• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 가을 학술발표회 논문집
• /
• pp.3-44
• /
• 1999

This paper discusses the lateral behavior of single and group piles in homogeneous and non-homogeneous(two layered) soil. In the single pile, the model tests were conducted to investigate the effects on ratio of lower layer height to embedded pile length, ratio of soil modules of upper layer to lower layer, boundary rendition of pile head and tip, embedded pile length, pile construction condition, ground condition with saturate and moisture state in Nak-Dong river sand. Also, in the group pile, the model tests were to investigate the effects on spacing-to-diameter ratio of pile, pile array, ratio of pile spacing, boundary condition of pile head and tip, eccentric load and ground condition. The maximum bending moment and deflection induced in active piles were found to be highly dependent on the relative density, pile construction condition, boundary condition of pile head and tip. Based on the results obtained, it was found that the decrease of lateral bearing capacity in saturated sand was in the range of 31% - 53% as compared with the case of dry sand. Also, in the group pile, a spacing-to-diameter of 6.0 seems to be large enough to eliminate the group effect for the case of relative density of 61.8%, and 32.8%, and then each pile in such a case behaves essentially the same as a single pile. In this study, the program is developed by using the modified Chang method which used p - y method and the exact solution of governing equation of pile and it can be used to calculate the deflection, bending moment and soil reaction with FDM in non-homogeneous soil. In comparing the modified Chang method with field test results, the predict results shows better agreement with measured results in field tests.

• Structural Engineering and Mechanics
• /
• 제61권2호
• /
• pp.295-316
• /
• 2017

Element based differential quadrature method (EDQM) has been applied to analyze static, stability and free vibration of non-homogeneous orthotropic rectangular plates of variable or stepped thickness. The Young's modulus and the density are assumed to vary in exponential form in X-direction whereas the thickness is assumed to vary linear, parabolic or exponential variation in one or two directions. In-plane loading is assumed to vary linearly. Various combinations of clamped, simply supported and free edge conditions (regular and irregular boundary) have been considered. Continuous plates could also be handled with ease. In this paper, formulation for equilibrium, buckling and free vibration problems is discussed and several numerical examples are solved using EDQM and compared with the published results.

• Membrane and Water Treatment
• /
• 제11권4호
• /
• pp.295-302
• /
• 2020

In this paper, theoretical approach with applications of the periodic wave solutions in an elastic material is applied by study the effect of initial stress, and rotation, on the radial displacement and the corresponding stresses in non-homogeneous orthotropic material. An Analytical solution for the elastodynamic equation has obtained concerning the component of displacement. The variations of stresses and displacements have shown graphically. Comparisons with previously published results in the absence of initial stress, rotation and non-homogeneity have made. Finally, numerical results have given and illustrated graphically for each case considered.

• Journal of applied mathematics & informatics
• /
• 제18권1_2호
• /
• pp.171-182
• /
• 2005

An analysis of the non-homogeneous term involved in the free surface condition for second order wave diffraction on a pair of cylinders is presented. In the computations of the nonlinear loads on offshore structures, the most challenging task is the computation of the free surface integral. The main contribution to this integrand is due to the non-homogeneous term present in the free surface condition for second order scattered potential. In this paper, the free surface condition for the second order scattered potential is derived. Under the assumption of large spacing between the two cylinders, waves scattered by one cylinder may be replaced in the vicinity of the other cylinder by equivalent plane waves together with non-planner correction terms. Then solving a complex matrix equation, the first order scattered potential is derived and since the free surface term for second order scattered potential can be expressed in terms of the first order potentials, the free surface term can be obtained using the knowledge of first order potentials only.

• 대한교통학회지
• /
• 제32권2호
• /
• pp.170-178
• /
• 2014

지금까지 교통사고발생과 기하구조와의 관계파악을 위한 모형정립에 관한 연구가 많이 이루어져 왔다. 이러한 연구들은 도로선형, 기하구조의 개선 혹은 위험구간 선정 등에 사용되어 교통사고 건수 및 사고심각도를 줄이는데 기여를 하여왔다. 하지만, 모형정립에 사용되었던 변수들은 자료수집 부족 등의 이유로 변수 혹은 대상구간이 가지고 있는 기하구조의 비동질성을 고려하지 못한 측면이 있었으며, 이는 모형 정립시 계수의 표준오차값이 과소 추정되어 모형전체의 신뢰성에 영향을 미쳐왔다. 따라서, 이번 연구에서는 사용되는 변수의 비동질성 고려가 모형의 결과에 미치는 영향을 알아봄으로써, 비동질성의 중요성을 파악하고자 하는데 목적이 있다. 그 결과, 모든 기하구조에 대한 비동질성을 고려하지는 못하였으나, 몇몇 사용된 기하구조 변수들의 경우, 의미 있는 결과가 도출되었다.

