computed for the feature matching. The performance of the proposed method showed about 95% accuracy in both precision and recall rates on various distortion environments, which represents the 2.7% higher performance on average compared to the temporal ordinal measurement.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.792-794
• /
• 2000

This paper describes the design and the analysis of electromagnetic system of Magnetic Switch using 2D parametric finite element method(EM-Pulse). Magnetic Switch is electrical equipment, which is widely used for switching on/off motors in industrial field. The transient state is simulated in order to calculate the response time of Magnetic Switch. The simulation is based upon a step-by-step integration of the electric circuit equations and the core movement. The contactor uses a permanent magnet for maintaining the closed state. The presented solution takes account of non-linear magnetic material property and spring force controlled by core position. The dynamic response of Magnetic Switch predicted by the simulation agrees closely with the required condition.

• Transactions on Electrical and Electronic Materials
• /
• v.10 no.6
• /
• pp.196-199
• /
• 2009

The practical applications of piezoelectric ceramics are applied not only under low electric field environment. Therefore, an examination for characteristics of PZT ceramics under the high electric field condition can contribute to reducing the susceptibility of multifarious applications and to facilitating production of control circuits. These contributions can lead to the expansion of industrial applications. In this research, we fabricated disk-type PZT ceramic samples using conventional methods, measured the resonance characteristics of these samples under from low to high voltage conditions and calculated the PZT constants.

• Wind and Structures
• /
• v.2 no.3
• /
• pp.189-200
• /
• 1999

In this paper, a new algorithm for active control design of structures is proposed and investigated. The algorithm preserves the decoupling property of the modal vibration equation and eliminates the spillover problem, which is the main shortcoming in the independent modal space control(IMSC) algorithm. With linear quadratic regulator(LQR) control law, the analytical solution of algebraic Riccati equation and the optimal actuator control force are obtained, and the control design procedure is significantly simplified. A numerical example for the control design of a tall building subjected to wind loads demonstrates the effectiveness of the proposed algorithm in reducing the acceleration and displacement responses of tall buildings under wind actions.

• Journal of the Semiconductor & Display Technology
• /
• v.14 no.3
• /
• pp.27-31
• /
• 2015

It was the electrical properties of ZnS treated by the annealing in a vaccum and an atmosphere conditions to reseached the leakage current effect of semiconductor devices. Most samples were shown the non-linear with unipolar properties, but the ZnS annealed at $100^{\circ}C$ in a vaccum was only observed no leakage current in a range of -20 V< voltage < 15 V. The crystallinity of ZnS with no leakage current was improved and optical property was also improved. Because the ambipolar characteristics and low leakage currents originated from the extension effect of a depletion width by electron-hole combination in the depletion layer.

• Steel and Composite Structures
• /
• v.15 no.5
• /
• pp.481-505
• /
• 2013

This paper focuses on thermal post-buckling analysis of functionally graded beams with temperature dependent physical properties by using the total Lagrangian Timoshenko beam element approximation. Material properties of the beam change in the thickness direction according to a power-law function. The beam is clamped at both ends. In the case of beams with immovable ends, temperature rise causes compressible forces and therefore buckling and post-buckling phenomena occurs. It is known that post-buckling problems are geometrically nonlinear problems. Also, the material properties (Young's modulus, coefficient of thermal expansion, yield stress) are temperature dependent: That is the coefficients of the governing equations are not constant in this study. This situation suggests the physical nonlinearity of the problem. Hence, the considered problem is both geometrically and physically nonlinear. The considered highly non-linear problem is solved considering full geometric non-linearity by using incremental displacement-based finite element method in conjunction with Newton-Raphson iteration method. In this study, the differences between temperature dependent and independent physical properties are investigated for functionally graded beams in detail in post-buckling case. With the effects of material gradient property and thermal load, the relationships between deflections, critical buckling temperature and maximum stresses of the beams are illustrated in detail in post-buckling case.

• Journal of KIISE:Databases
• /
• v.27 no.1
• /
• pp.79-89
• /
• 2000

For processing signature file in parallel, an effective signature file declustering method is needed. The Linear Code Decomposition Method(LCDM) used for the Hamming Filter may give a good performance in some cases, but due to its static property, it fails to evenly decluster signature file when signature are skewed. In addition, it has other problems such as limited scalability and non-determinism. In this paper we propose a new signature file declustering method, called Inner-product method, which overcomes those problems in the LCDM. The Inner-product method declusters signature file dynamically based on the signature difference which is computed by using signature inner product. we show through the simulation experiment that the Inner-product outperforms the LCDM under various data workloads.

• Journal of KIISE:Computer Systems and Theory
• /
• v.34 no.4
• /
• pp.132-137
• /
• 2007

A point-wise car-like robot moving in the plane changes its direction with a constraint on turning curvature. In this paper, we consider the problem of computing a shortest path of bounded curvature between a prescribed initial configuration (position and orientation) and a polygonal goal, and propose a new geometric proof showing that the shortest path is either of type CC or CS (or their substring), where C specifies a non-degenerate circular arc and S specifies a non-degenerate straight line segment. Based on the geometric property of the shortest path, the shortest path from a configuration to a polygonal goal can be computed in linear time.

• Applied Biological Chemistry
• /
• v.40 no.3
• /
• pp.225-231
• /
• 1997

Optimization theory was applied to a native and two imported soybeans. Failure stress and stress relaxation curve was measured with rheometer, and color was measured by colorimeter. The effects of each soybean upon the tofu texture were expressed through a non-linear canonical regression model and trace plot. Compared to the other imported soybeans, native soybean produced a higher strength in tofu texture, and showed the positive increase in viscoelastic properties such as instantaneous stress, equilibrium stress and relaxation time, whereas it had no effect on whiteness from reference blend, represented that native soy-bean showed the individual strength upon the selected rheological texture properties. Higher soaking ability in native soybean was selected as a new response for the optimization mixture process, and it contributed positively to the rheological properties of tofu. New soaking process control system during processing and desirability for the mathematical model should be applied for a better mixture design in varieties of soybeans.

• Earthquakes and Structures
• /
• v.26 no.2
• /
• pp.131-147
• /
• 2024

Damage caused by an earthquake depends on not just the intensity of an earthquake but also the region-specific construction practices. Past earthquakes in Asian countries have highlighted inadequate construction practices, which caused huge life and property losses, indicating the severe need to strengthen existing structures. Strengthening activities shall be proposed as per the proposed weighting factors, first at the higher weighted members to increase the capacity of the building immediately and thereafter, the other members. Through this study on gravity load-designed (GLD) buildings, relative weights are assigned to each storey and exterior and interior columns within a storey based on their contribution to the energy dissipation capacity of the building. The numerical study is conducted on mid-rise archetype GLD buildings, i.e., 4, 6, 8, and 10 stories with variable storey heights, in the high seismic zones. Non-linear static analysis is performed to compute weights based on energy dissipation capacities. The results obtained are verified with the non-linear time history analysis of 4 GLD buildings. It was observed that exterior columns have higher weightage in the energy dissipation capacity of the building than interior columns up to a certain building height. The damage in stories is distributed in a convex to concave parabolic shape from bottom to top as building height increases, and the maxima location of the parabola shifts from bottom to middle stories. Relative weighting factors are assigned as per the damage contribution. And the sequence for strengthening activities is proposed as per the computed weighting factors in descending order for regular RCC buildings. Therefore, proposals made in the study would increase the efficacy of strengthening activities.