• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 추계학술대회 논문집
• /
• pp.147-148
• /
• 2009

The water-like ionic liquids have been widely used to enable the proton conduction in ionic liquid based membranes at high temperature and anhydrous PEFCs. In this study, we synthesized various kinds of composite membranes based on hydrocarbon polymers having good thermal and mechanical stabilities at high temperatures and ionic liquids. The composite membrane consisting of hydrocarbon polymer and ionic liquid was characterized by thermogravimetric analyzer (TGA) and impedance spectroscopy. Consequently the non-aqueous composite membranes of a variety of hydrocarbon polymer and ionic liquids have good conductivity and thermal stability at high temperature conditions.

• 한국환경과학회지
• /
• 제13권12호
• /
• pp.1067-1078
• /
• 2004

Atmospheric particulate matters were collected by 8-stage non viable cascade impactor from October 2002 to August at Jeju City. Eight water-soluble ionic components $(Na^+,\;NH_{4}_{+},\;K^+,\;Ca{2+},\;Mg^{2+},\;CI^-,\;NO_{3}^-\;and\;SO_{4}^{2-})$ were analyzed by Ion Chromatography. The concentration of particulate matters and eight water-soluble ionic components were determined to investigate their size distributions. Particulate matters exhibited a tri-modal distribution with peak value around $0.9,\;4.0{\mu}m\;and\;9.5{\mu}m.$ In summer, the last peak value was lower than other season values likely due to particulate matter scavenged by rain water. Four ionic components $(Na^+,\;Ca^{2+},\;Mg^{2+}\;and\;CI^-)$ exhibited a bi-modal distribution in the coarse mode whereas three ionic components $(NH_{4}^+,\;K^+\;and\;SO_{4}^{2-})$ in the fine mode, with maximum peak value around $0.9{\mu}m.\;NO_{3}^-$ was found in both the coarse and the fine mode. The enrichment factor (E.F.) of each ionic components was calculated. Based upon E.F., it is considered that $Na^+,\;CI^-,\;and\;K^+$ in coarse paricle mode were delivered form oceanic source, but other components might have other source origins.

• 한국응용과학기술학회지
• /
• 제31권1호
• /
• pp.92-100
• /
• 2014

비이온계면활성제 가운데 솔비톨계 계면활성제인 Span을 이용해 수열합성법으로 수산화마그네슘을 합성하였다. 수산화마그네슘 합성의 전구체는 염화마그네슘과 수산화나트륨을 사용하였다. 비이온 계면활성제는 안정제와 분산제 그리고 표면 개질제로 적용하였다. 비이온 계면활성제를 첨가하였을 경우 수산화마그네슘 입자는 좀 더 작고 균일한 크기와 좋은 분산성을 나타내었으며, 소수성 성질을 나타내었다. 합성된 입자의 특성은 PSA, SEM, EDS, XRD 그리고 FT-IR을 통해 확인하였다. 기기 분석을 통해 개질 전과 후의 수산화마그네슘의 소수성, 분산성 특성을 비교하였다. 또한 실험조건에 따라 수산화마그네슘 입자의 표면 개질 특성 변화를 확인하였다.

• 전기화학회지
• /
• 제6권2호
• /
• pp.141-144
• /
• 2003

Proton conducting polymeric gels as the electrolytes of electrochemical capacitors have been prepared by two different methods: 1) swelling a polymethacrylate-based polymer matrix in aqueous solutions of inorganic and organic acids, and 2) polymerizing complexes of anhydrous acids and prepolymers with organic plasticizer. The FT-IR spectra strongly suggest that the carbonyl groups in the polymer matrix interact with protons from the doped acids. High ionic (proton) conductivity in the range of $6\times10^{-4}-4\times10^{-2}\;S\;cm^{-1}$ was obtained at room temperature for the aqueous gels. The non-aqueous polymer complexes showed rather low ionic conductivity, but it was about $10^{-3}\;S\;cm^{-1}\;at\;70^{\circ}C$ for the $H_3PO_4$ doped polymer electrolyte. The mechanisms of ion (proton) conduction in the polymeric systems are discussed.

• Computers and Concrete
• /
• 제13권2호
• /
• pp.149-171
• /
• 2014

This study presents the mathematical model for predicting chloride penetration into saturated concrete under non-isothermal condition. The model considers not only diffusion mechanism but also migration process of chloride ions and other chemical species in concrete pore solution such as sodium, potassium, and hydroxyl ions. The coupled multi-ionic transport in concrete is described by the Nernst-Planck equation associated with electro-neutrality condition. The coupling parameter taken into account the effect of temperature on ion diffusion obtained from available test data is proposed and explicitly incorporated in the governing equations. The coupled transport equations are solved using the finite element method. The numerical results are validated with available experimental data and the comparison shows a good agreement.

• 한국염색가공학회지
• /
• 제24권4호
• /
• pp.239-246
• /
• 2012

The binding isotherms of ionic dyes with Poly(vinylpyrrolidone) in aqueous solution were determined by the dynamic dialysis technique. The shape of the isotherms of cationic dye, C. I. Basic Red 18 with poly(vinlypyrrolidone) showed a partition type. It suggests that the binding involves a non-cooperative mode. Isotherms of an anion dye, a synthesized dye by coupling of diazotized m-trifluoromethylaniline with 2-naphthol-6-sulfonic acid, were sigmoid type and showed multimode interaction. The results were interpreted by the McGhee von Hippel theory. The thermodynamic parameters for the complex formation of the dyes-polymer were calculated from their temperature dependences of the intrinsic binding constant.

