• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.200-200
• /
• 2011

Hierarchical mesoporous ZSM-5 with enhanced mesoporosity was synthesized by microwave through the rapid assembly via ionic interaction between sulfonic acid functionalized ZSM-5 nano particles and cationic surfactant. The catalytic performance of enhanced accessibility due to mesoporosity and acidity were investigated in the alkylation of mesitylene with benzyl alcohol as alkylating agent. The effect of mole ratio of aromatic with benzyl alcohol, reaction time and alkylation agent were also studied. The enhanced mesoporosity and acidity of sulfonic acid functionalized mesoporous ZSM-5 induced activity enhancement compared with non-functionalized mesoporous ZSM-5, sulfonic functionalized mesoporous ZSM-5 synthesized by hydrothermal method and conventional microporous ZSM-5. The sulfonic acid functionalized mesoporous ZSM-5 showed much higher chemoselectivity of benzylated mesitylene than others, whereas the others mainly show dibenzyl ether as product. This significant difference in catalytic selectivity was resulted from the existence of mesopores, which definitely allowed the benzylation in mesopores.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2003.11a
• /
• pp.650-654
• /
• 2003

A major problem of nuclear energy is the production of radioactive wastes. Needs for more environmentally favorable method to decontaminate radioactive contaminants make the use of liqui $d^ercritical $CO_2$ as a solvent medium. In removing radioactive metallic contaminants under $CO_2$ solvent, two methods - use of chelating ligands and that of water in $CO_2$ emulsion-are possible. In the chelating ligand method, a combination of ligands that can make synergistic effects seems important. We discuss about the properties of microemulsion formed by F-AOT and that by non-ionic surfactant. By adding acid in water core, decontamination of metallic parts, soils were possible. The rate of metal surface dissolution to the microemulsion solution was measured by QCM. The possibility of recovering the surfactants after use is also mentioned.ed.

• Macromolecular Research
• /
• v.14 no.5
• /
• pp.545-551
• /
• 2006

Aqueous dispersions of pristine and functionalized (COOH- and $NH_2$-) multi-walled, carbon nanotubes (MWNTs) were prepared by using three types of surf act ants: sodium dodecyl sulfate (SDS, anionic), PEO-PPO-PEO (Pluronic P84, non-ionic), and poly(styrene/$\alpha-methyl$ styrene/acrylic acid) random terpolymer, i.e., alkali-soluble resin (ASR). The aggregate size, $\zeta-potential$, and storage stability of the MWNT aqueous dispersions were investigated by using dynamic light scattering and the turbidity method at room temperature. The exfoliation of the MWNT aggregates was determined by a UV-visible spectrophotometer and the morphology of the surfactant-coated MWNTs was observed by transmission electron microscopy (TEM). In all cases, ASR showed better dispersion stability with the smallest aggregate size, compared with the other surfactants, because of its unique molecular structure, i.e., randomly incorporated carboxylic acid groups and planar phenyl groups that can be irreversibly and effectively adsorbed on the MWNT surface. A predominantly-exfoliated morphology of MWNTs was observed in the presence of ASR from the strong intensity of the UV-vis spectrum at 263 nm.

• Journal of the Korean institute of surface engineering
• /
• v.37 no.6
• /
• pp.344-349
• /
• 2004

Emulsions were formed through putting small quantity of nickel electroplating solution into supercritical carbon dioxide, and then electroplating in the $sc-CO_2$ emulsions was conducted. It is an environmental-friendly technology that can solve the treatment of a large quantity of toxic plating wastewater, which is a big problem in the existing wet plating, and also can reduce secondary waste generation fundamentally. Supercritical carbon dioxide emulsions enhanced by ultrasonic horn were formed by non-ionic surfactant and nickel solution. Plating condition within emulsions was set up as 120bar and $55^{\circ}C$ through measurement of electrical conductivity following the pressure change. Experiments were conducted respectively against supercritical carbon dioxide emulsions electroplating and general chemical electroplating, and then their results were compared and analyzed. As the experiment result utilizing emulsions, plating surface was formed very evenly even with a small quantity of electroplating solution, and fine particles were plated compactly without any pinhole or crack due to hydrogenation, which occurs in general electroplating. Used electroplating solution can be reused through recovery process. Therefore, this technology will be able to be applied as new clean technology in electro-plating.