• 한국음향학회지
• /
• 제37권1호
• /
• pp.73-81
• /
• 2018

측면주사소나 영상의 화질은 소나 운용 주파수의 영향을 받는다. 저주파 측면주사소나 장비로 얻는 영상은 저화질 영상이며, 잡음이 화질 저하의 요소 중 하나가 된다. 균일한 잡음을 가정하는 광학 영상과는 달리. 측면주사소나 데이터의 잡음은 해양 환경(장비 소음, 신호 간섭 등)에 의해 발생한다. 또한 소나 신호의 전달 손실을 보상하고자 시간변환이득(Time-Varied Gain, TVG)을 수행하며, 이로 인해 측면주사소나 영상에 비균일 잡음이 생성된다. 본 논문에서는 측면주사소나 영상에 포함된 비균일 잡음을 제거하는 구조적 희소성에 기반한 압축 센싱 알고리즘 (Structural Sparsity based Compressive Sensing, SSCS)을 제안한다. 영상의 구조적 특징 도메인에서 국부적 및 비국부적 모델링을 동시에 구현하여 계수의 희소성을 보장하면서 비국부적 자가 유사성을 강화한다. 그리고 잡음의 비균일성을 고려하여 비국부적 모델링을 보상한다. 다양한 모의 실험을 통해 제안한 알고리즘의 우수성을 입증한다.

• Kyungpook Mathematical Journal
• /
• 제16권2호
• /
• pp.177-182
• /
• 1976

• Geomechanics and Engineering
• /
• 제35권2호
• /
• pp.149-163
• /
• 2023

This paper presents stability evaluation of unlined tunnels with semi-circular arch and straight sides (SASS) driven in non-homogeneous and anisotropic undrained clay. Numerical analysis has been conducted based on lower bound finite element limit analysis with second order cone programming under plane strain condition. The solutions will be used for the assessment of stability of unlined semi-circular arch tunnels and tunnels in which semi-circular roof is supported over rectangular/square sections. The stability charts have been generated in terms of a non-dimensional factor considering linear variation in undrained anisotropic strength for normally consolidated and lightly over consolidated clay with depth, and constant undrained anisotropic strength for heavily over-consolidated clay across the depth. The effect of normalized surcharge pressure on ground surface, non-homogeneity and anisotropy of clay, tunnel cover to width ratio and height to width ratio of tunnel on the stability factor and associated zone of shear failure at yielding have been examined and discussed. The geometry of tunnel in terms of shape and size, and non-homogeneity and anisotropy in undrained strength of clay has been observed to influence significantly the stability of unlined SASS tunnels.

• Interaction and multiscale mechanics
• /
• 제6권3호
• /
• pp.287-300
• /
• 2013

In this paper, the effect of impulsive line on the propagation of shear waves in non-homogeneous elastic layer is investigated. The rigidity and density in the intermediate layer is assumed to vary quadratic as functions of depth. The dispersion equation is obtained by using the Fourier transform and Green's function technique. The study ends with the mathematical calculations for transmitted wave in the layer. These equations are in complete agreement with the classical results when the non-homogeneity parameters are neglected. Various curves are plotted to show the effects of non-homogeneities on shear waves in the intermediate layer.

• 대한기계학회논문집A
• /
• 제24권1호
• /
• pp.69-78
• /
• 2000

The one-parameter singular expression for stresses and displacements near a crack tip has been widely thought to be sufficiently accurate over a reasonable re ion for any geometry and loading conditions. In many cases, however subsequent terms of the series expansion are quantitatively significant, and so we now consider the evaluation of such terms and their effect on the predicted crack growth direction. For this purpose the problem of a cracked orthotropic plate subjected to a biaxial load is analysed. It is assumed that the material is ideal homogeneous anisotropic. BY considering the effect of the load applied parallel to the plane of the crack, the distribution of stresses and displacements at the crack tip is reanalyzed. In order to determine values for the angle of initial crack extension we employ the normal stress ratio criterion.