• Journal of Satellite, Information and Communications
• /
• v.3 no.2
• /
• pp.18-25
• /
• 2008

A major drawback of Orthogonal Frequency Division Multiplexing (OFDM) system is high peak-to-average power ratio (PAPR) of the transmitted signal which introduces inevitable non-linear distortion in the transmission due to the amplifier non-linear property. This causes both in-band distortion and out of band spectrum re-growth. A polynomial based pre-distortion is estimated using the non-linear and inverse non-linear polynomial achieved through the Least Square Error (LSE) method. A new technique of PAPR reduction called 'Phase Realignment' (PR) is proposed which has a optimal effect in improving the BER performance as well as considerable reduction in the PAPR. In this paper we used the PR method along with the 'Peak Clipping' (PC) method is used before the pre-distortion to remove the high peak present in the non constant amplitude of the OFDM signal responsible to drive the amplifier in near saturation region for better performance of the system.

• Journal of Satellite, Information and Communications
• /
• v.3 no.1
• /
• pp.15-21
• /
• 2008

The high peak to average power ratio (PAPR) of OFDM (Orthogonal Frequency Division Multiplexing) system introduces inevitable non-linear distortion in the transmission due to the amplifier non-linear property. This causes both in-band distortion and out of band spectrum re-growth. In this paper we tried to compensate the problem by using polynomial based pre-distortion. Estimation of both the non-linear and inverse non-linear polynomial is achieved using the Least Square Error (LSE) method. Using these parameters closed form pre-distorter can be easily created. We also used the 'partial peak cancellation and clipping' method to remove the high peak present in the non constant amplitude of the OFDM signal responsible to drive the amplifier in near saturation region for better performance of the system

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.59 no.2
• /
• pp.141-145
• /
• 2010

Most of the industrial loads includes the non-linear load as well as the linear load because there are many kinds of power conversion equipments at the input stage of the load in distribution network. The non-linear load causes the distortion of voltage waveform at PCC because the non-linear load generates the harmonic current. As a result, various voltage harmonics are existed at PCC depending on the current harmonics from the non-linear load. And, a series reactor is generally connected to the power capacitor in series to attenuate the distortion of voltage waveform and to reduce an inrush current of power capacitor. Also, harmonic current of power capacitor is highly dependent on the series reactor because it is operated with the power capacitor as a passive filter against nonlinear loads. Then, these capacitors might be damaged by the excessive voltage and current harmonic components. In this paper, we presented how to select the capacitor and series reactor to meet the requirement of the voltage distortion at PCC and analyzed the voltage, current and capacity rating of the power capacitor by the computer simulation to ensure the safe operation of power capacitor when the voltage harmonics at PCC are existed. Also, the analysis data were compared with the experimental measurements for the verification.

• Proceedings of the IEEK Conference
• /
• 2002.07c
• /
• pp.2016-2018
• /
• 2002

An exact solution of the lossy linear tapered transmission line is derived. As its application, a simple design method of the quasi non-distortion lossy linear tapered transmission line in the time domain is described. A design example is presented to show the validity and usefulness of the method.

• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.592-594
• /
• 2004

Camera calibration is an important problem to determine the relationship between 3D real world and 2D camera image. The existing calibration methods can be classified into linear and non-linear models. The linear methods are simple and robust against noise, but the accuracy expectation is generally poor. In comparison, if the non-linearity, which is due mainly to lens distortion, is corrected, the accuracy can be better. However, as the optical features of lens are diverse, no non-linear method can be always effective for diverse vision systems. In this paper, we propose a new approach to correct the calibration error of a linear method using GMDH algorithm. The proposed technique is simple in concept and showed improved accuracy in various cases.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.27-30
• /
• 2005

In this paper, we designed and manufactured the distortion cancellation module which is able to compensate thermal-noise distortion by software The distortion cancellation algorithm not only bring forth system non-linear distortion by input level but also bring compensate component of distortion by thermal to get rid off distortion from now on. After TMS320C6711 DSP to recognize our algorithm, we manufactured the module for every kinds of system To evaluate efficiency of the distortion cancellation module, we designed and manufactured communication system. By measured result, if system output power is -3dBm equally, 12dB of ACLR has improved in 1MHz away from a center frequency, and also gain has increased up to 0.5dB.

• International Journal of Korean Welding Society
• /
• v.5 no.1
• /
• pp.29-34
• /
• 2005

Finite element analysis (FEA) and experimental studies on an elastic bending method have been performed in order to control the angular distortion at the fillet weldment for curved panel. Process parameters for the elastic bending method such as clamping span and release time were analyzed with reference to welding condition and geometric effect of the curved panel, which can minimize or prevent the angular distortion by producing a proper skin stress to the fillet weldment. The amounts of the angular distortion decrease almost in a linear manner with an increase in the skin stress. The skin stress required for non-angular distortion at the fillet weldment is strongly dependent on the plate thickness, not the heat intensity applied. The clamping span for obtaining uniform skin stress was defined as functions of the plate thickness and length of the free edge. Clamp should be removed after the fillet weldment is cooled down to room temperature for non-angular distortion. Effectiveness of the elastic bending method established was verified by its application to an actual curved panel.

• Journal of the Korean Solar Energy Society
• /
• v.32 no.spc3
• /
• pp.228-234
• /
• 2012

This paper presents the algorithm of the compensation of the grid current distortion caused by the grid voltage unbalance and distortion in 3-phase bi-directional DC to AC inverter. Usually 3-phase grid system has unbalance and distortion because of connecting 1-phase and non-linear load with 3-phase load using same input node. Controlling 3-phase inverter by general method under the unbalanced and distorted grid voltage, the grid current has distortion. This distortion of the grid current cause the grid voltage distortion again. So, it need to control the grid current balanced and non-distorted, even the grid voltage gets unbalanced and distorted. There are some complex method to compensate the gird current distortion. it sugest simple method to solve the problem. PSIM simulation is used to validate the proposed algorithm.

• Steel and Composite Structures
• /
• v.35 no.6
• /
• pp.717-727
• /
• 2020

The homotopy perturbation method (HPM) to predict the pre- and post-buckling behaviour of simply supported steel beams with rectangular hollow section (RHS) is presented in this paper. The non-linear differential equations solved by HPM derive from a kinematics where large twist and cross-sections distortions are considered. The results (linear and non-linear paths) given by the present HPM are compared to those provided by the Newton-Raphson algorithm with arc length and by the commercial FEM code Abaqus. To investigate the effect of cross-sectional distortion of beams, some numerical examples are presented.

• International Journal of Precision Engineering and Manufacturing
• /
• v.2 no.2
• /
• pp.11-16
• /
• 2001

This paper presents an in self-calibration method to corrent the Z-directional distortion of AFM(Atomic Force Microscopy).