• 전력전자학회논문지
• /
• 제15권6호
• /
• pp.417-424
• /
• 2010

단독운전이란 계통의 점검이나 사고로 인해 피더가 계통과 분리된 상태에서 태양광 발전설비가 멈추지 않고 운전을 계속하는 것을 의미한다. 정전된 배선 선로가 충전되어 공중감전, 기기손상, 작업원 감전 위험성이 있기 때문에 법적으로 사양이 규제되어 있다. 신재생에너지의 보급이 늘어남에 따라서 단독운전의 검출 기준이나 계통 보호 사양들이 점점 강화되면서 새로운 연구 방법에 대한 요구가 늘어나고 있다. 본 연구에서는 계통전원의 하모닉 성분을 이용한 단독운전 검출방법에 대해서 다룬다. 태양광 발전 시스템이 계통에 연결되었을 경우와 분리되었을 경우, 계통연결점에서의 등가 고조파 성분이 달라지는 사실에서 하모닉 성분의 변화량으로 단독운전을 판별하는 방법이다. 이 방법의 장점은 기존의 방법보다 비검출 영역을 줄일 수 있고 빠른 검출시간을 가질 수 있다. 또한 계통전원의 외란에 대해서도 강한 특성을 가진다. 고조파 모델링을 이용한 이론적인 해석과 고성능 32-bit 부동소수점 DSP를 이용한 실험결과로서 본 연구의 타당성을 입증하였다.

• Journal of Power Electronics
• /
• 제15권1호
• /
• pp.216-226
• /
• 2015

Grid synchronization is one of the key techniques for the grid-connected power converters used in distributed power generation systems. In order to achieve fast and accurate grid synchronization, a new phase locked loop (PLL) is proposed on the basis of the complex filter matrixes (CFM) orthogonal signal generator (OSG) crossing-decoupling method. By combining first-order complex filters with relation matrixes of positive and negative sequence voltage components, the OSG is designed to extract specific frequency orthogonal signals. Then, the OSG mathematical model is built in the frequency-domain and time-domain to analyze the spectral characteristics. Moreover, a crossing-decoupling method is suggested to decouple the fundamental voltage. From the eigenvalue analysis point of view, the stability and dynamic performance of the new PLL method is evaluated. Meanwhile, the digital implementation method is also provided. Finally, the effectiveness of the proposed method is verified by experiments under unbalanced and distorted grid voltage conditions.

• 전기학회논문지
• /
• 제63권10호
• /
• pp.1337-1346
• /
• 2014

Power system technologies in the area of smart grid are being converged with communication system technologies or information technologies(IT). This interdisciplinary action affects on two parts vigorously so that IT has become a essential part of power industry. But terminologies of two parts are confused and it is necessary that these are standardized to develop the industry. The writing system of the Open Korean Knowledge Dictionary for standardization of smart grid terminologies which are IEC TC 57 glossary and non-glossary is proposed. The writing system includes the process of collection, writing guideline and standardization of terminologies. Writing results of 90,000 terminologies for electricity, communication and computer fields including smart grid terminologies, which are registered in the Open Korean Knowledge Dictionary, are shown. The system provides the capability of collection and delivery of academic society opinions for the selected and interpreted terminologies through the internet for standardization and industry propagation of smart grid terminologies.

• 전자공학회논문지A
• /
• 제32A권1호
• /
• pp.222-233
• /
• 1995

For effective module generation, a detailed router which can handle complicated routing regions on multimple layers of interconnection under various constraints is necessary. In this paper, a new improved maze routing technique is described, which can find the shortest path for each net without allowing stacked vias. In this method, two cost values are stored at each grid point. The cost values represent the routing costs from the terminal of the net being routed to the grid point. One cost value shows the cost of the shortest path without making a via at the grid point and the other cost value shows that with making a via at the grid point. This is the first systematic maze routing technique which can find the shortest path without via-stacking.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2005년도 춘계 학술대회논문집
• /
• pp.153-158
• /
• 2005

Numerical simulations of two-dimensional steady incompressible lid-driven flow in a square cavity are presented to verify the validity of a new solution code(PowerCFD) with unstructured grids. The code uses the non-staggered(collocated) grid approach which is very popular for incompressible flow analysis because of its numerical efficiency on the curvilinear or unstructured grids. Solutions are obtained for configurations with a Reynolds number as high as 10,000 with both rectangular and hybrid types of unstructured grid mesh. Interesting features of the flow are presented in detail and comparisons are made with benchmark solutions found in the literature. It is found that the code is capable of producing accurately the nature of the lid-driven cavity flow at high Reynolds numbers.