• Archives of Pharmacal Research
• /
• v.25 no.4
• /
• pp.485-492
• /
• 2002

The molecular fate of thyroglobulin (Tg) is controlled by oligomerization, a means of storing Tg at high concentrations, and deoligomerization. The oligomerization of bovine Tg are intermolecular reactions that occur through oxidative processes, such as disulfide and dityrosine formation, as well as isopeptide formation; disulfide formation is primarily responsible for Tg oligomerization. Here, the protein disulfide isomerase (PDI) and/or peroxidase-induced oligomerization of unfolded thyroglobulins, which were prepared by treating bovine Tg with heat, urea or thiol/urea, was investigated using SDS-PAGE analyses. In addition, the enzymatic oligomerization was compared with non-enzymatic oligomerization. The thermally-induced oilgomerization of Tg, dependent on glutathione redox state, was affected by the ionic strength or the presence of a surfactant. Meanwhile, PDI-catalyzed oligomerization, time and pH-dependent, was the most remarkable with unfolded/reduced Tg, which was prepared from a treatment with urea/DTT, while the thermally-unfolded Tg was less sensitive. Similarly, the oligomerization of unfolded/reduced Tg was also mediated by peroxidase. However, PDI showed no remarkable effect on the peroxidase-mediated oligomerization of either the unfolded or unfolded/reduced Tg. Additionally, the reductive deoligomerization of oligomeric Tg was exerted by PDI in an excessively reducing state. Based on these results, it is proposed that PDI catalyzes the oligomerization of Tg through the disulfide linkage and its deoligomerization in the molecular fate, and this process may require a specific molecular form of Tg, optimally unfolded/reduced, in a proper redox state.

• Journal of Energy Engineering
• /
• v.19 no.2
• /
• pp.116-120
• /
• 2010

Overall total length of hydraulic pipe to transport the hot water in the domestic district heating network is above 3,000 Km approximately. This long pipe network requires a lots of the transport pumping power by surface friction of fluid. In this study, the drag reduction(DR) of Amin Oxide $C_{18}$ as non-ionic surfactant according to the fluid velocity, temperature and surfactant concentration under the condition of above $80^{\circ}C$ fluid temperature were investigated experimentally. Results showed that new amin oxide $C_{18}$ surfactant had DR of maximum 30% in fluid temperature of $80^{\circ}C$ and had 15% DR in fluid temperature over $100^{\circ}$ under short time test condition. And amine oxide had 155 hours duration time to keep the DR characteristic in the fluid temperature of $80^{\circ}$ and 1000 ppm concentration. But duration time of DR was decreased when fluid temperature increased.

• Journal of the Korean Society of Groundwater Environment
• /
• v.5 no.4
• /
• pp.171-176
• /
• 1998

The effect of non-ionic surfactants added by hydroxides was studied to wash HOCs-contaminated soil. The kinds and concentrations of additives-mixed surfactants suitable for the soil washing were found. The effects of temperature on the soil washing were analyzed and the relations of HLB and cloud point were estabilished. As the base strength was increased, the washing efficiency was increased : NaOH＞KOH＞ Mg(OH)$_2$>Al(OH)$_3$. Washing efficiency was not enhanced by Al(OH)$_3$for coagulation effect. When NaOH was added to POE$\_$5/ washing efficiencies by 0.01 M and 0.1 M solutions were increased to 62.5% and 67.3%, respectively. At 1 M of NaOH washing efficiency was decreased to 4.2%. The Optimum concentration ratio of mixed surfactant ［POE$\_$5//POE$\_$14/] was 1.8%/1.2% without additives. But optimum concentration ratio of surfactants was changed to 1.2%/1.8% with 0.01 M of NaOH addition. The surface tensions and CMCs of mixed surfactant added by NaOH solutions were investigated. The addition of NaOH reduces the surface tension of more hydrophobic surfactants. The nonionic surfactant of higher HLB showed highed cloud point.