• 융복합기술연구소 논문집
• /
• 제3권2호
• /
• pp.1-6
• /
• 2013

The ionic liquids are known to potential alternative solvents capable of replacing the commercial solvents in various processes including those in nuclear fuel cycle. As to the material, a number of studies have already reviewed the interesting results and addressed the spectroscopic as well as electrochemical behaviors of metal elements included in spent nuclear fuels. It has found that the important properties of metal ions in TBP dissolved ILs have led the development of alternative technologies to traditional solvent extraction processes. On the other hand, the electrochemical deposition of metal ions in ILs have been investigated for the application of the solvents to aqueous as well as to non-aqueous processes. In this work, a review on the application of ILs in nuclear fuel cycle is briefly presented to understand the notable researches on ILs focusing on aqueous processes.

• Environmental Analysis Health and Toxicology
• /
• 제16권4호
• /
• pp.223-226
• /
• 2001

Acetanilide is a High Production Volume Chemical, which is produced about 2,300 tons/year in Korea as of 1998 survey. Most is used as an intermediate for synthesis of pharmaceuticals and dyes. The chemical is one of seven chemicals, which are under the frame of OECD SIDS program sponsored by National Institute of Environmental Research of Korea. Regarding the information on the environmental fate. bioconcentration is one of important factor to estimate the environmental tranfer. However, measurement of bioconcentration needs high expense and time. For this reason, OECD recommends to use BCFWIN model to estimate bioconcentration of organic chemicals, BCFWIN estimates the bioconcentration factor (BCF) of an organic compound using the log octanol-water partition coefficient (Kow) of the compound. Structures are entered into BCFWIN through SMITES (Simplified Molecular Input Line Entry System) notations. The BCFWIN method classifies a compound as either ionic or non-ionic. ionic compounds include carboxylic acids, sulfonic acids and salts of sulfonic acids, and charged nitrogen compounds (nitrogen with a + 5 valence such as quaternary ammonium compounds). All other compounds are classified as non-ionic. In this study, bioaccumulation of acetanilide was estimated using BCFWIN model based on SMIIES notation, chemical name data and partition coefficient as one of environmental fate/distribution of the chemical elements.

• 한국대기환경학회지
• /
• 제27권6호
• /
• pp.723-733
• /
• 2011

The ionic compositions were analyzed from the TSP samples collected at Gosan site in Jeju Island between 2000 and 2008, in order to examine the characteristics of atmospheric aerosols in accordance with the meteorological conditions. For the Asian Dust influence on the ionic compositions, the concentration ratios of $NH_4{^+}$, nss-${SO_4}^{2-}$, $NO_3{^-}$, and $K^+$ were about 1.2~2.3 during Asian Dust over Non-Asian Dust periods, noticeably that of nss-$Ca^{2+}$ was 6.8. Meanwhile the concentrations of nss-${SO_4}^{2-}$, $NO_3{^-}$, and $NH_4{^+}$ have increased as 1.8~4.4 times during the haze event periods, and 1.0~1.6 times during the fog and mist events. The ion balance has resulted that the anionic concentrations are relatively lower than the cationic concentrations, and the discrepancy appears more decidedly as a strong Asian Dust effect. The ammonium ion balance has shown that it exists as a mixture of $NH_4HSO_4$ and $(NH_4)_2SO_4$. The concentration ratios of nss-${SO_4}^{2-}/NO_3{^-}$ for Asian Dust, haze, fog-mist, and non-event periods were respectively 1.8, 5.9, 4.6, and 2.9, which were higher values compared to those in urban areas of China as well as other domestic regions. Especially, the high ratios of sulfur oxides could be presumed by the fact that the longrange transport of air pollutants from Asia continent might affect the atmospheric aerosols of Jeju Island.

• 약학회지
• /
• 제57권4호
• /
• pp.282-288
• /
• 2013

Zinc oxide nanoparticles (ZnONPs) are widely used in a variety of products and cosmetic products including paper, paints, plastics and sunscreen. However, information on the safety of ZnONPs are not enough and many publications suggest possible toxic effects on environmental and human health. Furthermore, physico-chemical characteristics of nanoparticles makes it hard to test toxicity using the test guidelines of chemicals adopted by regulatory bodies. In this study, stability of ZnONPs was investigated using different types of isotonic solution, which is important in the toxicity study of intravenous route. Precipitation, aggregation, size, zeta potential and morphology of ZnONPs were evaluated with different times and concentrations. Precipitation of ZnONPs were observed in ionic isotonic solution including phosphate-buffered saline, Kreb's-Ringer solution, physiological salt solution and cell culture media of DMEM (Dulbecco's Modified Eagle's Medium) with 10% fetal bovine serum. On the other hand, they were stable without precipitation in non-ionic isotonic solution such as 5% glucose and 2% glycerol, respectively, which are biocompatible for intravenous injection. The average size of ZnONPs in 5% glucose and 2% glycerol was stably maintained, which is less than 30 nm and very similar as that in water dispersion of ZnONPs, provided by the manufacturer. The stability was maintained during the experimental period of 5 days and diluted state up to 15,000 ppm. These data suggest that 5% glucose and 2% glycerol solution can be used for the vehicles of ZnONPs in the toxicity study of intravenous injection route.