• 한국콘텐츠학회논문지
• /
• 제8권6호
• /
• pp.74-81
• /
• 2008

단백질 상호작용 네트워크는 허브(hub)라 할 수 있는 상호작용 수가 많은 소수의 단백질과 상호작용수가 적은 다수의 단백질들로 구성된다. 최근 들어 여러 연구들에서 허브 단백질이 비 허브(non-hub) 단백질보다 상호작용 네트워크에 필수적인 단백질일 가능성이 높다고 보고되고 있다. 이러한 현상을 중심-치명 룰(centrality-lethality rule)이라 하는데, 이는 복잡계 네트워크에서 허브단백질의 중요성 및 네트워크 구조의 중요성을 설명하기 위한 방법으로 폭넓게 신뢰받고 있다. 이에 본 논문에서는 중심-치명 룰이 항상 옳게 적용되는지를 확인하기 위해 Uetz, Ito, MIPS, DIP, SGD, BioGRID와 같은 효모에 관한 공개된 모든 단백질 상호작용 데이터베이스들을 분석하였다. 흥미롭게도, 상호작용 데이터가 적은 데이터베이스들(Uetz, Ito, DIP)에서는 중심-치명 룰을 잘 나타냈지만 상호작용 데이터가 대용량인 데이터 베이스들(SGD, BioGRID)에서는 중심-치명 룰이 잘 맞지 않음을 확인하였다. 이에 따라 SGD와 BioGRID 데이터베이스로 부터 얻은 상호작용 네트워크의 특징을 분석하고 DIP 데이터베이스의 상호작용 네트워크와 비교하였다.

• 에너지공학
• /
• 제17권4호
• /
• pp.218-226
• /
• 2008

가압 경수로의 주요 기기에서 발생할 수 있는 과도 2상 유동(Two-phase flow) 현상에 대한 해석을 수행하기 위해 원자로 기기 열수력 해석 코드를 개발 중에 있다. 개발중인 기기 열수력 해석 코드는 지배 방정식으로 Two-phase, three-field model을 사용하고 있으며, 복잡한 기하학적 형상의 원자로 기기를 모사하기 위해 비정렬 격자계(Unstructured grid)를 활용하고 있다. 수치해석 기법으로는, 원자로 계통 해석코드 REIAP5가 사용 중이며 대부분의 원자로 내 2상 유동 조건에서 안정적이며 정확하다고 알려진 Semi-implicit 방법을 적용하였다. 그러나 기존의 Semi-implicit 방법은 1차원, 엇갈림격자(Staggered grid)에 대해 개발되었기 때문에 이를 다차원, 비정렬, 비엇갈림 격자(Non-staggered grid)에 적용하기 위해 기존의 Semi-implicit 방법을 수정하였다. 본 논문에서는 수정된 Semi-implicit 방법을 소개하고 이를 이용해 수행한 예비 계산결과를 수록하였다.

• 한국전산유체공학회지
• /
• 제21권2호
• /
• pp.62-69
• /
• 2016

It has been highly demanded to improve the accuracy of CFD(Computational Fluid Dynamics) methods for the assessment of the hydrodynamic performance of marine propellers in cavitating and non-cavitating flows. This paper presents a validation study on the numerical simulation of the tip vortex flow of a non-cavitating marine propeller SVA VP1304. The calculations are carried out by using the Reynolds averaged Navier-Stokes(RANS) approach, where the Reynolds Stress Model(RSM) is used for turbulence closure. The present paper contains a grid dependence test for the propeller open water simulations and a special emphasis is placed on conducting a local grid adaptation on the blade tip and in the tip vortex to reasonably reproduce the velocity and the pressure in the tip vortex flow field. The numerical results are compared with the experimental validation data, which are published in the second International Symposium on Marine Propulsors 2011(SMP'11). The present numerical results show a reasonable agreement with the experiments.

• 한국전산유체공학회지
• /
• 제12권2호
• /
• pp.37-45
• /
• 2007

The hybrid Cartesian/immersed boundary method is applied to simulate fluid-structure interaction of a two-dimensional orbiting flexible foil. The elastic deformation of the flexible foil is modelled based on the dynamic equation of a thin-plate. At each time step, the locations and velocities of the Lagrangian control points on the flexible foil are used to reconstruct the boundary conditions for the flow solver based on the hybrid staggered/non-staggered grid. To test the developed code, the flow fields around a flapping elliptical wing are calculated. The time history of the vertical force component and the evolution of the vorticity fields are compared with recent other computations and good agreement is achieved. For the orbiting flexible foil, the vorticity fields are compared with those of the case without the deformation. The combined effects of the angle of attack and the orbit on the deformation are investigated. The grid independency study is carried out for the computed time history of the deformation at the tip.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.515-518
• /
• 2006

A vibration test for a cylindrical rod inserted on the grid support structure was tested using the sine sweep excitation method with closed loop force control. The effect of the mounting location of a test rod on the vibration characteristics of a rod continuously supported by the full size($16{\times}16$) grid support was identified. An electromagnetic vibration shaker, non-contact displacement sensor and HP/VXI data acquisition device were used and TDAS software was also used as a data sampling and processing tools. The natural frequencies and mode shape of the test rod were consistent with the previous works of a rod vibration test with partial grids($3{\times}3,\;5{\times}5\;and\;7{\times}7$). The frequency characteristics of the rod according to the mounting location were shown clear discrepancies, but mode shapes were nearly same. As the test rod closes to the bottom clamping region of the spacer grid, peak vibration amplitudes of the rod become smaller.