• Journal of Pharmaceutical Investigation
• /
• v.36 no.4
• /
• pp.271-276
• /
• 2006

Felodipine, a calcium-antagonist of dihydropyridine type, is a poorly water soluble drug and has very low bioavailability. As preceding studies, use of solid dispersion systems and surfactants(solubilizers) has been suggested to increase dissolution and to improve bioavailability of felodipine. But in case of solid dispersion systems, large amount of toxic organic solvents should be used and manufacturing process time become longer than conventional process. In case of using surfactants, as time elapsed, decreasing of dissolution rate of felodipine due to crystallization has been reported. In this study, Copovidon as a hydrophilic polymer and $Transcutol^{\circledR}$ as a surfactant were combined to formulations if order to increase dissolution of felodipine and conventional wet granulation process were applied to manufacturing of formulations. The effect of Copovidon and $Transcutol^{\circledR}$ on the dissolution oi felodipine was investigated in-vitro. When Copovidon and $Transcutol^{\circledR}$ used simultaneously, the dissolution rate of felodipine was prominently increased compared with when used separately and the maximum increase in the dissolution of felodipine was 5.8 fold compared to control. This is most probably due to synergy effect by combination of Copovidon and $Transcutol^{\circledR}$. Felodipine sustained release tablets were successfully formulated using several grades of HPMC as a release retarding agent. The stability of felodipine sustained release tablet was evaluated after storage at accelerated condition($40^{\circ}C/75%\;RH$) for 6months in HDPE(High density polyethylene) bottle. Neither significant degradation nor change of dissolution rate for felodipine was observed after 6months. In conclusion, felodipine sustained release tablet was successfully formulated and dissolution of felodipine, poorly water soluble drug, was prominently increased and also stability was guaranteed by using combination system of hydrophilic polymer and surfactant.

• Journal of the Korean Applied Science and Technology
• /
• v.31 no.4
• /
• pp.584-594
• /
• 2014

To increase of surface hydrophilicity of polymeric thin films is an important approaching technique for introduction of self-cleaning and/or antifogging properties on the surfaces of those films. In general, hydrophilic surface can be produced by coating non ionic surfactants or by increasing surface energy. Various non-ionic surfactants, such as Tween, Span, and PEG-PPG block copolymers were selected for our experiments, because they are cheap and well soluble in toluene system as well as they contain several reactive hydroxy fuctional groups with coupling agents. Blending conditions influence the PET film surface hydrophilicities. However, the introduction of only these surfactants on the surface of PET films did not show the high durability of hydrophilic properties after washing with water. To improve the durability two types of coupling agents such as epoxide and diisocyanate were adopted. Contact angle of water on hydrophilically coated PET film surface with 6 wt% of isophrone diisocyanate(IPDI) containing coating solution was reached to $8.7^{\circ}$, which was an indirect evidence for very high surface hydrophilicity. A light(500 nm of wavelength) transmittance value of coated PET film was changed only from 87% to 85% with keeping a good transparent property. This film can be usable for self-cleaning film industries.

• Journal of Soil and Groundwater Environment
• /
• v.13 no.2
• /
• pp.30-35
• /
• 2008

In this study, the feasibility of soil washing, chemical oxidation and sonication was investigated to treat lubricantcontaminated railroad soil. Tergitol, a non-ionic surfactant, was used as a washing agent with or without iso-propyl acohol as a cosolvent. However, it was not effective to remove lubricant from soil even though tergitol was the most effective washing agent for diesel-contaminated soil. The cosolvent reduced the overall washing efficiency. Chemical oxidation removed 30% of lubricant from contaminated soil. Soil washing after chemical oxidation extracted additionally 16-17% of lubricant. Sonication enhanced-soil washing showed enhanced overall efficiency of soil washing. Lubricant-contaminated soil should be remediated by the other technology used for diesel-contaminated soil.